使用手冊 Motherboard TUF GAMING Z790-PLUS WIFI
T21279 第一版 2022 年 11 月發行 版權說明 © ASUSTeK Computer Inc. All rights reserved.
目錄 安全性須知............................................................................................................................................... iv 關於這本使用手冊................................................................................................................................. vi TUF GAMING Z790-PLUS WIFI 規格列表................................................................................... ix 產品包裝...............................................................................................
安全性須知 電氣方面的安全性 • 為避免可能的電擊造成嚴重損害,在搬動電腦主機之前,請先將電腦電源線暫 時從電源插槽中拔掉。 • 當您要加入硬體裝置到系統中時,請務必先連接該裝置的訊號線,然後再連接 電源線。可能的話,在安裝硬體裝置之前先拔掉電腦的電源供應器電源線。 • 當您要從主機板連接或拔除任何的訊號線之前,請確定所有的電源線已事先拔 掉。 • 在使用介面卡或擴充卡之前,我們建議您可以先尋求專業人士的協助。這些裝 置有可能會干擾接地的迴路。 • 請確定電源供應器的電壓設定已調整到本國/本區域所使用的電壓標準值。若您 不確定您所屬區域的供應電壓值為何,請就近詢問當地的電力公司人員。 • 如果電源供應器已損壞,請不要嘗試自行修復。請將之交給專業技術服務人員 或經銷商來處理。 操作方面的安全性 • 在您安裝主機板以及加入硬體裝置之前,請務必詳加閱讀本手冊所提供的相關 資訊。 • 在使用產品之前,請確定所有的排線、電源線都已正確地連接好。若您發現有 任何重大的瑕疵,請儘速聯絡您的經銷商。 • 為避免發生電氣短路情形,請務必將所有沒用到的螺絲、迴紋針及其他零件收 好,不要遺留在主機
限用物質名稱及含量列表 限用物質及其化學符號 單元 六價鉻 多溴聯苯 多溴二苯醚 (PBB) (PBDE) (Cr+6) 鉛 (Pb) 汞 (Hg) 鎘 (Cd) 印刷電路板 ─ ○ ○ ○ ○ ○ 電子組件 ─ ○ ○ ○ ○ ○ 連接器 ─ ○ ○ ○ ○ ○ 其他及其配件 ─ ○ ○ ○ ○ ○ 備考 1. "○" 係指該項限用物質之百分比含量未超出百分比含量基準值。 備考 2.
HDMI Trademark Notice The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
提示符號 為了能夠確保您正確地完成主機板設定,請務必注意下面這些會在本手冊中出現 的標示符號所代表的特殊含意。 小心: 提 醒您在進行某一項工作時要注意勿傷害到電腦主機板元件與注 意您自身的安全。 重要: 此 符號表示您必須要遵照手冊所描述之方式完成一項或多項軟硬 體的安裝或設定。 注意: 提供有助於完成某項工作的訣竅和其他額外的資訊。 請注意! 本產品享有三年產品保固期,倘若自行撕毀或更換原廠保固序號標籤,即取消保 固權益,且不予提供維修服務。 vii
華碩的連絡資訊 華碩電腦股份有限公司 ASUSTeK COMPUTER INC. 地址:112 台北市北投區立德路 15 號 1 樓 ASUS COMPUTER INTERNATIONAL(美國) 地址:48720 Kato Rd., Fremont, CA 94538, USA ASUS COMPUTER GmbH(德國/奧地利) 地址:Harkortstrasse 21-23, 40880 Ratingen, Germany ASUSTeK (UK) LIMITED 地址: 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL, England, United Kingdom 服務與支援 請造訪 https://www.asus.
TUF GAMING Z790-PLUS WIFI 規格列表 支援採用 LGA1700 插槽的第 13 代 Intel® Core™ 與第 12 代 Intel® Core™、Pentium® Gold 及 Celeron® 處理器* 中央處理器 支援 Intel® Turbo Boost 2.0 技術與 Intel® Turbo Boost Max 3.0 技術** * 請瀏覽華碩網站 https://www.asus.com/tw/ 獲得最新的處理器支援列表。 ** 是否支援 Intel® Turbo Boost Max 3.
