User Manual

Chapter 4: Motherboard information
4-16
4. RAID selection jumper setting (3-pin RAID_SEL1)
This jumper allows you to select the PCH SATA RAID mode to use LSI MegaRAID
software or Intel
®
Rapid Storage Technology enterprise 3.0 RAID. Place the jumper
caps over pins 1–2 if you want to use the LSI MegaRAID software RAID Utility (default);
otherwise, place the jumper caps to pins 2–3 to use the Intel
®
Rapid Storage Technology
Enterprise Option ROM Utility.
5. ME firmware force recovery setting (3-pin ME_RCVR1)
This jumper allows you to force Intel Management Engine (ME) boot from recovery mode
when ME become corrupted.