Monitor TUF Gaming Serie VG27AQL3A Guida all’uso
Prima edizione Luglio 2023 Copyright © 2023 ASUSTeK COMPUTER INC. Tutti i diritti riservati. Nessuna parte di questo manuale, compresi i prodotti e il software in esso descritti, può essere riprodotta, trasmessa, trascritta, salvata in un sistema di archiviazione o tradotta in altra lingua in qualsiasi forma o con qualsiasi mezzo, ad eccezione dei documenti conservati da parte dell'acquirente per il backup, senza l'espresso consenso scritto di ASUSTeK COMPUTER INC. (“ASUS”).
Contenuti Avvisi .......................................................................................................... iv Informazioni sulla sicurezza........................................................................ v Cura e pulizia............................................................................................... vi Takeback Services......................................................................................
Avvisi Dichiarazione FCC (Federal Communications Commission) Questo prodotto è conforme alla Parte 15 delle Norme FCC. Il funzionamento è soggetto alle seguenti due condizioni: • Questo dispositivo non può provocare interferenze dannose. • Deve accettare tutte le interferenze ricevute incluse le interferenze che possono provocare funzionamenti indesiderati.
Informazioni sulla sicurezza • Prima di installare il monitor, leggere attentamente tutta la documentazione fornita in dotazione. • Per prevenire il rischio di incendi o elettrocuzioni, non esporre il monitor a pioggia o umidità. • Non tentare mai di aprire la struttura esterna del monitor. L’alta tensione all’interno del monitor è pericolosa e può provocare gravi lesioni fisiche. • Se l’alimentatore si rompe, non tentare di ripararlo da sé. Contattare un tecnico specializzato, oppure il rivenditore.
• L'adattatore e/o il cavo di alimentazione in dotazione sono progettati per l'uso esclusivo con il prodotto. Non utilizzare con altri prodotti. Questo simbolo indica che il prodotto (elettrico, elettronico, o che contiene batterie al mercurio) non deve essere smaltito insieme ai rifiuti urbani. Controllare le normative locali riguardo allo smaltimento dei prodotti elettronici.
Convenzioni usate in questa guida AVVISO: Informazioni che aiutano a prevenire lesioni alla persona che cerca di portare a termine una attività. ATTENZIONE: Informazioni che aiutano a prevenire danni ai componenti quando si cerca di portare a termine una attività. IMPORTANTE: Informazioni che DEVONO essere seguite per completare un’operazione. NOTA: Suggerimenti ed altre informazioni utili per portare a termine una operazione.
viii
1.1 Benvenuti! Congratulazioni per l'acquisto del monitor LCD ASUS®! L’ultimissimo monitor LCD widescreen da ASUS offre una visualizzazione più ampia, brillante e luminosa, nonché diverse funzioni per ottimizzare la visualizzazione. Con queste funzioni ci si godrà il comfort e la piacevole esperienza visiva fornita dal monitor! 1.
1.3 Introduzione al monitor 1.3.1 Veduta frontale 1 2 3 4 5 1. Tasto (a 5 direzioni ): • Attiva il menu OSD. Abilita le voci selezionate del menu OSD. • Aumenta/diminuisce i valori o sposta la selezione in alto, in basso, a destra e a sinistra. • Visualizza il menu di selezione dell’ingresso quando il monitor entra in modalità standby o visualizza il messaggio “NESSUN SEGNALE“. 2.
5. Tasto alimentazione/Indicatore alimentazione • Accende/spegne il monitor. • La definizione dei colori dell’indicatore d’alimentazione è descritta nella tabella che segue. 1.3.2 Stato Descrizione Bianco Ambra SPENTO ACCESO Modalità di standby/Nessun segnale SPENTO Veduta posteriore 10 9 1. Porta HDMI 1. Questa porta è per il collegamento con un dispositivo compatibile HDMI. 2. Porta HDMI 2. Questa porta è per il collegamento con un dispositivo compatibile HDMI. 3. DisplayPort.
1-4 Capitolo 1: Introduzione al prodotto
2.1 Installazione del supporto/base del monitor Per assemblare la base del monitor: 1. Appoggiare il monitor a faccia in giù su un tavolo. 2. Posizionare la cerniera del supporto nell'alloggiamento sul retro del monitor (solo per alcuni modelli). 3. Attaccare la base al supporto, assicurandosi che la linguetta del supporto si adatti nella scanalatura della base. 4. Fissare la base sul supporto usando le viti fornite in dotazione.
