User Manual

Chapter 3: Installation Options
3-2
3.1 Preparing the system for rack mounting
• Theitemsrequiredfortheoptionalcongurationsdescribedinthischapterarenot
includedinthestandardbarebonesystempackage.Theseitemsarepurchased
separately.
• Werecommendthatyouallotatleast1Uspaceabovetheserversystemtoensure
optimalthermalperformance.
Removing the footpads
Refertosection2.9.3Chassisfootpadsforinstructionsonremovingthefootpads.
Removing the top cover
Unscrewandslidethetopcovertoward
therearpanel,andthenliftitupfromthe
chassis.
3.2 Attaching the inner rail to the server
2. Slidetheinnerrailintotherailontopof
the chassis.
3. Alignthescrewholesontheinnerrail
andthechassistop,andthensecurethe
inner rail to the chassis top with screws.
1. Pressthelockonsideoftherail
andslidetheinnerrailoutfromthe
rackmountrailkit.