User's Manual

9
English
English
HZ-1 USB 3.0 Docking Station User Guide
English
English
Installing your HZ-1 USB 3.0 docking station
Installing the drivers
1. Place the Driver CD into your computer's optical drive.
2. Click Setup.exe.
3. Select your language and click I Accept.
4. Wait until the drivers are installed successfully in your computer.
Setting up your docking station
To set up your docking station:
1. Connect one end of the bundled power
adapter to the DC IN port on your
docking station and the other end to a
100-240V AC power outlet.
Use only the bundled power
adapter. Using other power
adapters may damage your
device.
2. Connect the square end of the bundled
USB 3.0 cable to the USB 3.0 upstream
port on your docking station and the
other end to your computer's USB 3.0
port.
1
2
• It is normal if your computer screen goes black or ashes temporarily during the driver
installation process.
• Ensure that you install the driver before connecting the docking station to your computer.