Motherboard TUF X470-PLUS GAMING
E13882 First Edition V1 March 2018 Copyright © 2018 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Safety information........................................................................................................ v About this guide.......................................................................................................... vi TUF X470-PLUS GAMING specifications summary............................................... viii Package contents.......................................................................................................
3.3 My Favorites................................................................................................ 3-9 3.4 Main menu................................................................................................. 3-11 3.5 Ai Tweaker menu...................................................................................... 3-11 3.6 Advanced menu........................................................................................ 3-12 3.6.1 AMD fTPM Configuration.....................
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product Introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers, and connectors on the motherboard.
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task.
TUF X470-PLUS GAMING specifications summary CPU AM4 socket for AMD Ryzen™ 2nd Generation/ Ryzen™ with Radeon™ Vega Graphics/ Ryzen™ 1st Generation/ 7th Generation A-Series/ Athlon X4 Processors Supports CPU up to 8 cores* * Due to the CPU limitations, CPU cores supported vary by processor. ** Refer to www.asus.com for the AMD CPU support list. Chipset AMD X470 Chipset AMD Ryzen™ 2nd Generation/ Ryzen™ with Radeon™ Vega Graphics/ Ryzen™ 1st Generation Processors - 4 x DIMM, max. 64GB, DDR4 3200(O.C.
TUF X470-PLUS GAMING specifications summary LAN Realtek® 8111H Gigabit LAN Controller Realtek® ALC 887-VD2 8-channel* High Definition Audio CODEC - Exclusive DTS Custom for GAMING Headsets - Audio Shielding: Ensures precision analog/digital separation and greatly reduces multi-lateral interference Audio - Dedicated audio PCB layers: Separate layers for left and right channels to guard the quality of the sensitive audio signals - Premium Japanese audio capacitors: Provide warm, natural and immersive sound
TUF X470-PLUS GAMING specifications summary Easy PC DIY Safe motherboard mounting - Component-free areas to minimize damage risk ASUS Unique Features Q-Design - ASUS Q-Slot - ASUS Q-DIMM ASUS Exclusive Features - featuring a friendly graphics user interface - ASUS CrashFree BIOS 3 - ASUS EZ Flash 3 - PC Cleaner Quiet Thermal Design: ASUS Quiet Thermal Solution - Stylish Fanless Design: MOS Heat-sink & Chipset Heat-sink solution - ASUS FAN Xpert 4 Core Precision Tweaker 2: - vVDDCR CPU: Adjustable CPU
TUF X470-PLUS GAMING specifications summary 2 x USB 3.1 Gen 1 (up to 5Gbps) connectors support additional 4 USB ports 2 x USB 2.0/1.1 connectors support additional 4 USB ports 6 x SATA 6 Gb/s connectors 1 x M.2 Socket 3 for M Key, type 2242/ 2260/ 2280/ 22110 storage devices support (Supports both PCIe and SATA modes) 1 x M.
Package contents Check your motherboard package for the following items. Motherboard TUF X470-PLUS GAMING Cables 2 x SATA 6 Gb/s cables 1 x I/O shield Accessories 1 x M.2 screw package 1 x TUF Gaming Sticker 1 x TUF Certification card Application DVD Motherboard support DVD Documentation User guide If any of the above items is damaged or missing, contact your retailer.
Installation tools and components 1 Bag of screws Phillips (cross) screwdriver PC chassis Power supply unit AMD AM4 CPU AMD AM4/AM3 compatible CPU Fan DDR4 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package.
xiv
Product Introduction Product Introduction 1.1 Motherboard overview 1.1.1 Before you proceed 1 Chapter 1 Chapter 1: Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
1.1.2 Motherboard layout 1 Chapter 1 KBMS_910 2 3 24.4cm(9.6in) EATX12V DIGI +VRM 4 2 CHA_FAN2 2280 2260 2242 RGB_HEADER EATXPWR 30.5cm(12in) 6 7 SATA6G_6 SATA6G_5 PCIEX16_1 ® RTL 8111H AMD® X470 BATTERY PCIEX1_1 5 1 U31G1_34 M.
