User Manual

DDR4 2933 Qualified Vendors List (QVL)
Timing Voltage DIMM socket support (Optional)
1 DIMM 2 DIMM 4 DIMM
CORSAIR CMK128GX4M8Z2933C16(Ver4.31) 8x 16GB 16-18-18-36 1.35 ● ● ●
CORSAIR CMK128GX4M8Z2933C16(Ver4.31)(XMP) 8x 16GB 16-18-18-36 1.35 ● ● ●
G.SKILL F4-2933C16D-16GFX(XMP) 2x 8GB 16-16-16-36 1.35 ● ●
G.SKILL F4-2933C16Q-32GFX(XMP) 4x 8GB 16-16-16-36 1.35 ● ● ●
• 1 DIMM: Supports one module inserted in any slot as single-channel memory configuration
• 2 DIMM: Supports one pair of modules inserted into either the A2 slots or the B2 slots that operates in a dual-channel memory configuration
• 4 DIMM: Supports 4 modules inserted into all slots as two pairs DIMMs operating in a dual-channel memory configuration
-Do not combine DIMMs from multiple kits—even ones of the same make and model. Mixing and matching DIMMs can result in failure to boot.
-Purchasing single DIMMs is not recommended because compatibility cannot be guaranteed.
For the best results, please ensure all memory modules are of the same version or have the same date code (D/C) from the same vendor. Check with the
memory vendor to get the correct memory modules.
-The default DIMM frequency depends on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value.
-The stability and compatibility of memory modules with XMP profiles that operate beyond the JEDEC memory standard are not guaranteed.
The stability and compatibility of these memory modules depend on the CPU’s capabilities and other installed devices.
Vendors
Part No.
Size
TUF B360-PLUS GAMING