User Guide
Table Of Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- 2.1 Assembling the monitor arm/base
- 2.2 Adjusting the monitor
- 2.3 Detaching the arm (for VESA wall mount)
- 2.4 Cable management
- 2.5 Connecting the cables
- 2.6 Turning on the monitor
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported timing list
1-3
Chapter 1: Product Introduction
• Displays the input selection bar when the monitor enters standby mode
or displays the “NO SIGNAL“ message.
5. Power button/power indicator:
• Turns the monitor on/off.
• The color definition of the power indicator is as the below table.
Status Description
White ON
Amber Standby mode/No signal
OFF OFF
1.3.2 Back view
1
7 6
2 4 53
1. Earphone jack. This port is only available when an HDMI/
DisplayPort cable is connected.
2. DisplayPort. This port is for connection for a DisplayPort compatible
device.
3. HDMI ports. These ports are for connection with an HDMI compatible
devices.
4. Service port. This port is for connection with USB ash drive to
update the rmware.
5. DCIN port. This port connects the power adapter.
6. Kensington lock slot.
7. Control buttons.