TUF GAMING Z790-PLUS WIFI 規格列表 網路功能 1 x Intel® 2.5Gb 網路 TUF LANGuard Wi-Fi 6E 2x2 Wi-Fi 6E(802.11 a/b/g/n/ac/ax) 無線與藍牙 支援 2.4/5/6GHz 三頻段* Bluetooth® v5.3** * WiFi 6E 6GHz 法規可能因國家/地區而異。 ** 藍牙版本可能會有所不同,欲了解最新規格,請參閱 Wi-Fi 模組製造商的網 站。 後側面板 USB 連接埠(共 8 埠) 1 x USB 3.2 Gen 2x2 連接埠(1 x USB Type-C®) 3 x USB 3.2 Gen 2 連接埠(2 x Type-A + 1 x USB Type-C®) USB 4 x USB 3.2 Gen 1 連接埠(4 x Type-A) 前側面板 USB 連接埠(共 7 埠) 1 x USB 3.2 Gen 2 接頭(支援 USB Type-C®) 1 x USB 3.2 Gen 1 接頭,可擴充 2 組外接式 USB 3.2 Gen 1 連接埠 2 x USB 2.
TUF GAMING Z790-PLUS WIFI 規格列表 風扇與散熱相關 1 x 4-pin 中央處理器風扇接頭 1 x 4-pin 中央處理器選用風扇接頭 1 x 4-pin AIO Pump 接頭 4 x 4-pin 機殼風扇接頭 電源相關 1 x 24-pin 主電源插槽 2 x 8-pin +12V 電源插槽 儲存相關 4 x M.2 插槽(Key M) 4 x SATA 6Gb/s 連接埠 內部 I/O 裝置連接埠 USB 1 x USB 3.2 Gen 2 接頭(支援 USB Type-C®) 1 x USB 3.2 Gen 1 接頭,可擴充 2 組外接式 USB 3.2 Gen 1 連接埠 2 x USB 2.0 接頭,可擴充 4 組外接式 USB 2.
TUF GAMING Z790-PLUS WIFI 規格列表 華碩 EZ DIY - CPU 插槽拉桿保護套 - ProCool 特殊功能 - 一體式 I/O 擋板 - SafeDIMM Aura Sync - Aura RGB 燈條接頭 - 可定址 Gen 2 燈條接頭 華碩獨家軟體 Armoury Crate - Aura Creator - Aura Sync - Fan Xpert 4 (支援 AI Cooling II) - 雙向 AI 降噪 - Power Saving AI Suite 3 - TurboV EVO - DIGI+ VRM 軟體功能 - PC Cleaner TUF GAMING CPU-Z DTS 音效處理 MyASUS Norton 360 for Gamers(60 天免費試用) WinRAR UEFI BIOS 華碩 EZ DIY - 華碩 CrashFree BIOS 3 - 華碩 EZ Flash 3 - 華碩 UEFI BIOS EZ Mode BIOS 192 (128+64) Mb Flash ROM、UEFI AMI BIOS 管理功能 WOL
• 規格若有變動,恕不另行通知。最新規格請參考華碩網站。 • MyASUS 提供全方位的產品服務,幫助使用者解決產品問題,優化產 品使用效能,重組 ASUS 軟體,保持乾淨的桌面以及更寬廣的儲存空 間。請掃描 QR Code 獲得安裝指南與常見問題解答。 • 關於為主機板下載與安裝驅動程式和工具程式的更多資訊,請掃描下 方 QR code: xiii
產品包裝 在您拿到本主機板包裝盒之後,請馬上檢查下面所列出的各項標準配件是否齊全。 主機板 1 x TUF GAMING Z790-PLUS WIFI 主機板 排線 2 x SATA 6Gb/s 排線 1 x 華碩 Wi-Fi 行動天線 其他 1 x TUF GAMING 貼紙 2 x M.2 橡膠軟墊包 1 x M.
產品介紹 1.
