E8438 First Edition June 2013 Notebook PC E-Manual UX302 Series
COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Table of Contents About this manual......................................................................................................6 Conventions used in this manual.............................................................................. 7 Icons..................................................................................................................................... 7 Typography..............................................................................................................
Start screen........................................................................................................................ 37 Windows® Apps............................................................................................................... 37 Hotspots.............................................................................................................................. 38 Working with Windows® apps................................................................................
Tips and FAQs Useful tips for your Notebook PC.........................................................................86 Hardware FAQs............................................................................................................87 Software FAQs..............................................................................................................90 Appendices DVD-ROM Drive Information (on selected models)............................................
About this manual This manual provides information about the hardware and software features of your Notebook PC, organized through the following chapters: Chapter 1: Hardware Setup This chapter details the hardware components of your Notebook PC. Chapter 2: Using your Notebook PC This chapter shows you how to use the different parts of your Notebook PC. Chapter 3: Working with Windows® 8 This chapter provides an overview of using Windows® 8 in your Notebook PC.
Conventions used in this manual To highlight key information in this manual, some text are presented as follows: IMPORTANT! This message contains vital information that must be followed to complete a task. NOTE: This message contains additional information and tips that can help complete tasks. WARNING! This message contains important information that must be followed to keep you safe while performing tasks and prevent damage to your Notebook PC's data and components.
Safety precautions Using your Notebook PC This Notebook PC should only be used in environments with ambient temperatures between 5°C (41°F) and 35°C (95°F). Refer to the rating label on the bottom of your Notebook PC and ensure that your power adapter complies with this rating. Do not leave your Notebook PC on your lap or near any part of your body to prevent discomfort or injury from heat exposure. Do not use damaged power cords, accessories, and other peripherals with your Notebook PC.
Caring for your Notebook PC Disconnect the AC power and remove the battery pack (if applicable) before cleaning your Notebook PC. Use a clean cellulose sponge or chamois cloth dampened with a solution of nonabrasive detergent and a few drops of warm water. Remove any extra moisture from your Notebook PC using a dry cloth. Do not use strong solvents such as thinners, benzene, or other chemicals on or near your Notebook PC. Do not place objects on top of your Notebook PC.
Proper disposal Do not throw your Notebook PC in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercurycontaining button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products. Do not throw the battery in municipal waste.
Chapter 1: Hardware Setup Notebook PC E-Manual 11
Getting to know your Notebook PC Top View NOTE: The keyboard's layout may vary per region or country. The top view may also vary in appearance depending on the Notebook PC model.
Array microphones The array microphones feature echo canceling, noise suppression, and beam forming functions for better voice recognition and audio recording. Ambient light sensor The ambient light sensor detects the amount of ambient light in your environment. It allows the system to automatically adjust the brightness of the display depending on the ambient light condition. Camera The built-in camera allows you to take pictures or record videos using your Notebook PC.
Power button Press the power button to turn your Notebook PC on or off. You can also use the power button to put your Notebook PC to sleep or hibernate mode and wake it up from sleep or hibernate mode. In the event that your Notebook PC becomes unresponsive, press and hold the power button for about four (4) seconds until your Notebook PC shuts down. Power indicator The power indicator lights up when the Notebook PC is turned on and blinks slowly when the Notebook PC is in sleep mode.
Bottom NOTE: The bottom side may vary in appearance depending on model. WARNING! The bottom of the Notebook PC can get warm to hot while in use or while charging the battery pack. When working on your Notebook PC, do not place it on surfaces that can block the vents. IMPORTANT! Battery time varies by usage and by the specifications for this Notebook PC. The battery pack cannot be disassembled. Air vents The air vents allow cool air to enter and warm air to exit the Notebook PC.
Right Side Headphone output jack port This port allows you to connect your Notebook PC to headphones. You can also use this port to connect your Notebook PC to an external microphone. HDMI port This port is for the HDMI (High-Definition Multimedia Interface) connector and is HDCP compliant for HD DVD, Blu-ray, and other protected content playback. USB 3.0 port This USB (Universal Serial Bus) 3.0 port provides a transfer rate of up to 5 Gbit/s and are backward compatible to USB 2.0.
Mini DisplayPort port Use a mini DisplayPort adapter to connect your Notebook PC to a DisplayPort, VGA, DVI, or HDMI external display and experience high-resolution display features. Power (DC) input port Insert the bundled power adapter into this port to charge the battery pack and supply power to your Notebook PC. WARNING! The adapter may become warm to hot while in use. Do not cover the adapter and keep it away from your body while it is connected to a power source.
