User Manual

Chapter 2: Hardware setup
2-28
Back side
ThebacksideoftheSATA/SASbackplanefacestherearpanelwheninstalled.Thisside
includesthepowerconnectorsandSATA/SASinterfacesforthemotherboardSerialATA
connectorsortheSAScard.
SGPIO1
SGPIO2
BPSMB1
U1
CON1
CON2
CON3
CON4
SGPIO_SEL1
SGPIO3
Connectors Description
SGPIO1
ConnectstoSATASGPIO1connectoronthemotherboard
SGPIO2
ConnectstoSGPIOconnectoroftherstsetofcableson
thePIKEcard
SGPIO3
ConnectstoSGPIOconnectorofthesecondsetofcables
onthePIKEcard
SGPIO_SEL1
MovetheSGPIO_SEL1jumperontheSATA/SAS
backplanetopins2–3wheninstallingthePIKERAIDcard.
BPSMB1
Connects to AUX_PANEL1connectoronthemotherboard
U1
Connects to 4-pin plug of the power supply
CON1/CON2/
CON3/CON4
ConnectstoSATA/SASconnectorsonthemotherboard
SGPIO_SEL1 (Short pins [2-3])