User Manual

PRIME / TUF GAMING Intel
®
500 系列 BIOS 使用手冊
19
ReadTimingCentering1D
設定值有：[Auto] [Disabled] [Enabled]
DimmODTTraining*
本項目用來開啟或關閉 DIMM On-Die Termination Training。
設定值有：[Auto] [Disabled] [Enabled]
以下項目只有在 Dimm ODT Training 設定為 [Disabled] 時才會出現。
MaxRTT_WR
設定值有：[ODT Off] [120 Ohms]
DIMMRONTraining*
設定值有：[Auto] [Disabled] [Enabled]
WriteDriveStrength/Equalization2D*
設定值有：[Auto] [Disabled] [Enabled]
WriteSlewRateTraining*
設定值有：[Auto] [Disabled] [Enabled]
ReadODTTraining*
設定值有：[Auto] [Disabled] [Enabled]
ReadEqualizationTraining*
設定值有：[Auto] [Disabled] [Enabled]
ReadAmplifierTraining*
設定值有：[Auto] [Disabled] [Enabled]
WriteTimingCentering2D
設定值有：[Auto] [Disabled] [Enabled]
ReadTimingCentering2D
設定值有：[Auto] [Disabled] [Enabled]
CommandVoltageCentering
設定值有：[Auto] [Disabled] [Enabled]
WriteVoltageCentering2D
設定值有：[Auto] [Disabled] [Enabled]
ReadVoltageCentering2D
設定值有：[Auto] [Disabled] [Enabled]
LateCommandTraining
設定值有：[Disabled] [Enabled] [Auto]
RoundTripLatency
設定值有：[Auto] [Disabled] [Enabled]
TurnAroundTimingTraining
設定值有：[Disabled] [Enabled]