User Guide

ASUS TUV4X User’s Manual

3. HARDWARE SETUP

6) USB Device Wake-up Jumpers (3-pin USBPWR0, USBPWR1)

These jumpers allow you to enable or disable the USB wake-up feature on the

motherboard. Set these two jumpers to ENABLE if you wish to use the USB

devices to wake up the computer. This feature requires an ATX power supply

that can supply at least 2A on the +5VSB lead. The default setting for both

USBPWR0 and USBPWR1 is DISABLE.

NOTES:

1. Before setting either of these jumpers to ENABLE, make sure that you have

the appropriate power supply, otherwise the computer does not power up.

2. If you would like to enable the USB wake-up feature, choose ENABLE

for both USBPWR0 and USBPWR1 settings.

3. The total current consumed must NOT exceed the power supply capability

(+5VSB) whether under normal working conditions or in sleep mode.

3. H/W SETUP

Motherboard Settings

TUV4X USB Device Wake Up

USB_PWR0

USB_PWR1

TUV4X

Enable

Disable

(Default)

Enable

Disable

(Default)