Serie VG24V Monitor LCD Guida dell’utente
Contenuti Avvisi .......................................................................................................... iii Informazioni sulla sicurezza....................................................................... iv Cura e pulizia............................................................................................... vi 1.1 Benvenuto!.................................................................................... 1-1 1.2 Contenuti della confezione...................................
Avvisi Dichiarazione della Commissione Federale per le Comunicazioni Questo dispositivo è conforme alla Parte 15 delle Norme FCC. Il funzionamento è soggetto alle seguenti due condizioni: • Questo dispositivo non può provocare interferenze dannose. • Questo dispositivo deve poter ricevere qualsiasi interferenza, incluse quelle che potrebbero causare un funzionamento indesiderato.
Informazioni sulla sicurezza iv • Prima di configurare il monitor, leggere attentamente tutta la documentazione fornita. • Per prevenire pericoli di incendi o scosse elettriche, non esporre il monitor a pioggia o umidità. • Non cercare di aprire l’alloggiamento del monitor. Le alte tensioni pericolose all’interno del monitor potrebbero causare gravi lesioni fisiche. • Se l’alimentatore è rotto, non cercare di ripararlo da soli. Contattare un tecnico qualificato o il proprio rivenditore.
AVVISO L'uso di cuffie o auricolari diversi da quelli specificati potrebbe causare la perdita dell'udito a causa di eccessiva pressione acustica.
Cura e pulizia • Prima di sollevare o spostare il monitor, è meglio scollegare i cavi e il cavo di alimentazione. Osservare le corrette tecniche di sollevamento durante il posizionamento del monitor. Quando si solleva o trasporta il monitor, afferrarlo dai bordi. Non sollevare il display dal supporto o dal cavo. • Pulizia. Spegnere il monitor e scollegare il cavo di alimentazione. Pulire la superficie del monitor con un panno non abrasivo privo di lanugine.
Dove trovare ulteriori informazioni Consultare le seguenti fonti per ulteriori informazioni e per gli aggiornamenti su prodotti e software. 1. Siti web ASUS I siti web ASUS in tutto il mondo forniscono informazioni aggiornate su hardware e software ASUS. Consultare http://www.asus.com 2. Documentazione opzionale La confezione del prodotto potrebbe includere documentazione opzionale aggiunta dal rivenditore. Tali documenti non fanno parte della confezione standard.
1.1 Benvenuto! Congratulazioni per l'acquisto del monitor LCD ASUS®! L’ultimo monitor LCD widescreen ASUS offre immagini nitide, più ampie e più luminose, oltre ad una miriade di caratteristiche che migliorano la visualizzazione. Con queste funzioni si godrà della comodità e della deliziosa esperienza visiva fornita dal monitor! 1.
1.3 Montaggio del monitor Per assemblare il monitor: • Durante il montaggio del braccio o della base del monitor, si raccomanda di lasciare il monitor all'interno della sua confezione in polistirolo. 1. Allineare il foro della vite sul braccio conla vite fornita insieme alla base. Inserire quindi la base nel braccio. 2. Fissare la base al braccio serrando la vite fornita in dotazione. 2 1 3 • 1-2 Dimensione della vite di base: M6 x 10mm.
1.4 Collegamento dei cavi 1.4.1 Retro del monitor LCD 6 DCIN 5 HDMI-1 HDMI-2 4 3 1. Porta uscita cuffie 2. DisplayPort 3. Porta HDMI-2 4. Porta HDMI-1 5. Porta ingresso DC 6.
1.5 Presentazione del monitor 1.5.1 Uso dei tasti di controllo Utilizzare il tasto di controllo sulla parte inferiore del monitor per regolare le impostazioni dell'immagine. 6 6 5 5 4 4 3 3 2 2 1 1. Indicatore alimentazione: • 2. La definizione del colore dell'indicatore di alimentazione è indicato nella tabella di seguito. Stato Descrizione Bianco ATTIVO Giallo Modalità standby SPENTO SPENTO Tasto di Alimentazione: • 3. Premere questo tasto per accendere/spegnere il monitor.
• Premere GamePlus per accedere al menu principale GamePlus. • Attiva la funzione Mirino, Timer o Contatore FPS, oppure Allineamento schermo. • Spostare il tasto ( ) verso l'alto/il basso per selezionare e premere ( ) per confermare la funzione desiderata. Premere il tasto per uscire e chiudere. • Mirino/Timer/Contatore FPS può essere spostato premendo il tasto a 5 direzioni.
2.1 Regolazione del monitor • Per una visione ottimale, si consiglia di guardare l’intero monitor, quindi regolare il monitor in base all’angolo di visione più comodo. • Afferrare il supporto per impedire che il monitor cada quando si cambia l'inclinazione. • L’angolazione del monitor può essere regolata da +23˚ e -5˚ ed è consentita una rotazione verso sinistra o destra di 62°. L’altezza del monitor può essere regolata di +/-15 cm.
2.2 Staccare il braccio/supporto (per montaggio su parete VESA) La base staccabile di questo monitor è progettata in modo particolare per il montaggio su parete VESA. Per rimuovere il braccio/supporto 2-2 1. Scollegare i cavi di alimentazione e del segnale. Posizionare il monitor con cautela con la parte anteriore verso il basso tenendolo all'interno della confezione in polistirolo espanso. 2. Rimuovere il cappucci delle viti. 3.