Layout contents 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. CPU and chassis fan connectors; AIO pump connector (4-pin CPU_FAN, 4-pin CHA_FAN1-3; 4-pin AIO_PUMP) AM4 CPU socket DDR4 DIMM slots AURA RGB header (4-pin RGB_HEADER) USB 3.1 Gen 1 connectors (20-1 pin U31G1_12, U31G1_34) M.2 Socket 3 AMD Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-6) System panel connectors (20-5 pin PANEL) USB 2.
1.1.3 Central Processing Unit (CPU) Chapter 1 The motherboard comes with an AM4 socket designed for AMD Ryzen™ 2nd Generation/ Ryzen™ with Radeon™ Vega Graphics/ Ryzen™ 1st Generation/ 7th Generation A-Series/ Athlon X4 processors. ® TUF X470-PLUS GAMING CPU socket AM4 The AM4 socket has a different pinout design. Ensure that you use a CPU designed for the AM4 socket. The CPU fits in only one correct orientation.
DIMM_A2* DIMM_B2* DIMM_A2* Chapter 1 Recommended memory configurations DIMM_A1 DIMM_A2* DIMM_B1 DIMM_B2* Memory configurations You may install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered DDR4 DIMMs into the DIMM sockets. • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
1.1.5 Expansion slots Chapter 1 Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. PCIEX16_1 ® PCIEX1_1 PCIEX16_2 PCIEX1_2 PCIEX1_3 Slot No. 1-6 Slot Description 1 PCIe 3.0 x16_1 slot 2 PCIe 2.0 x1_1 slot 3 PCIe 2.0 x16_2 slot 4 PCIe 2.0 x1_2 slot 5 PCIe 2.
AMD Ryzen™ 2nd Generation/ Ryzen™ 1st Generation Processors PCIe operating mode PCIe 3.0 x16_1 PCIe 2.0 x16_2 Single VGA/PCIe card x16 N/A Dual VGA/PCIe card x16 x4 Chapter 1 VGA Configuration AMD Ryzen™ with Radeon™ Vega Graphics/ 7th Generation A-Series/ Athlon X4 Processors VGA Configuration PCIe operating mode PCIe 3.0 x16_1 PCIe 2.0 x16_2 Single VGA/PCIe card x8 N/A Dual VGA/PCIe card x8 x4 • We recommend that you provide sufficient power when running CrossFireX™ mode.
1.1.6 1. Jumpers Clear RTC RAM jumper (2-pin CLRTC) Chapter 1 This jumper allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords. ® +3V_BAT GND CLRTC PIN 1 TUF X470-PLUS GAMING Clear RTC RAM To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Use a metal object such as a screwdriver to short the two pins. 3. Plug the power cord and turn ON the computer. 4.
1.1.7 1. Internal connectors Front panel audio connector (10-1 pin AAFP) Chapter 1 SENSE2_RETUR AGND NC SENSE1_RETUR This connector is for a chassis-mounted front panel audio I/O module that supports HD Audio. Connect one end of the front panel audio I/O module cable to this connector.
3. AMD Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-6) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. Chapter 1 If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, and RAID 10 configuration through the onboard AMD X470 chipset.
4. USB 2.0 connectors (10-1 pin USB1112; USB1314) PIN 1 USB+5V USB_P11USB_P11+ GND PIN 1 USB+5V USB_P13USB_P13+ GND ® USB+5V USB_P12USB_P12+ GND NC USB1112 USB+5V USB_P14USB_P14+ GND NC USB1314 Chapter 1 These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mb/s connection speed.
6. System panel connector (20-5 pin PANEL) This connector supports several chassis-mounted functions. PANEL PIN 1 ® +HDD_LED- SPEAKER +5V GND GND Speaker HDD_LED+ HDD_LEDGND RSTCON# NC PLED+ PLED+ PLEDPWRBTN# GND PWR_SW RESET PLED- Chapter 1 +PWR_LED- +PWR_LED- * Requires an ATX power supply TUF X470-PLUS GAMING System panel connector • System power LED (2-pin or 3-1 pin PLED) The 2-pin or 3-1 pin connector is for the system power LED. Connect the chassis power LED cable to this connector.
