Serie VG24V Monitor LCD Guía del usuario
Tabla de contenido Avisos........................................................................................................... iii Información de seguridad........................................................................... iv Limpieza y mantenimiento.......................................................................... vi 1.1 ¡Bienvenido!.................................................................................. 1-1 1.2 Contenido del paquete..........................................
Avisos Declaración de la Comisión Federal de Comunicaciones (FCC, Federal Communications Commission) Este dispositivo cumple la Parte 15 de las Reglas de la FCC. Su funcionamiento está sujeto a dos condiciones: • Este dispositivo no puede causar interferencias perjudiciales, y • Este dispositivo debe aceptar cualquier interferencia recibida, incluida la interferencia que pueda causar un funcionamiento no deseado.
Información de seguridad iv • Antes de instalar el monitor, lea atentamente toda la documentación incluida en el paquete. • Para evitar incendios o descargas eléctricas, no exponga el monitor a la lluvia ni a la humedad. • No abra la carcasa del monitor. En el interior del mismo hay componentes con voltaje alto y peligroso que puede provocar graves daños personales. • Si la fuente de alimentación se avería, no intente arreglarla usted mismo.
• Si tiene problemas técnicos con el monitor, póngase en contacto con un profesional cualificado o con su distribuidor. • Proporcione una conexión a tierra antes de conectar el enchufe principal a la toma de corriente eléctrica. ADVERTENCIA El uso de otros auriculares o audífonos que no sean los especificados puede producir pérdida de audición debido a las presiones de sonido excesivas.
Limpieza y mantenimiento • Antes de levantar o reparar el monitor, debe desconectar los cables y el cable de alimentación. Siga las técnicas correctas para levantar el monitor cuando lo coloque. Cuando levante o transporte el monitor, agárrelo por los bordes. No levante la pantalla por la base ni el cable de alimentación. • Limpieza. Apague el monitor y desenchufe el cable de alimentación. Limpie la superficie del monitor con un paño sin pelusas y no abrasivo.
Dónde encontrar más información Consulte las siguientes fuentes para obtener información adicional y las actualizaciones del software. 1. Sitios Web de ASUS Los sitios Web de ASUS en todo el mundo proporcionan información actualizada del hardware y los productos de software de ASUS. Consulte el sitio Web http://www.asus.com 2. Documentación opcional El paquete del producto puede incluir documentación opcional que puede haber agregado su distribuidor. Estos documentos no forman parte del paquete estándar.
1.1 ¡Bienvenido! ¡Gracias por adquirir el monitor LCD de ASUS®! Los monitores LCD panorámicos más modernos de ASUS proporcionan una visualización más nítida, clara y brillante, además de una gran cantidad de funciones que mejoran la experiencia de visualización. ¡Con estas funciones, disfrutará de la comodidad y la experiencia visual agradable que proporciona el monitor! 1.
1.3 Ensamblar el monitor Para ensamblar el monitor: • Mientras se monta el brazo y la base del monitor, es recomendable mantener el monitor dentro de su embalaje de poliestireno expandido (EPS, Expanded Polystyrene). 1. Alinee el orificio del tornillo del brazo con el tornillo integrado en la base. A continuación, inserte la base en el brazo. 2. Fije la base al brazo apretando el tornillo incluido. 2 1 3 • 1-2 Tamaño del tornillo de la base: M6 x 10mm.
1.4 Conectar los cables 1.4.1 Parte posterior del monitor LCD 6 DCIN 5 HDMI-1 HDMI-2 4 3 1. Puerto de salida de auriculares 2. DisplayPort 3. Puerto HDMI-2 4. Puerto HDMI-1 5. Puerto ENTRADA DE CC 6.
1.5 Presentación del monitor 1.5.1 Utilizar los botones de control Utilice los botones de control situados en la parte inferior del monitor para ajustar la configuración de la imagen. 6 6 5 5 4 4 3 3 2 2 1 1. Indicador de encendido: • 2. Estado Descripción Blanco ENCENDER Ámbar Modo de espera APAGAR APAGAR Botón de alimentación: • 3. Presione este botón para encender y apagar el monitor.
Para activar GamePlus: • Presione el botón GamePlus para entrar en el menú principal GamePlus. • Active la función Punto de mira, Temporizador, Contador de FPS o Alineación de pantallas. • Mueva el botón y presione ( para salir. • Punto de mira, Temporizador y Contador de FPS se pueden mover presionando el botón de 5 direcciones . GamePlus Menú principal ( ) hacia arriba o hacia abajo para seleccionar ) para confirmar la función necesaria.
2.1 Ajustar el monitor • Para conseguir la mejor visualización posible, es recomendable mirar a toda la superficie del monitor y, a continuación, ajustarlo con el ángulo que le resulte más cómodo. • Sujete la base para impedir que el monitor se caiga cuando cambie su ángulo. • Puede ajustar el ángulo del monitor entre +23˚ y -5˚, así como girarlo 62˚ hacia la izquierda o hacia la derecha. También puede ajustar la altura del monitor entre +/- 15cm.
2.2 Desmontar el brazo y la base (para el soporte para pared VESA) El brazo desmontable de este monitor LCD está especialmente diseñado para soportes para pared VESA. Para desmontar el brazo y la base 2-2 1. Desconecte los cables de alimentación y señal. Coloque el monitor boca abajo con cuidado sobre su embalaje de EPS. 2. Quite las tapas con tornillos. 3. Quite los cuatro (4) tornillos que sujetan el brazo a la parte posterior del monitor. 4. Desmonte el pedestal (brazo y base) del monitor.
