User Manual

2-19
ASUS TS700-E9 Series
2.7 Expansion slots
Remove the metal slot cover before installing an expansion card.
Ensure to unplug the power cord before installing or removing expansion cards. Failure to
do so may cause severe damage to the motherboard and other system components!
2.7.1 Installing an expansion card
1. Before installing the expansion card, read the documentation that came with it and
make the necessary hardware settings for the card.
• Supports up to two double-decked GPU cards, depending on the configuration and
other key parts, such as the CPU or PSU options.
• Ensure to check the power requirements of your expansion cards, as different voltage
values (220V / 110V) may result in different power ratings (1200W / 1000W) and may
influence the amount of expansion cards your system may support.
2. Remove the side chassis cover. Lay the system on its side on a flat, stable surface.
4. Remove the metal slot cover.
3. Release the screws on the metal slot
cover where you wish to install the
expansion card.