User Manual
Table Of Contents
- 目录
- 1. 认识 BIOS 程序
- 2. BIOS 程序设置
- 3. 我的最爱(My Favorites)
- 4. 主菜单(Main Menu)
- 5. Ai Tweaker 菜单(Ai Tweaker menu)
- 6. 高级菜单(Advanced menu)
- 6.1 可信任计算(Trusted Computing)
- 6.2 AMD fTPM 设置(AMD fTPM configuration)
- 6.3 AMD CBS
- 6.4 CPU 设置(CPU Configuration)
- 6.5 PCI 子系统设置(PCI Subsystem Settings)
- 6.6 USB 设置(USB Configuration)
- 6.7 网络协定堆栈设置(Network Stack Configuration)
- 6.8 NVMe 设置(NVMe Configuration)
- 6.9 HDD/SSD SMART 信息(HDD/SSD SMART Information)
- 6.10 SATA 设置(SATA Configuration)
- 6.11 APM 设置(APM Configuration)
- 6.12 内置设备设置(OnBoard Devices Configuration)
- 6.13 NB 设置(NB Configuration)
- 6.14 AMD PBS
- 6.15 AMD 超频(AMD Overclocking)
- 7. 监控菜单(Monitor menu)
- 8. 启动菜单(Boot menu)
- 9. 工具菜单(Tool menu)
- 10. 退出 BIOS 程序(Exit menu)
- 11. 升级 BIOS 程序
PRIME / ProArt / TUF GAMING AMD 600 系列 BIOS 用戶手冊
37
以下的項目僅當 SNP Memory (RMP Table) Coverage 設置為 [Custom] 時才會
出現。
AmountofMemorytoCover
以十六進位為單位指定被覆蓋的系統內存。設置值有:[0] - [100000]
SMEE
本項目用來啟動或關閉內置 SMEE。設置值有:[Disable] [Enable] [Auto]
ActiononBISTFailure
本項目用來設置當檢測到 CCD BIST 錯誤時的動作。設置值有:[Do nothing]
[Down-CCD] [Auto]
DFCommonOptions
MemoryAddressing
Memory interleaving
本項目用來啟用或關閉內存交錯。設置值有:[Disabled] [Auto]
Memory interleaving size
設置內存交錯的大小。有效數值為 AUTO、256 位、512 位、1 千
字節或 2 千字節。此選項可決定開始交錯的位址(位元 8、9、10
或 11)。設置值有:[256 Bytes] [512 Bytes] [1KB] [2KB]
DRAM map inversion
設置值有:[Disable] [Enable] [Auto]
Location of private memory regions
設置值有:[Distributed] [Consolidated] [Consolidated to 1st
DRAM pair] [Auto]
ACPI
ACPI SRAT L3 Cache as NUMA Domain
[Disabled] 每個插槽的內存地址 \ NUMA 節點會被宣告。
[Enabled] 系統中的每個 CCX 會被宣告為單獨的 NUMA 網域。
[Auto] 設為默認值。
DisableDFtoexternaldownstreamIPSyncFloodPropagation
本項目可以啟用或關閉禁止 DF 到外部 IP 同步 SYN 洪水攻擊。設置值
有:[Sync flood disabled] [Sync flood enabled] [Auto]
DisableDFsyncfloodpropagation
本項目可以啟用或關閉 DF 同步 SYN 洪水攻擊。設置值有:[Sync flood
disabled] [Sync flood enabled] [Auto]