7. CPU and chassis fan connectors; AIO pump connectors (4-pin CPU_FAN, 4-pin CHA_FAN1-3; 4-pin AIO_PUMP) B C D D ® E CHA_FAN2 B CPU_FAN C CHA_FAN1 CPU FAN PWM CPU FAN IN CPU FAN PWR GND A CHA FAN PWM CHA FAN IN CHA FAN PWR GND A AIO_PUMP E GND AIO PUMP PWR AIO PUMP IN AIO PUMP PWM GND CHA FAN PWR CHA FAN IN CHA FAN PWM CHA_FAN3 CHA FAN PWM CHA FAN IN CHA FAN PWR GND TUF X470-PLUS GAMING Fan connectors • DO NOT forget to connect the fan cables to the fan connectors.
8. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
10. M.2 sockets (M.2_1; M.2_2) These sockets allow you to install M.2 SSD modules. A 22110 2280 2260 Chapter 1 M.2_1(SOCKET3) 2242 B M.2_2(SOCKET3) A ® B 2280 2260 2242 TUF X470-PLUS GAMING M.2 sockets • AMD Ryzen™ 2nd Generation/ Ryzen™ with Radeon™ Vega Graphics/ Ryzen™ 1st Generation Processors, the M.2_1 socket supports PCIe 3.0 x4 mode and SATA mode M Key design and type 2242 / 2260 / 2280 / 22110 storage devices. • AMD 7th Generation A-Series/ Athlon X4 Processors, the M.
11. AURA RGB header (4-pin RGB_HEADER) This connector is for RGB LED strips. RGB_HEADER Chapter 1 B R G +12V PIN 1 ® TUF X470-PLUS GAMING RGB Header The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 3A (12V), and no longer than 3 m. Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply.
Chapter 2: Basic Installation Basic Installation 2.1 Building your PC system 2 The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. 2.1.1 Motherboard installation Install the ASUS I/O Shield to the chassis rear I/O panel. 2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’ rear I/O panel. Chapter 2 1.
3. Place eight (8) screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 ® DO NOT over tighten the screws! Doing so can damage the motherboard.
2.1.2 CPU installation The AMD AM4 socket is compatible with AMD AM4 processors. Ensure you use a CPU designed for the AM4 socket. The CPU fits in only one correct orientation.
2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.
Type 2 2 Chapter 2 1 3 When using this type of CPU fan, remove the screws and the retention module only. Do not remove the plate on the bottom.
2.1.
2.1.5 ATX power connection A B Chapter 2 OR Ensure to connect the 8-pin power plug. 2.1.
2.1.7 Front I/O connector To install the front panel connector To install front panel audio connector AAFP Chapter 2 To install USB 3.1 Gen 1 connector To install USB 2.0 connector USB 3.1 Gen 1 USB 2.
2.1.
2.1.9 M.2 installation Supported M.2 type varies per motherboard.
2.2 Motherboard rear and audio connections 2.2.1 Rear I/O connection 9 8 7 6 3 5 4 Chapter 2 2 1 Rear panel connectors 1. PS/2 keyboard/ mouse combo port 2. USB 3.1 Gen 2 (up to 10Gbps) ports 3. LAN (RJ-45) port* 4. Audio I/O ports** 5. USB 3.1 Gen 1 (up to 5Gbps) ports 6. HDMI port 7. USB 3.1 Gen 1 (up to 5Gbps) port (Type-C) 8. DVI-D port 9. USB 2.0 ports * and ** : Refer to the tables on the next page for LAN port LEDs, and audio port definitions. • USB 3.