Left Side USB 3.0 ports These USB (Universal Serial Bus) 3.0 ports provide a transfer rate of up to 5 Gbit/s and are backward compatible to USB 2.0. Memory card reader This built-in memory card reader supports SD and SDHC card formats.
Chapter 2: Using your Notebook PC Notebook PC E-Manual 19
Getting started Charge your Notebook PC. A. Plug the AC power adapter into a 100V~240V power source. B. Connect the DC power connector into your Notebook PC’s power (DC) input. Charge the Notebook PC for 3 hours before using it in battery mode for the first time. NOTE: The power adapter may vary in appearance, depending on models and your region.
NOTE: Power adapter information: • Input voltage: 100-240Vac • Input frequency: 50-60Hz • Rating output current: 2.37 A (45W)* or 3.42A (65W)* • Rating output voltage: 19V WARNING! Read the following precautions for your Notebook PC’s battery. • Only ASUS-authorized technicians should remove the battery inside the device. • The battery used in this device may present a risk of fire or chemical burn if removed or disassembled. • Follow the warning labels for your personal safety.
Lift to open the display panel. Press the power button.
Gestures for the touch screen panel and touchpad Gestures allow you to launch programs and access the settings of your Notebook PC. Refer to the following illustrations when using hand gestures on your touch screen panel and touchpad. Using the touch screen panel Left edge swipe Right edge swipe Swipe from the left edge of the screen to shuffle your running apps. Swipe from the right edge of the screen to launch the Charms bar.
Zoom out Zoom in Bring together your two fingers on the touch screen panel. Spread apart your two fingers on the touch screen panel. Top edge swipe Finger slide • In the Start screen, swipe from the top edge of the screen to view the All Apps bar. Slide your finger to scroll up and down and slide your finger to pan the screen left or right. • In a running app, swipe from the top edge of the screen to view its menu.
Using the touchpad Moving the pointer You can tap or click anywhere on the touchpad to activate its pointer, then slide your finger on the touchpad to move the pointer onscreen.
One-finger gestures Tap/Double tap • In the Start screen, tap an app to launch it. • In Desktop mode, double-tap an application to launch it. Drag and drop Double-tap an item, then slide the same finger without lifting it off the touchpad. To drop the item to its new location, lift your finger from the touchpad.
Left-click Right-click • In the Start screen, click an app to launch it. • • In Desktop mode, doubleclick an application to launch it. In the Start screen, click an app to select it and launch the settings bar. You can also press this button to launch the All Apps bar. • In Desktop mode, use this button to open the rightclick menu. NOTE: The areas inside the dotted line represent the locations of the left mouse button and the right mouse button on the touchpad.
Top edge swipe • In the Start screen, swipe from the top edge to launch the All Apps bar. • In a running app, swipe from the top edge to view its menu. Left edge swipe Right edge swipe Swipe from the left edge to shuffle Swipe the right edge to launch your running apps. the Charms bar.
Two-finger gestures Tap Rotate Tap two fingers on the touchpad to simulate the right-click function. To rotate an image, place two fingers on the touchpad then turn one finger clockwise or counterclockwise while the other stays still. Two-finger scroll (up/down) Two-finger scroll (left/right) Slide two fingers to scroll up or down. Slide two fingers to scroll left or right.
Zoom out Zoom in Bring together your two fingers on Spread apart your two fingers on the touchpad. the touchpad. Drag and drop Select an item then press and hold the left button. Using your other finger, slide down the touchpad to drag and drop the item to a new location.
Three-finger gestures Swipe up Swipe down Swipe three fingers upward to show all running applications. Swipe three fingers downward to show the Desktop mode.
Using the keyboard Function keys The function keys on your Notebook PC’s keyboard can trigger the following commands: Puts the Notebook PC into Sleep mode Turns Airplane mode on or off NOTE: When enabled, the Airplane mode disables all wireless connectivity.
Toggles the display mode NOTE: Ensure that the second display is connected to your Notebook PC. Enables or disables the touchpad Turns the speaker on or off Turns the speaker volume down Turns the speaker volume up Toggles the ambient light sensor on or off Function key for Power4Gear Hybrid Your Notebook PC also comes with a special set of function key that can be used to launch an ASUS app.
Windows®8 keys There are two special Windows® keys on your Notebook PC’s keyboard used as below: Press this key to go back to the Start screen. If you are already in the Start screen, press this key to go back to the last app you opened. Press this key to simulate the right-click functions.