2.
3.1 Menú en pantalla (OSD) 3.1.1 Cómo realizar la reconfiguración GameVisual ASUS TUF Gaming VG24V Modo Carrera DisplayPort 1920x1080@120Hz Modo Escenario Modo Carrera Modo Cine Modo RTS/RPG Modo FPS Modo sRGB Modo MOBA 1. Presione el botón central del botón de 5 direcciones para mostrar el menú OSD. 2. Presione los botones y para alternar entre las opciones de Menú. A medida que pase de un icono a otro, el nombre de opción se resaltará. 3.
3.1.2 1. Presentación de las funciones OSD GameVisual Esta función contiene siete funciones secundarias que puede seleccionar según sus preferencias. Cada modo tiene la opción Reiniciar que permite mantener la configuración o recuperar el modo preestablecido.
2. Filtro de luz azul Esta opción permite ajustar el nivel de energía de la luz azul emitida por la retroiluminación de LED. Filtro de luz azul ASUS TUF Gaming VG24V Modo Carrera DisplayPort 1920x1080@120Hz Nivel 0 Nivel 1 Nivel 2 Nivel 3 Nivel 4 • Nivel 0: Sin cambios. • Nivel 1~4: Cuanto mayor sea el nivel, mayor será la reducción de luz azul. • Cuando la opción Filtro de luz azul está activada, la configuración predeterminada del Modo Carreras se importará automáticamente.
3. Color Esta función permite seleccionar el color de la imagen que desea. Color ASUS TUF Gaming VG24V Modo Carrera DisplayPort 1920x1080@120Hz Brillo Contraste Saturación Temp del color Tono de piel • Brillo: El intervalo de ajuste está comprendido entre 0 y 100. • Contraste: El intervalo de ajuste está comprendido entre 0 y 100. • Saturación: El intervalo de ajuste está comprendido entre 0 y 100.
4. Imagen Desde esta función principal, puede ajustar las siguientes opciones de imagen: Nitidez, Trace Free, Controle de Aspecto, VividPixel, ASCR, ELMB, Adaptive-Sync/FreeSync y Realce de Sombras. Imagen ASUS TUF Gaming VG24V Modo Carrera DisplayPort 1920x1080@120Hz Nitidez Trace Free Controle de Aspecto VividPixel ASCR ELMB Adaptive-Sync/FreeSync Realce de Sombras • Nitidez: Permite ajustar la nitidez de la imagen. El intervalo de ajuste está comprendido entre 0 y 100.
5. Selección de entrada Seleccione la fuente de entrada entre las siguientes señales de entrada: HDMI-1, HDMI-2 o DisplayPort. Selección de entrada ASUS TUF Gaming VG24V Modo Carrera DisplayPort 1920x1080@120Hz HDMI-1 HDMI-2 DisplayPort 6. Config. Sistema Permite ajustar la configuración del sistema. Config. Sistema ASUS TUF Gaming VG24V Modo Carrera DisplayPort 1920x1080@120Hz GameVisual Demo Mode Volumen ECO Mode Config. OSD Idioma Bloqueo de teclas Información Indicador de encendido Config.
7. • Config. OSD: Permite ajustar las opciones Temporizador OSD, DDC/CI y Transparencia para la pantalla OSD. • Idioma: Permite seleccionar el idioma OSD. Las opciones disponibles son: Inglés, francés, alemán, español, italiano, holandés, ruso, polaco, checo, croata, húngaro, rumano, portugués, turco, chino simplificado, chino tradicional, japonés, coreano, persa, tailandés e indonesio. • Bloqueo de teclas: Permite deshabilitar todas las funciones de las teclas.
3.2 Especificaciones Modelo VG24VQ Tamaño del panel 23,6” AN (59,94cm) Resolución máxima 1920x1080 a 144 Hz Brillo (típ.) Relación de contraste intrínseco (típ.
3.3 Solucionar problemas (preguntas más frecuentes) Problema Solución posible El indicador LED de alimentación no se ENCIENDE • Presione el botón para comprobar si el monitor se encuentra en el modo ENCENDIDO. • Compruebe si el cable de alimentación está correctamente conectado al monitor y a la toma de corriente. • Compruebe la función Indicador de encendido en el menú principal OSD. Seleccione “ENCENDER” para iluminar el LED de alimentación.
3.4 Lista de frecuencias admitidas Lista de temporizaciones de entrada de PC HDMI1.4 / DP1.2 Resolución HDMI1(1.4) HDMI2(1.
Modos IBM, Temporización predefinida de fábrica (Entrada HDMI / DP) Resolución Tasa de actualización Frecuencia horizontal 720x400 70Hz 31,469kHz Modos MAC, Temporización predefinida de fábrica (Entrada HDMI / DP) Resolución Tasa de actualización Frecuencia horizontal 640x480 67Hz 35kHz Modos VESA, Temporización disponible del usuario (Entrada HDMI / DP) Resolución Tasa de actualización Frecuencia horizontal 1280 x 720 (RB) 1280x720 1440 x 900 (RB) 1680 x 1050 (RB) 1920x1080 60Hz 60Hz 60Hz 6
3-12 Capítulo 3: Instrucciones generales