User Manual

ASUS TS700-E9 Series
4-9
8. VGA controller setting (3-pin VGA_SW1)
This jumper allows you to enable or disable the onboard VGA controller. Set to pins
1–2 to activate the VGA feature.
• If a VGA Card is installed into a PCI Express x16 Slot, the onboard VGA function will
still be enabled.
• BMC Remote Management Function will still be available when VGA controller
settings is set to disabled, but the display will be disabled on the client device.
Ensure the ATX power supply is switched off or the power cord is detached from the power
supply when enabling or disabling the VGA controller settings using this jumper.