Chapter 3: Working with Windows® 8 Notebook PC E-Manual 35
Starting for the first time When you start your computer for the first time, a series of screens appear to guide you in configuring the basic settings of your Windows® 8 operating system. To start your Notebook PC for the first time: 1. Press the power button on your Notebook PC. Wait for a few minutes until the setup screen appears. 2. From the setup screen, pick a language to use on your Notebook PC. 3. Carefully read the License Terms. Tick I accept the terms for using Windows then click Accept. 4.
Windows® UI Windows® 8 comes with a tile-based user interface (UI) which allows you to organize and easily access Windows® apps from the Start screen. It also includes the following features that you can use while working on your Notebook PC. Start screen The Start screen appears after successfully signing in to your user account. It helps organize all the applications you need in just one place.
Hotspots Onscreen hotspots allow you to launch programs and access the settings of your Notebook PC. The functions in these hotspots can be activated using the touchpad.
Hotspot Action upper left corner Hover your mouse pointer on the upper left corner then tap on the recent app’s thumbnail to revert back to that running app. If you launched more than one app, slide down to show all running apps. lower left corner From a running app screen: Hover your mouse pointer on the lower left corner then tap on the Start screen’s thumbnail to go back to the Start screen. NOTE: You can also press the Windows key on your keyboard to go back to the Start screen.
Hotspot Action top side Hover your mouse pointer on the top side until it changes to a hand icon. Drag then drop the app to a new location. NOTE: This hotspot function only works on a running app or when you want to use the Snap feature. For more details, refer to the Snap feature under Working with Windows® apps. upper or lower right corner 40 Hover your mouse pointer on the upper or lower right corner to launch the Charms bar.
Working with Windows® apps Use your Notebook PC’s touch screen panel, touchpad, or keyboard to launch, customize, and close apps. Launching apps Tap an app to launch it. Position your mouse pointer over the app then left-click or tap once to launch it. Press twice then use the arrow keys to browse through the apps. Press to launch an app.
Resizing apps 1. Swipe down the app tile to select and launch the settings bar. 2. Tap to reduce or to enlarge the app tile. Right-click on the app to activate its settings bar then tap or . Unpinning apps 1. Swipe down the app tile to select and launch the settings bar. 2. Tap to unpin an app. Right-click on the app to activate the settings bar then tap 42 .
Closing apps Tap and hold the top side of the running app then drag it down to the bottom of the screen to close it. 1. Move your mouse pointer on the top side of the launched app then wait for the pointer to change to a hand icon. 2. Drag then drop the app to the bottom of the screen to close it. From the running app’s screen, press Notebook PC E-Manual .
Accessing the Apps screen Aside from the apps already pinned on your Start screen, you can also open other applications through the Apps screen.
Launching the Apps screen Launch the Apps screen using your Notebook PC's touch screen, touchpad, or keyboard. 1. Swipe from the top or bottom edge of the screen to launch the All Apps bar. 2. Tap to show all installed apps in your Notebook PC. Swipe from the top edge to launch the All Apps bar. From the Start screen, press All Apps icon Notebook PC E-Manual then press to select the .
Pinning more apps on the Start screen You can pin more apps on the Start screen using your touch screen or touchpad. 1. In the Apps screen, swipe down the app to select and launch the settings bar. 2. Tap to pin the selected app on the Start screen. 46 1. Position the mouse pointer over the app you want to pin on the Start screen. 2. Right-click on the app to activate its settings. 3. Tap on the icon.
Charms bar The charms bar is a toolbar that can be triggered on the right side of your screen. It consists of several charms that allow you to share applications and provide quick access for customizing the settings of your Notebook PC.
Launching the charms bar NOTE: When called out, the charms bar initially appears as a set of white icons. The image above shows how the charms bar looks like once activated. Use your Notebook PC’s touch screen, touchpad, or keyboard to launch the charms bar. Swipe from the right edge of the screen to launch the charms bar. Move your mouse pointer on the upper or lower right corner of the screen. Press 48 .
Inside the charms bar Search This charm allows you to look for files, applications, or programs in your Notebook PC. Share This charm allows you to share applications via social networking sites or email. Start This charm reverts the display back to the Start screen. From the Start screen, you can also use this to revert back to a recently opened app. Devices This charm allows you to access and share files with the devices attached to your Notebook PC such as an external display or printer.