2.2 Regolazione del monitor • Per ottenere una visione ottimale, si raccomanda di guardare direttamente il monitor e poi di regolarlo sull’angolazione più comoda. • Afferrare il piedistallo per impedire che il monitor cada quando si cambia l’inclinazione. • L’angolo di regolazione consigliato è da +20˚ a -5˚ (per l’inclinazione)/da +20˚ a -20˚ (per la rotazione)/+130 mm (per la regolazione dell’altezza)/90˚ (per la vista orizzontale).
2.3 Rimozione del supporto (per l'installazione su parete VESA) Il supporto/base staccabile di questo monitor è progettato in modo particolare per l'installazione su parete VESA. Per staccare il supporto/base: 1. Appoggiare il monitor a faccia in giù su un tavolo. 2. Rimuovere i gommini dai quattro fori per le viti. (Immagine 1) 3. Rimuovere la base (Immagine 2). 4. Usare un cacciavite per rimuovere la vite sulla cerniera (Immagine 3) e rimuovere la cerniera.
2.4 Gestione dei cavi È possibile organizzare i cavi utilizzando lo slot di gestione dei cavi. Rimuovere il coperchio prima di far passare i cavi attraverso lo slot, quindi riposizionare il coperchio. 1 2.5 2 Collegamento dei cavi Collegare i cavi attenendosi alle seguenti istruzioni: • Per collegare il cavo d’alimentazione: inserire saldamente una estremità del cavo elettrico nella presa di ingresso CA del monitor, l'altra estremità ad una presa elettrica.
• Per usare le porte USB 3.2 Gen 1: Prendere il cavo USB e collegare l’estremità più piccola (tipo B) del cavo USB upstream alla porta USB upstream del monitor e l’estremità più grande (tipo A) alla porta USB del computer. Assicurarsi che sul computer sia installato il sistema operativo Windows 10/ Windows 11. Saranno attivate le porte USB sul monitor. Quando questi cavi sono collegati, si può scegliere il segnale voluto usando la voce Selezione input del menu OSD.
2-6 Capitolo 2: Installazione
3.1 Menu OSD (On-Screen Display) 3.1.1 Come riconfigurare ASUS TUF GAMING 2560x1440 180Hz VG27AQL3A Gioco Immagine Colore GameVisual Modalità gara Selezione input DisplayPort HDR DISATTIVA OD Variabile Variable Refresh Rate ELMB/ELMB SYNC GamePlus GameVisual Shadow Boost Selezione input MyFavorite Back 50 Enter EXIT 1. Premere il tasto ( ) per attivare il menu OSD. 2. Spostare il tasto ( ) verso l’alto/il basso per scorrere le funzioni.
3.1.2 1. Introduzione alle funzioni OSD Gioco ASUS TUF GAMING VG27AQL3A Gioco Immagine Colore 2560x1440 180Hz GameVisual Modalità gara Selezione input DisplayPort HDR DISATTIVA OD Variabile Variable Refresh Rate ELMB/ELMB SYNC GamePlus GameVisual Shadow Boost Selezione input MyFavorite 50 • Back Enter EXIT OD Variabile: migliora il tempo di risposta del livello di grigio del pannello LCD. L’intervallo di regolazione è da Livello 0 a Livello 5.
• • GamePlus: La funzione GamePlus offre una serie di strumenti e crea un ambiente di gioco migliore per gli utenti durante l’uso di diversi tipi di giochi. * Contatore FPS: Il conteggio FPS (fotogrammi per secondo) consente di sapere quanto è fluida la riproduzione del gioco. * Mirino: Le 6 opzioni disponibili per il mirino consentono di scegliere quello che meglio si adatta al gioco che si sta utilizzando.
• • In Modalità gara, non è possibile configurare le seguenti funzioni: Saturazione, ASCR. • In Modalità sRGB, non è possibile configurare le seguenti funzioni: Luminosità, Contrasto, Saturazione, Colore, ASCR. • In MOBA Mode, non è possibile configurare le seguenti funzioni: Saturazione, ASCR. Shadow Boost: Regola il Miglioramento dei colori scuri della curva della gamma del monito per arricchire i toni scuri in un’immagine rendendo le scene scure e gli oggetti più facili da vedere.
Durante il rilevamento dei contenuti HDR, viene visualizzato il messaggio "HDR AT". Durante la visualizzazione di contenuti HDR, le seguenti funzioni non sono disponibili: ELMB, GameVisual, Shadow Boost, Luminosità, Contrasto, ASCR, Filtro luce blu, Colore, Saturazione, Riduzione dinamica luminosità (impostato su ON) e Cecchino. • Riduzione dinamica luminosità: sincronizza con i contenuti con il cambio di contrasto per eseguire l'oscuramento dinamico della retroilluminazione.