1.2 主機板結構圖 5 4 1 4 2 4 18 24.4cm(9.6in) CPU_OPT 12 6 2242 M.2_1(SOCKET3) PCIE 4.0 X4 2260 SATA IRST X V SATA6G_2 SATA6G_1 PCIEX16(G5) PCIEX1(G3)_1 Intel® Z790 PCIEX4(G4) 2242 Super I/O 2280 2260 2242 Audio Codec M.2_2(SOCKET3) PCIE 4.0 X4 SATA IRST X V M.2_3(SOCKET3) PCIE 4.0 X4 7 6 M.2_4(SOCKET3) 2260 2280 M.2_3(SOCKET3) PCIEX1(G3)_2 M.2_2(SOCKET3) BATTERY 3 ADD_GEN 2_1 9 1st 22110 2280 8 30.5cm(12in) M.
頁數 1-4 2. 記憶體插槽 1-5 3. 擴充插槽 1-7 4. 風扇與泵接頭 1-9 5. 主機板電源插槽 1-10 6. M.2 插槽 1-11 7. SATA 6Gb/s 連接埠 1-12 8. USB 3.2 Gen 2 Type-C® 前面板接頭 1-13 9. USB 3.2 Gen 1 接頭 1-13 10. USB 2.0 接頭 1-14 11. 可定址 Gen 2 燈條接頭 1-15 12. Aura RGB 燈條接頭 1-16 13. CMOS 組態資料清除排針 1-17 14. 序列埠排針 1-18 15. 前面板音效連接排針 1-19 16. 系統控制面板連接排針 1-20 17. Thunderbolt™ (USB4®) 連接排針 1-21 18. Q-LED 指示燈 1-22 華碩 TUF GAMING Z790-PLUS WIFI 主機板使用手冊 第一章 主機板元件說明 1.
1.
2.
記憶體設定 您可以任意選擇使用 8GB、16GB 與 32GB Non-ECC Un-buffered DDR5 記憶體模 組至本主機板的記憶體插槽上。 第一章 您可以在通道 A、通道 B 安裝不同容量的記憶體模組。在雙通道設定中, 系統會偵測較低容量通道的記憶體容量。任何在較高容量通道的其他記憶 體容量,會被偵測為單通道模式執行。 • 預設的記憶體運作頻率是依據其 SPD(Serial Presence Detect)。在 預設狀態下,某些記憶體在超頻時的運作頻率可能會較供應商所標示 的數值為低。 • 在全負載或超頻設定下,記憶體可能需要更佳的冷卻系統以維持運作 的穩定。 • 請安裝相同 CAS Latency 的記憶體模組。為求最佳相容性,建議您安 裝同廠牌、相同資料碼(D/C)版本的記憶體模組。請先與供應商確認 並購買正確的記憶體模組。 • 請造訪華碩網站 https://www.asus.
3.
請參考下表了解建議的顯示卡設定與 Hyper M.2 設定。 顯示卡建議設定 插槽說明 第一章 單張顯示卡 兩張顯示卡 1 PCIEX16(G5) x16 x16 5 PCIEX16(G4) - x4 當您安裝多張顯示卡時,建議您將機殼風扇的排線連接至機殼風扇接頭, 以獲得更良好的散熱環境。 PCIe x16 插槽的 PCIe 通道拆分與 M.2 設定(來源於處理器) 可識別的 M.2 固態硬碟數量(個) 插槽說明 1 * PCIEX16(G5) 情況 1 情況 2 1(x16)* 2(x8+x8)** 將一張 M.2 SSD 卡安裝至 Hyper M.2 X16 系列卡的 M.2_1 或 M.2_3 插槽 。 ** 將兩張 M.2 SSD 卡安裝至 Hyper M.2 X16 系列卡的 M.2_1 及 M.2_3 插槽。 • 當安裝 Hyper M.2 x16 系列卡時,亦支援 RAID 功能的額外 PCIe 通 道拆分與 M.2 設定。 • PCIe 通道拆分列表請參考 https://www.asus.
4.
5.
6. M.2 插槽 這個插槽用來安裝 M.2 裝置,如 M.2 固態硬碟。 M.2_1(SOCKET3) C M.2_4(SOCKET3) B M.2_2(SOCKET3) D M.2_3(SOCKET3) 第一章 A A B D C • Intel® 第 13 代與第 12 代處理器: -M .2_1 插槽支援 PCIe 4.0 x4 模式 M Key 的 2242/2260/2280/22110 類型儲存裝置。 • Intel® Z790 晶片組: -M .2_2 插槽支援 PCIe 4.0 x4 模式 M Key 的 2242/2260/2280 類型 儲存裝置。 - M.2_3 插槽支援 PCIe 4.0 x4 模式 M Key 的 2242/2260/2280/22110 類型儲存裝置。 - M.2_4 插槽支援 PCIe 4.
