User Guide

2-2
Chapter 2: Setup
2.2 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
• Hold the stand to prevent the monitor from falling when you change its
angle.
• The recommended adjusting angle is -5˚ to 20˚.
-5°~+20°
20°
20°
0°
• It is normal that the monitor slightly shakes while you adjust the viewing angle.
2.3 Detaching the arm (for VESA wall mount)
The detachable arm/base of this monitor is specially designed for VESA
wall mount.
To detach the arm/base:
1. Have the front of the monitor face down on a table.
2. Remove the rubbers in the four screw holes. (Figure 1)
3. Remove the base. (Figure 2)
4. Use a screwdriver to remove the screw on the hinge (Figure 3), then
remove the hinge.
(Figure 1)
2
1
2
1
(Figure 2)
(Figure 3)