* LAN ports LED indications Activity Link LED ACT/LINK SPEED LED LED Speed LED Status Description Status Description Off No link Off Orange Linked Orange 100 Mbps connection Orange (Blinking) Data activity Orange (Blinking then steady) Green 10 Mbps connection LAN port 1 Gbps connection Ready to wake up from S5 mode ** Audio 2, 4, 6 or 8-channel configuration Chapter 2 Port Light Blue Lime Pink Orange Black 2.2.
Connect to Stereo Speakers Chapter 2 Connect to 2.1 channel Speakers Connect to 4.
Connect to 5.1 channel Speakers Chapter 2 Use only the light blue audio port for Side Speaker Out in a 5.1 channel configuration. Connect to 7.
2.3 Starting up for the first time 1. After making all the connections, replace the system case cover. 2. Ensure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector. 5. Turn on the devices in the following order: Monitor b. External SCSI devices (starting with the last device on the chain) c.
Chapter 2 2-16 Chapter 2: Basic Installation
Chapter 3: BIOS Setup BIOS Setup 3.1 Knowing BIOS 3 The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboardonly BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system. The term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.
3.2 BIOS setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup, press or during the Power-On Self Test (POST). If you do not press or , POST continues with its routines. Entering BIOS Setup after POST To enter BIOS Setup after POST: • Press ++ simultaneously.
3.2.1 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance, mode and boot device priority. To access the Advanced Mode, select Advanced Mode or press the hotkey for the advanced BIOS settings. The default screen for entering the BIOS setup program can be changed. Refer to the Setup Mode item in section Boot menu for details.
3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. To switch from EZ Mode to Advanced Mode, click Advanced Mode(F7) or press the hotkey.
Menu bar The menu bar on top of the screen has the following main items: My Favorites For saving the frequently-used system settings and configuration. Main For changing the basic system configuration Ai Tweaker For changing the overclocking settings Advanced For changing the advanced system settings Monitor For displaying the system temperature, power status, and changing the fan settings.
AURA (F4) This button allows you to turn the RGB LED lighting or functional LED on or off. [ON] All AURA effects will be enabled. (Default mode) [OFF] All AURA effects will be disabled. Search on FAQ Move your mouse over this button to show a QR code, scan this QR code on your mobile device to connect to the BIOS FAQ web page of the ASUS support website. You can also scan the following QR code: Hot keys This button above the menu bar contains the navigation keys for the BIOS setup program.
3.2.3 Q-Fan Control The QFan Control allows you to set a fan profile or manually configure the operating speed of your CPU and chassis fans.
Configuring fans manually Select Manual from the list of profiles to manually configure your fans’ operating speed. Speed points Select to manually configure your fans To configure your fans: Chapter 3 3-8 1. Select the fan that you want to configure and to view its current status. 2. Click and drag the speed points to adjust the fans’ operating speed. 3. Click Apply to save the changes then click Exit (ESC).
3.3 My Favorites My Favorites is your personal space where you can easily save and access your favorite BIOS items. ASUS TUF X470-PLUS GAMING Chapter 3 My Favorites comes with several performance, power saving, and fast boot related items by default. You can personalize this screen by adding or removing items.
Adding items to My Favorites To add BIOS items: 1. Press on your keyboard or click Setup Tree Map screen. from the BIOS screen to open 2. On the Setup Tree Map screen, select the BIOS items that you want to save in My Favorites screen. Main menu panel Selected shortcut items Submenu panel Delete all favorite items Recover to default favorite items 3.
3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. Security The Security menu items allow you to change the system security settings. 3.5 • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. See section 1.1.
OC Tuner The OC tuner automatically overclocks the CPU and DRAM frequencies and voltages respectively to enhance the system performance. It also boosts the CPU graphics performance according to the CPU graphics loading. Configuration options: [Keep Current Settings] [OC Tuner] To keep the current overclocking tuner status, select [Keep Current Settings]. 3.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices.
IGFX Multi-Monitor Enables or disables the Internal Graphics Device Multi-Monitor support for add-on VGA devices. And the memory size of Internal Graphics Device will keep memory reserved. Configuration options: [Disabled] [Enabled] The IGFX Multi-Monitor item must be enabled before using AMD Dual Graphics technology. Primary Video Device Selects the primary display device.
