User Manual
6-18
Chapter 6: RAID Conguration
6.4 ASMedia 106x RAID Manager
The ASMedia
®
106x RAID Manager allows you to create RAID 0, and RAID 1 set(s) from
Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the
Southbridge.
To launch the ASMedia
®
106x RAID Manager:
1. Turn on the system.
2. During POST, press <Ctrl>+<r> to display the RAID Manager main menu.
Before you proceed, ensure that you have installed the Serial ATA hard disk drives. You
can refer to the Installing hard disk drives section in this manual for more information.
The navigation keys at the right of the screen allow you to move through the menus
and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and may not
exactly match the items on your screen.
Asmedia 106x RAID Manager v1.07
>> Select Configure Controller
Enter : Confirm the selection
Esc : Exit
, : Move to Up/Down item
B03:D00:F0 Normal Mode (non-RAID)