7.
8. USB 3.2 Gen 2 Type-C® 前面板接頭 第一章 這個接頭用來連接 USB 3.2 Gen 2 Type-C® 模組,可在前面板擴充 USB 3.2 Gen 2 Type-C® 連接埠。USB 3.2 Gen 2 Type-C® 的資料傳輸率最高可達 10Gb/s。 U32G2_C9 NC NC CC1 VBUS RX1RX1+ GND TX1TX1+ VBUS VBUS TX2+ TX2GND RX2+ RX2GND DD+ CC2 USB 3.2 Gen 2 Type-C® 模組為選購配備,請另行購買。 9. USB 3.2 Gen 1 接頭 這個接頭用來連接 USB 3.2 Gen 1 模組,可擴充外接式 USB 3.2 Gen 1 連接 埠。USB 3.
10. USB 2.0 接頭 A USB_1011 USB+5V USB_P12USB_P12+ GND NC PIN 1 USB+5V USB_P11USB_P11+ GND 第一章 USB+5V USB_P10USB_P10+ GND NC 這些接頭用來連接 USB 2.0 模組,可擴充外接式 USB 2.0 連接埠。USB 2.0 的資料傳輸率最高可達 480Mb/s。 USB_1213 PIN 1 USB+5V USB_P13USB_P13+ GND B A B 請勿將 1394 排線連接到 USB 接頭上。這麼做可能會導致主機板的損毀! USB 2.
11.
12.
13. CMOS 組態資料清除排針 第一章 這個排針可讓您清除 CMOS 中的即時時鐘(RTC)隨機存取記憶體,其中 包含日期、時間、系統密碼與系統設定參數。 CLRTC +3V_BAT GND PIN 1 想要清除這些資料,可以依照下列步驟進行: 1. 關閉電腦電源,拔掉電源線。 2. 用金屬物或跳線帽將 [1-2] 針腳短路約五∼十秒鐘。 3. 插上電源線,開啟電腦電源。 4.
14.
15.
16.
17.
18.
第二章: 硬體裝置資訊 硬體裝置資訊 2.1 建立您的電腦系統 2 本章節的圖示僅供參考。主機板的構造可能會隨著型號而有所不同,但是 安裝的步驟仍然是相同的。 2.1.
第二章 在將槓桿閂鎖鎖定在固定 卡舌下之前,請確認移除 槓桿閂鎖上的軟保護管, 否則可能會在安裝冷卻系 統時損壞您的系統。 2-2 第二章:硬體裝置資訊
2.1.
• 我們建議您在將冷卻系統 安裝至 Intel® 700 及 600 系列主機板時使用相容於 LGA1700 的冷卻系統。 主機板背面 • 華碩的 Intel® 700 及 600 系列主機板上也有一個用 LGA1200 相容冷卻系統的 額外孔,但是我們仍強烈建 議您諮詢您的冷卻系統供應 商或製造商,以了解冷卻系 統的相容性與功能。 LGA1200 • 本主機板無法安裝 Push-Pin 類型的 LGA1200 相容之散 熱系統。 LGA1700 第二章 在按這些 push-pin 時,請確認 您聽到了咔嗒聲。 2-4 第二章:硬體裝置資訊
安裝 AIO 冷卻器 • 我們建議您在將冷卻系統安裝至 Intel® 700 及 600 系列主機板時使 用相容於 LGA1700 的冷卻系統。 • 華碩的 Intel® 700 及 600 系列主機板上也有一個用 LGA1200 相容冷 卻系統的額外孔,但是我們仍強烈建議您諮詢您的冷卻系統供應商或 製造商,以了解冷卻系統的相容性與功能。 第二章 • 想要安裝 AIO 冷卻器時,建議您先將主機板安裝到機殼後再安裝 AIO 冷卻器。 CPU_FAN CPU_OPT 華碩 TUF GAMING Z790-PLUS WIFI 主機板使用手冊 AIO_PUMP 2-5
2.1.