3.6.5 Onboard Devices Configuration The items in this menu allow you to switch between PCIe Lanes and configure onboard devices. HD Audio Controller This item allows you to use the Azalia High Definition Audio Controller. Configuration options: [Disabled] [Enabled] PCIEX16_1 Bandwidth This item displays on AMD Ryzen™ with Radeon™ Vega Graphics/ 7th Generation A-Series processors. [X8 Mode] The PCIe x16_1 slot runs at x8 mode. [PCIe RAID Mode] T he Hyper M.2 x16 card and other add-on M.
Restore On AC Power Loss This item allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] Power On By PCI-E This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN controller or other installed PCI-E LAN cards.
3.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Q-Fan Configuration The subitems in this menu allow you to configure the Q-Fan features. Qfan Tuning Click this item to automatically detect the lowest speed and configure the minimum duty cycle for each fan. 3.8 Boot menu The Boot menu items allow you to change the system boot options. Fast Boot [Disabled] Allows your system to go back to its normal boot speed.
The following items appear only when you set the Launch CSM to [Enabled]. Boot Devices Control [UEFI and Legacy OPROM] This item allows you to select the type of devices that you want to boot. Configuration options: [UEFI and Legacy OPROM] [Legacy OPROM only] [UEFI only] Boot from Network Devices [Legacy only] This item allows you to select the type of network devices that you want to launch.
3.9.2 ASUS User Profile This item allows you to store or load multiple BIOS settings. Load from Profile This item allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile number that saved your BIOS settings, press , and then select Yes. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/ CPU configuration and BIOS version.
3.11 Updating BIOS The ASUS website publishes the latest BIOS versions to provide enhancements on system stability, compatibility,and performance. However, BIOS updating is potentially risky. If there is no problem using the current version of BIOS, DO NOT manually update the BIOS. Inappropriate BIOS updating may result to system’s failure to boot. Carefully follow the instructions in this chapter to update your BIOS when necessary. Visit http://www.asus.
3.11.2 ASUS EZ Flash 3 ASUS EZ Flash 3 allows you to download and update to the latest BIOS through the Internet without having to use a bootable floppy disk or an OS‑based utility. Updating through the Internet varies per region and Internet conditions. Check your local Internet connection before updating through the Internet. To update the BIOS by USB: Chapter 3 3-20 1. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select ASUS EZ Flash Utility and press . 2.
• This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only. • DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit Menu for details. 1. Enter the Advanced Mode of the BIOS setup program.
3.11.3 ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file. The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at https://www.asus.
Chapter 4: RAID Support RAID Support 4.1 AMD RAID Array configurations 4 The motherboard comes with the RaidXpert2 Configuration Utility that supports Volume, RAIDABLE, RAID 0, RAID 1, and RAID 10 (depends on system licensing) configurations. For more information on configuring your RAID sets, please refer to the RAID Configuration Guide which you can find at https://www.asus.com/support. 4.1.
Appendix Appendix Appendix Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) Appendix This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
REACH Appendix Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
Appendix English ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support Français AsusTek Computer Inc. déclare par la présente que cet appareil est conforme aux critères essentiels et autres clauses pertinentes des directives concernées.
ASUS contact information ASUSTeK COMPUTER INC. Technical Support Telephone Fax Online support 4F, No. 150, Li-Te Road, Peitou, Taipei 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 www.asus.com Appendix Address Telephone Fax Web site +86-21-38429911 +86-21-5866-8722, ext. 9101# http://qr.asus.com/techserv ASUS COMPUTER INTERNATIONAL (America) Address 800 Corporate Way, Fremont, CA 94539, USA Telephone +1-510-739-3777 Fax +1-510-608-4555 Web site http://www.asus.
Appendix DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: Asus Computer International 800 Corporate Way, Fremont, CA 94539. Address: Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : Motherboard Model Number : TUF X470-PLUS GAMING Conforms to the following specifications: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: This device complies with part 15 of the FCC Rules.
