User's Manual
Table Of Contents
- Accessory Kit Contents
- Installation Guide
- Remove the Side Panels
- Install the Power Supply Unit (PSU)
- Install the Cooler & RAM on the Motherboard
- Install the I/O Shield
- Install the Motherboard Unit
- Attach the Front I/O Connectors
- Addressable RGB Controller Hub
- Install the PCI-E Card
- Install the 2.5” Drives
- Install the 3.5” / 2.5” Drives
- Installation and Maintenance of the Dust Filters
- Install the Headphone Hanger
- Additional Information
- Safety Information
11
Turn On: Press the LED button if the fan LEDs are off.
Turn Off: Press the LED button for 3 seconds
Default: Rainbow pattern.
Multi-pattern Change: Press the LED button for 0.5 seconds.
(Please refer to www.asus.com for more details)
AURA Sync
(Change to MB Mode):
Press the LED button for 5 seconds.
The fan LED will turn off, then blink Green 2
times rapidly.
• MB Mode only works when the control board is
connected to the motherboard’s Addressable
RGB header.
• Compatible with AURA Sync.