3. Colore Impostare l’impostazione colore voluta usando questo menu. ASUS TUF GAMING VG27AQL3A Gioco 2560x1440 180Hz GameVisual Modalità gara Selezione input DisplayPort HDR DISATTIVA Colore Saturazione 50 Immagine Colore Selezione input MyFavorite Back 50 4. Enter EXIT • Colore: contiene 4 modalità tra cui Freddo, Normale, Caldo e Modalità Utente. • Saturazione: l’intervallo di regolazione è da 0 a 100.
5. MyFavorite ASUS TUF GAMING VG27AQL3A 2560x1440 180Hz GameVisual Modalità gara Selezione input DisplayPort HDR DISATTIVA Collegamento Gioco Imp personalizzate Immagine Colore Selezione input MyFavorite Back 50 • Enter EXIT Collegamento: * Collegamento 1/Collegamento 2: imposta le funzioni di collegamento per i tasti di collegamento. Quando si seleziona o attiva una funzione, il tasto di collegamento potrebbe non essere supportato.
• Audio: impostare le impostazioni relative all’audio da questo menu. * Volume: l’intervallo di regolazione è da 0 a 100. * No audio: attiva e disattiva l’audio del monitor. • Impostazione USB: attiva/disattiva la funzione USB Hub durante la modalità standby. • Indicatore alimentazione: accende/spegne l’indicatore LED d’alimentazione. • Blocco tasto accensione: consente di attivare o disattivare il tasto di accensione. • Blocco tasti: per disattivare tutti i tasti funzione.
3.2 Sommario delle specifiche Tipo di pannello Dimensioni del pannello Risoluzione massima Dimensioni pixel Luminosità (tipico) Rapporto di contrasto (tipico) Rapporto di contrasto (massimo) Angolo di visuale (orizzontale/ verticale) CR>10 Colori dello schermo Tempo di reazione Selezione della temperatura colore Ingresso analogico Ingresso digitale Jack auricolare Ingresso audio Altoparlante (integrato) Porta USB 3.
Lingue Accessori Conformità e standard 22 lingue (Inglese, Francese, Tedesco, Italiano, Spagnolo, Olandese, Portoghese, Russo, Ceco, Croato, Polacco, Rumeno, Ungherese, Turco, Cinese semplificato, Cinese tradizionale, Giapponese, Coreano, Tailandese, Indonesiano, Persiano, Ucraino) Guida rapida, scheda garanzia, cavo di alimentazione, cavo DisplayPort (opzionale), cavo HDMI (opzionale), cavo USB (opzionale), cacciavite a L (opzionale), 4 viti, 4 gommini cTUVus, FCC, CB, CE, ErP, WEEE, EU Energy label, Uk
Dimensioni esterne 3.3 Pivot : +/- 90 Degree 90 20 5 20 Swivel : +/- 20 Degree 20 50.46 [1.987] M4*4-Depth 10mm 117 [4.606] 100 [3.937] 117 [4.606] Wall Mount Keep Out Area 3-11 Monitor ASUS TUF Gaming serie VG27AQL3A 100 [3.937] 167.36 [6.589] 614.84 [24.206] 298.37 [11.747] 54.75 [2.155] 130 [5.118] 357.8 [14.087] 404.22 [15.914] 596.74 (Active-Area) [23.494] AA Center 531.22 [20.914] 167.84 [6.608] 335.67 [13.215] 533.88 [21.019] 19.81 [0.78] 187.18 [7.369] 215.14 [8.
3.4 Risoluzione dei problemi (FAQ) Problema Possibile soluzione Il LED di alimentazione non è acceso • Premere il tasto per verificare se il monitor in modalità accensione. • Controllare che il cavo d'alimentazione sia collegato al monitor ed alla presa di corrente. Il LED d’alimentazione si illumina di • Controllare che il monitor ed il computer siano colore ambra e non ci sono immagini ACCESI. su schermo • Assicurarsi che il cavo segnale sia collegato in modo appropriato al monitor ed al computer.
3.
Timing video Frequenza della risoluzione 3-14 HDMI DP Frequenza aggiornamento Frequenza aggiornamento 720 x 480P 59,94Hz 59,94Hz 720 x 480P 60Hz 60Hz 720 x 576P - 50Hz 1280 x 720P - 50Hz 1280 x 720P 59,94Hz 59,94Hz 1280 x 720P 60Hz 60Hz 1440 x 480P - - 1440 x 576P - 50Hz 1920 x 1080P - - 1920 x 1080P 50Hz 50Hz 1920 x 1080P 59,94Hz 59,94Hz 1920 x 1080P 60Hz 60Hz 1920 x 1080P 120Hz 120Hz 1920 x 1080P 100Hz 100Hz 640 x 480P 60Hz 60Hz Capitolo 3: Istruzioni gen