Snap feature The Snap feature displays two apps side-by-side, allowing you to work or switch between apps. IMPORTANT! Ensure that your Notebook PC’s screen resolution is set to 1366 x 768 pixels or higher before using the Snap feature.
Using Snap Use your Notebook PC’s touch screen, touchpad or keyboard to activate and use Snap. 1. Launch the app you wish to snap. 2. Tap and hold the app’s topmost part then drag it to the left or right side of the screen until the snap bar appears. 3. Launch another app. 1. Launch the app you wish to snap. 2. Hover the mouse point on the top side of your screen. 3. Once the pointer changes to a hand icon, drag then drop the app to the left or right side of the display panel. 4.
Other keyboard shortcuts Using the keyboard, you can also use the following shortcuts to help you launch applications and navigate Windows®8.
Opens the Second screen pane Opens the Apps search pane Opens the Run window Opens Ease of Access Center Opens the Settings charm Opens a menu box of Windows® tools Launches the magnifier icon and zooms in your screen Zooms out your screen Opens the Narrator Settings Notebook PC E-Manual 53
Connecting to wireless networks Wi-Fi Access emails, surf the Internet, and share applications via social networking sites using your Notebook PC’s Wi-Fi connection. IMPORTANT! The Airplane mode disables this feature. Ensure that Airplane mode is turned off before enabling the Wi-Fi connection of your Notebook PC. Enabling Wi-Fi Activate Wi-Fi in your Notebook PC using the following steps on your touch screen or touchpad. 1. Launch the Charms bar. 2. Tap/click 3.
4. Tap/click Connect to start the network connection. NOTE: You may be prompted to enter a security key to activate the Wi-Fi connection. or 5. If you want to enable sharing between your Notebook PC and other wireless-enabled systems, tap Yes, turn on sharing and connect to devices. Tap*/click No, don't turn on sharing or connect to devices if you do not want to enable the sharing function.
Bluetooth Use Bluetooth to facilitate wireless data transfers with other Bluetoothenabled devices. IMPORTANT! The Airplane mode disables this feature. Ensure that Airplane mode is turned off before enabling the Bluetooth connection of your Notebook PC. Pairing with other Bluetooth-enabled devices You need to pair your Notebook PC with other Bluetooth-enabled devices to enable data transfers. To do this, use your touch screen* or touchpad as follows: 1. Launch the Charms bar. 2. Tap/click or Settings.
4. or Select a device from the list. Compare the passcode on your Notebook PC with the passcode sent to your chosen device. If they are the same, tap/click Yes to successfully pair your Notebook PC with the device. NOTE: For some bluetooth-enabled devices, you may be prompted to key in the passcode of your Notebook PC.
Airplane mode The Airplane mode disables wireless communication, allowing you to use your Notebook PC safely while in-flight. Turning Airplane mode on 1. Launch the Charms bar. 2. Tap/click 3. Move the slider to the right to turn the Airplane mode on. and tap/click . or . Press Turning Airplane mode off or 1. Launch the Charms bar. 2. Tap/click 3. Move the slider to the left to turn the Airplane mode off. Press and tap/click . .
Connecting to wired networks You can also connect to wired networks, such as local area networks and broadband Internet connection, using your Notebook PC’s LAN port. NOTE: Contact your Internet Service Provider (ISP) for details or your network administrator for assistance in setting up your Internet connection. To configure your settings, refer to the following procedures.
5. Click Internet Protocol Version 4(TCP/IPv4) then tap Properties. 6. Click Obtain an IP address automatically then tap OK. NOTE: Proceed to the next steps if you are using PPPoE connection. 7. Return to the Network and Sharing Center window then tap Set up a new connection or network. 8. Select Connect to the Internet then tap Next. 9. Click Broadband (PPPoE). 10. Type your User name, Password, and Connection name then tap Connect. 11. Click Close to finish the configuration. 12.
Configuring a static IP network connection 1. Repeat steps 1 to 5 under Configuring a dynamic IP/PPPoE network connection. 2 Tap Use the following IP address. 3. Type the IP address, Subnet mask and Default gateway from your service provider. 4. If needed, you can also type the preferred DNS server address and alternate DNS server address then tap OK.
Turning your Notebook PC off You can turn off your Notebook PC by doing either of the following procedures: • Tap/click tap/click or from the Charms bar then > Shut down to do a normal shutdown. • From the log-in screen, tap/click > Shut down. • You can also shut down your Notebook PC using Desktop mode. To do this, launch the desktop then press alt + f4 to launch the Shut Down window. Select Shut Down from the drop-down list then select OK.