2.1.4 安裝 M.2 儲存裝置 支援的 M.2 類型會依主機板而異。 若 M.2 散熱片上的導熱墊因損壞需要更換,我們建議您更換為 1.25mm 厚度的導熱墊。 • 圖示僅說明了單個 M.2 插槽的安裝步驟,若要安裝 M.2 儲存裝置至 其他 M.2 插槽,安裝步驟相同。 • 請使用十字螺絲起子來移除或安裝本章節提到的螺絲或螺柱。 • M.2 裝置為選購配備,請另行購買。 鬆開 M.2 散熱片上的螺絲。 2. 抬起並移除散熱片。 第二章 1.
3. 將 M.2 儲存裝置安裝至 M.2 插槽。安裝不同長度的 M.2 儲存裝置步驟可能略有 不同,請參考以下部分了解不同類型儲存裝置及它們的安裝步驟: • 安裝 M.2 至 M.2_1/M.2_3 插槽 2280/22110 長 A. (選擇性)若需要,移除預裝在 2280 長度螺絲孔的 M.2 Q-Latch 螺絲。 僅當您欲安裝 22110 類型儲存裝置至 M.2 插槽時,才需要執行步驟 A。 B. (選擇性)在安裝單面 M.2 儲存裝置前,請先確認使用產品隨附 的 M.2 橡膠墊。當您安裝雙面 M.2 儲存裝置時,不需要再安裝產 品隨附的 M.2 橡膠墊。原先已黏貼於卡上的橡膠墊即可適用於雙 面 M.2 儲存裝置。 C. 旋轉調整 M.2 Q-Latch,使其突起端朝向 M.2 插槽的相反方向。 第二章 D. 將 M.2 儲存裝置安裝至 M.2 插槽。 E. 將 M.2 Q-Latch 順時針旋轉,將 M.
2242/2260 長 A. (選擇性)移除 M.2 橡膠墊。 僅當您欲安裝 2242 類型儲存裝置至 M.2 插槽時,才需要執行此步驟。 B. (選擇性)若需要,移除預裝在 2280 長度螺絲孔的 M.2 Q-Latch 螺絲。 C. 將 M.2 Q-Latch 安裝至與欲安裝的儲存裝置長度相匹配的螺絲孔。 D. 旋轉調整 M.2 Q-Latch,使其突起端朝向 M.2 插槽的相反方向。 將 M.2 儲存裝置安裝至 M.2 插槽。 F. 將 M.2 Q-Latch 順時針旋轉,將 M.2 儲存裝置固定到位。 第二章 E.
• 安裝 M.2 至 M.2_2 插槽 2280 長 A. 旋轉調整 M.2 Q-Latch,使其突起端朝向 M.2 插槽的相反方向。 B. 將 M.2 儲存裝置安裝至 M.2 插槽。 C. 將 M.2 Q-Latch 順時針旋轉,將 M.2 儲存裝置固定到位。 第二章 2242/2260 長 A. 移除預裝在 2280 長度螺絲孔的 M.2 Q-Latch 螺絲。 B. 將 M.2 Q-Latch 安裝至與欲安裝的儲存裝置長度相匹配的螺絲孔。 C. 旋轉調整 M.2 Q-Latch,使其突起端朝向 M.2 插槽的相反方向。 2-10 D. 將 M.2 儲存裝置安裝至 M.2 插槽。 E. 將 M.2 Q-Latch 順時針旋轉,將 M.
• 安裝 M.2 至 M.2_4 插槽 2280 長 A. (選擇性)在安裝單面 M.2 儲存裝置前,請先確認使用產品隨附 的 M.2 橡膠墊。當您安裝雙面 M.2 儲存裝置時,不需要再安裝產 品隨附的 M.2 橡膠墊。原先已黏貼於卡上的橡膠墊即可適用於雙 面 M.2 儲存裝置。 B. 旋轉調整 M.2 Q-Latch,使其突起端朝向 M.2 插槽的相反方向。 C. 將 M.2 儲存裝置安裝至 M.2 插槽。 D. 將 M.2 Q-Latch 順時針旋轉,將 M.2 儲存裝置固定到位。 第二章 OPTIONAL 2242/2260 長 A. (選擇性)移除 M.2 橡膠墊。 僅當您欲安裝 2242 類型儲存裝置至 M.2 插槽時,才需要執行此步驟。 B. 依據您欲安裝的 M.2 儲存裝置的長度,將隨附的可移除螺柱安裝 至對應的螺絲孔。 C. 將 M.2 儲存裝置安裝至 M.2 插槽。 D. 將隨附的螺絲鎖於螺柱上,以固定您的 M.
