User Manual

Chapter 3: Installation Options
3-4
3.4 Mounting the server to the rack
To mount the server to the rack:
1. Aligntheserverrailswiththerackrails.
2. Pressthelockonsideoftherailandslidetheserverintotherack.
3. Whentheserverisfullyslideintotherack,securebothsidesusingscrews.
5. Findtherear1Uspacethatcorrespondstothefront1Uspacewhereyouattachedthe
rail.Driveintwoscrewsontheouterholestosecuretherearend.
6. Fromtherackfront,ndthecorresponding1Uspaceforthesecondrailpair.
7. Repeat steps 3–6 to attach the second rail pair.
3. Alignthefrontendholesofarackrail
pairtothe1Uspace.
4. Driveintwoscrewsontheouterholesto
securethefrontend.