2.
3.1 Menu OSD (On-Screen Display) 3.1.1 Come effettuare la riconfigurazione GameVisual ASUS TUF Gaming VG24V Modalità gara DisplayPort 1920x1080@120Hz Modalità scenario Modalità gara Modalità cinema Modalità RTS/RPG Modalità FPS Modalità sRGB Modalità MOBA 1. Premere il tasto centrale a 5 vie per attivare il menu OSD. 2. Premere il tasto e per passare tra le opzioni del Menu. Quando ci si sposta da un'icona all'altra, è evidenziato il nome dell'opzione. 3.
3.1.2 1. Introduzione alle funzioni dell’OSD GameVisual Questa funzione dispone di sette funzioni secondarie che possono essere selezionate in base alle preferenze personali. Ogni modalità dispone di una funzione Ripristino che consente di mantenere l’impostazione o tornare alla modalità preimpostata.
2. Filtro luce blu Regola il livello di energia della luce blu emessa dalla retroilluminazione a LED. Filtro luce blu ASUS TUF Gaming VG24V Modalità gara DisplayPort 1920x1080@120Hz Livello 0 Livello 1 Livello 2 Livello 3 Livello 4 • Livello 0: Nessuna modifica. • Livello 1~4: Quanto più elevato è il livello, maggiore è la riduzione di luce blu. • Quando si attiva Filtro luce blu, vengono automaticamente importate le impostazioni predefinite di Modalità gara.
3. Colore Selezionare il colore di immagine preferito con questa funzione. Colore ASUS TUF Gaming VG24V Modalità gara DisplayPort 1920x1080@120Hz Luminosità Contrasto Saturazione Colore Tonalità pelle • Luminosità: La gamma di regolazione è tra 0 e 100. • Contrasto: La gamma di regolazione è tra 0 e 100. • Saturazione: La gamma di regolazione è tra 0 e 100. • Colore: Contiene tre modalità colore predefinite (Freddo, Normale, Caldo) ed una Modalità Utente.
4. Immagine Le funzioni Nitidezza, Trace Free, Controlli, VividPixel, ASCR, ELMB, Adaptive-Sync/FreeSync e Aumento Ombreggiatura ppossono essere regolate da questa funzione principale. Immagine ASUS TUF Gaming VG24V Modalità gara DisplayPort 1920x1080@120Hz Nitidezza Trace Free Controlli VividPixel ASCR ELMB Adaptive-Sync/FreeSync Aumento Ombreggiatura • Nitidezza: Regola la nitidezza dell'immagine. La gamma di regolazione è tra 0 e 100.
5. Selezione input Seleziona la sorgente di ingresso tra HDMI-1, HDMI-2 o DisplayPort. Selezione input ASUS TUF Gaming VG24V Modalità gara DisplayPort 1920x1080@120Hz HDMI-1 HDMI-2 DisplayPort 6. Imp Sistema Regola la configurazione del sistema.
7. • ECO Mode: Attiva la modalità eco per il risparmio energetico. • Impostazione OSD: Regola Tempo attesa OSD, DDC/CI e Trasparenza del menu OSD. • Lingua: Seleziona la lingua OSD. Le opzioni sono: Inglese, Francese, Tedesco, Spagnolo, Italiano, Olandese, Russo, Polacco, Ceco, Croato, Ungherese, Romeno, Portoghese, Turco, Cinese Semplificato, Cinese Tradizionale, Giapponese, Coreano, Persiano, Tailandese e Indonesiano. • Blocco tasti: Disabilita le funzioni di tutti i tasti.
3.2 Specifiche Modello Dimensioni schermo VG24VQ 23,6” W (59,94cm) Risoluzione max.
3.3 Risoluzione dei problemi (FAQ) Problema Possibile soluzione Il LED di alimentazione non è attivo • Premere il tasto per controllare se il monitor è in modalità ATTIVO. • Controllare che il cavo di alimentazione sia collegato correttamente al monitor e alla presa di rete. • Controllare la funzione Indicatore alimentazione nel menu principale OSD. Selezionare "ATTIVO" per attivare il LED d’alimentazione.
3.4 Elenco temporizzazioni supportate Elenco temporizzazioni PC per l’input HDMI1.4 / DP1.2 Risoluzione HDMI1(1.4) HDMI2(1.
Modalità IBM, Temporizzazioni predefinite (input HDMI / DP) Frequenza di Risoluzione aggiornamento 720x400 Frequenza orizzontale 70 Hz 31,469 kHz Modalità MAC, Temporizzazioni predefinite (input HDMI / DP) Risoluzione Frequenza di aggiornamento Frequenza orizzontale 640x480 67 Hz 35 kHz Modalità VESA, Temporizzazioni disponibili (input HDMI / DP) Risoluzione Frequenza di aggiornamento Frequenza orizzontale 1280 x 720 (RB) 1280x720 1440 x 900 (RB) 1680 x 1050 (RB) 1920x1080 60 Hz 60 Hz 60 Hz 6
3-12 Capitolo 3: Istruzioni generali