4. 將散熱片底部散熱墊上的膠膜撕開。 第二章 若 M.2 散熱片上的導熱墊因損壞需要更換,我們建議您更換為 1.25mm 厚度的導熱墊。 5. 重新安裝散熱片。 6.
2.1.5 安裝主機板 將主機板放入機殼,並確認後側 I/O 連接埠對齊機殼的後側 I/O 面板。 2. 請將下圖所圈選出來的「九」個螺絲孔位對準主機機殼內相對位置的螺絲孔, 接著再一一鎖上螺絲固定主機板。 第二章 1.
2.1.
2.1.
2.1.8 安裝前面板輸出/輸入連接埠 安裝系統控制面板連接排針 安裝 USB 3.2 Gen 2 Type-C® 接頭 USB 3.2 Gen 2 Type-C® 第二章 本接頭僅能以一個方向插入。請 將插頭壓入接頭直到卡入定位。 安裝 USB 3.2 Gen 1 接頭 安裝 USB 2.0 接頭 USB 2.0 USB 3.
2.1.
安裝 Thunderbolt™ 系列卡 6-pin PCIe 電源插槽 USB Type-C® 連 接埠可連接到 Thunderbolt™ 裝置 MiniDP 輸入連 接埠可連接到 主機板或顯示 卡上的 DP 輸 出連接埠。 第二章 USB 2.
使用 PCIe Slot Q-Release PCIEX16 插槽具備一個 PCIe Slot Q-Release 按鈕,可讓您輕鬆移除安裝在此 PCIe 插槽中的擴充卡,即使擴充卡可能擋住 PCIe push-latch,例如顯示卡。 安裝擴充卡前: 當您將擴充卡安裝至該插槽前先按下 PCIe Slot Q-Release 按鈕,以確認 PCIe push-latch 在安裝前已完全按下。 使用 PCIe Slot Q-Release 以釋放擴充卡: 第二章 請先用一手輕輕提起擴充卡,再用另一手按下 PCIe Slot Q-Release 按鈕。如此一 來即可釋放擴充卡以便您可輕鬆地將其移除。 華碩 TUF GAMING Z790-PLUS WIFI 主機板使用手冊 2-19
2.1.
2.2 主機板後側與音效連接埠 2.2.1 後側面板連接埠 1 2 4 5 3 6 7 8 9 10 11 1. DisplayPort 連接埠 2. USB 3.2 Gen 1 Type-A 連接埠 E3 與 E4 3. Intel® 2.5Gb 網路連接埠* 4. HDMI® 連接埠 5. USB 3.2 Gen 2x2 Type-C® 連接埠 C1 6. USB 3.2 Gen 1 Type-A 連接埠 E1 與 E2 7. USB 3.2 Gen 2 Type-A 連接埠 3 與 4 8. USB 3.2 Gen 2 Type-C® 連接埠 C5 9. Wi-Fi 天線連接埠 10. 光纖 S/PDIF 數位音效連接埠 11. 音效連接埠** 第二章 後側面板連接埠 * 與 **:請參考下表中網路連接埠指示燈與音效連接埠的定義。 強烈建議您將裝置連接到對應傳輸速率的連接埠。如,將 USB 3.2 Gen 1 裝置連接至 USB 3.
* Intel® 2.5Gb 網路連接埠指示燈說明 ACT/LINK 指示燈 速度指示燈 ACT/LINK 指示燈 狀態 說明 狀態 說明 關閉 沒有連線 關閉 沒有連線 綠色 已連線 關閉 閃爍 資料傳輸中 連線速度 100Mbps / 10Mbps 綠色 連線速度 2.5Gbps 橘色 連線速度 1Gbps 速度 指示燈 網路連接埠 ** 2、4、5.1 或 7.1 聲道音效設定 第二章 連接埠 2 聲道 4 聲道 5.1 聲道 7.
