User Guide

ASUS TUSL2-C User’s Manual

3. HARDWARE SETUP

Motherboard Settings

3. H/W SETUP

3) Onboard Audio Setting (AUDIO_EN) (audio model only)

The onboard 6 channel Audio chip may be enabled or disabled using these

jumpers. Disable the onboard Audio Codec if using a PCI audio card on any of

the expansion slots or a primary audio/modem CNR on a CNR slot, (see section

3.7.3 CNR Slot).

Setting AUDIO_EN

Disable [1-2]

Enable [2-3] (default)

TUSL2-C

TUSL2-C Audio Setting

Disable

Enable

(Default)

AUDIO_EN

4) Keyboard Power Up (KBPWR)

This jumper disables or enables the keyboard power up function. Set this jumper

to Enable if you wish the keyboard (by pressing <Spacebar>) to power up the

computer. This feature requires an ATX power supply that can supply at least

300mA on the +5VSB lead. The default is set to Disable because not all

computers have the appropriate ATX power supply. The computer will not power

ON if you set this to Enable and if the wrong ATX power supply is connected.

NOTE: This jumper must be set in conjunction with Wake On PS2 KB/PS2

Mouse/CIR in 4.5.1 Power Up Control.

Setting KBPWR

Enable [1-2] (default)

Disable [2-3]

TUSL2-C

TUSL2-C Keyboard Power Setting

KBPWR

Disable

Enable

(Default)