2.2.
連接 5.1 聲道喇叭 第二章 連接 7.
2.3 第一次啟動電腦 1. 確認所有排線與接腳都接妥,然後蓋上機殼的外蓋。 2. 確定所有的開關都已關閉。 3. 將電源線接上機殼背面的電源輸入插座。 4. 情況許可的話,最好將電源線路上加接突波吸收/保護器。 5. 您可以先開啟以下周邊的電源: a. 顯示器 b. 外接式周邊裝置(從串連的最後端開始) c. 系統電源 送電之後,機殼面板上應該會有電源指示燈亮起才對。如果是使用 ATX 電源的 話,必須等到面板按鈕被觸碰後才會啟動電源,電源指示燈此時才會亮起。如果 您的電腦符合綠色省電標準,已隨時準備可以進入省電模式的話,顯示器指示燈 也會亮起。 第二章 6. 系統將進行開機自我測試(POST)。如果啟動過程一切順利的話,不久就可以 在顯示器上看到畫面了,如果送電之後超過 30 秒而畫面未有動靜的話,表示電 腦的設定尚有問題存在。請再進一步地的檢查各項動作,如果還是不行,就需要 向廠商求助了! 嗶聲 說明 一短嗶聲 已偵測到顯示卡 Quick boot 設為 disabled 未偵測到鍵盤 一連續嗶聲後跟隨兩短嗶聲,暫停一 未偵測到記憶體 下然後重複 7. 2.
第二章 2-26 第二章:硬體裝置資訊
第三章: BIOS 程式設定與 RAID 支援 BIOS 程式設定與 RAID 支援 3 有關 BIOS 與 RAID 設定的更多詳細資訊,請參閱 https://www.asus.com/ tw/support/。 3.
3.
3.3 華碩 EZ Flash 3 華碩 EZ Flash 3 程式讓您能輕鬆地更新 BIOS 程式,可以不必再到作業系統模 式下執行。 請讀取出廠預設值來保持系統的穩定。在 Exit 選單中選擇 Load Optimized Defaults 項目或按下 快速鍵來回復 BIOS 預設設定。 請依照以下步驟更新 BIOS 程式: • 本功能僅支援採用 FAT 32/16 格式的單一磁區 USB 隨身碟。 • 當進行 BIOS 更新時,請勿關閉或重新啟動系統以免造成系統開機失 敗! 將儲存有最新 BIOS 檔案的 USB 隨身碟插入 USB 連接埠。 2. 進入 BIOS 設定程式的 Advanced Mode,選擇 Tool > ASUS EZ Flash 3 Utility, 接著請按下 鍵。 3. 按左/右方向鍵切換到 Drive 區域。 4. 按上/下方向鍵找到儲存有最新 BIOS 檔案的 USB 隨身碟,然後按下 鍵。 5. 按左/右方向鍵切換到 Folder 區域。 6.
3.4 華碩 CrashFree BIOS 3 華碩最新自行研發的 CrashFree BIOS 3 工具程式,讓您在當 BIOS 程式與資料被 病毒入侵或損毀時,可以輕鬆地從含有最新或原始 BIOS 檔案的 USB 隨身碟中回復 BIOS 程式的資料。 回復 BIOS 程式: 1. 請至 https://www.asus.com/tw/support/ 下載適用於本主機板的最新 BIOS 版本。 2. 將 BIOS 檔案改名為 ASUS.CAP 或 TGZ790PW.CAP 並將重命名後的 BIOS 檔案 複製到 USB 隨身碟中。 3. 啟動系統。 4. 將儲存有最新 BIOS 檔案的 USB 隨身碟插入 USB 連接埠。 5. 接著工具程式便會自動檢查裝置中是否存有 BIOS 檔案。當搜尋到 BIOS 檔案 後,工具程式會開始讀取 BIOS 檔案並自動進入 EZ Flash 3 公用程式。 6.
3.5 RAID 功能設定 本主機板搭載 Intel® Rapid Storage Technology,支援 RAID 0、RAID 1、RAID 5 與 RAID 10 設定。 關於 RAID 陣列設定的更多詳細內容,請至 https:// www.asus.
第三章 3-6 第三章:BIOS 程式設定與 RAID 支援