Chapter 4: ASUS apps Notebook PC E-Manual 63
Featured ASUS Apps Power4Gear Hybrid Optimize the performance of your Notebook PC using the power saving modes in Power4Gear. NOTE: Unplugging the Notebook PC from its power adapter automatically switches Power4Gear Hybrid to Battery Saving mode. Launching Power4Gear Hybrid Press 64 .
Running System This option allows you to enable either of the following power saving modes in your Notebook PC. NOTE: By default, your Notebook PC is set to Performance mode. Performance mode Use this mode when doing high-performance activities like playing games or conducting business presentations using your Notebook PC. Battery Saving mode This mode extends your Notebook PC’s battery life while plugged in to the power adapter or while running on battery power only. Select from these power saving modes.
System in Sleep This option allows you to enable or disable either of the following sleep modes: Instant On This mode is default-enabled in your Notebook PC. It allows the system to return to its last working state even after your Notebook PC has entered into sleep mode. Move this slider to switch between Instant On or Long Standby Time.
Long Standby Time This mode allows your Notebook PC’s battery to last for up to sixty-nine (69) days or more. When enabled, the Notebook PC returns to its last working state in as fast as seven seconds, four hours after entering into deep sleep mode.
Notebook PC E-Manual
Chapter 5: Power-on Self Test (POST) Notebook PC E-Manual 69
The Power-on Self Test (POST) The Power-on Self Test (POST) is a series of software-controlled diagnostic tests that run when you turn on or restart your Notebook PC. The software that controls the POST is installed as a permanent part of the Notebook PC’s architecture. Using POST to access BIOS and Troubleshoot During POST, you can access the BIOS settings or run troubleshooting options using the function keys of your Notebook PC. You may refer to the following information for more details.
BIOS Settings NOTE: The BIOS screens in this section are for reference only. The actual screens may differ by model and territory. Boot This menu allows you to set your boot option priorities. You may refer to the following procedures when setting your boot priority. On the Boot screen, select Boot Option #1. 1. Main Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
2. Press Main and select a device as the Boot Option #1. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Security This menu allows you to set up the administrator and user password of your Notebook PC. It also allows you to control the access to your Notebook PC’s hard disk drive, input/output (I/O) interface, and USB interface. NOTE: Main • If you install a User Password, you will be prompted to input this before entering your Notebook PC's operating system. • If you install an Administrator Password, you will be prompted to input this before entering BIOS.
To set the password: 1. On the Security screen, select Administrator Password or User Password. 2. Type in a password then press 3. Re-type to confirm the password then press . . To clear the password: 1. On the Security screen, select Administrator Password or User Password. 2. Type in the current password then press 3. Leave the Create New Password field blank then press . . 4. 74 Select Yes in the confirmation box then press .
I/O Interface Security In the Security menu, you can access I/O Interface Security to lock or unlock some interface functions of your Notebook PC. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Security I/O Interface Security LAN Network Interface [UnLock] Wireless Network Interface [UnLock] HD AUDIO Interface [UnLock] If Locked, LAN controller will be disabled.
USB Interface Security Through the I/O Interface Security menu, you can also access USB Interface Security to lock or unlock ports and devices. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Security USB Interface Security USB Interface [UnLock] External Ports [UnLock] CMOS Camera [UnLock] Card Reader Lock [UnLock] USB Interface UnLock If Locked, all USB device will be disabled →← : Select Screen : Select Item ↑↓ Enter: Select +/— : Change Opt.
Set Master Password In the Security menu, you can use Set Master Password to set up a password-enabled access to your hard disk drive. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Main Setup Advanced Security(C) Save Exit Aptio UtilityBoot - Copyright 2011 &American Megatrends, Inc. Password Description Set HDD Master Password. If ONLY the Administrator’s password is set,then this only limits access to Setup and is only asked for when entering Setup.
Save & Exit To keep your configuration settings, select Save Changes and Exit before exiting the BIOS. Main Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Advanced Boot Security Save & Exit Save Changes and Exit Discard Changes and Exit Exit system setup after saving the changes.
To update the BIOS: 1. Verify the Notebook PC’s exact model then download the latest BIOS file for your model from the ASUS website. 2. Save a copy of the downloaded BIOS file to a flash disk drive. 3. Connect your flash disk drive to your Notebook PC. 4. Restart your Notebook PC then press 5. during POST. From the BIOS menu, Select Advanced > Start Easy Flash, then press . Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
6. Locate your downloaded BIOS file in the flash disk drive then press . ASUSTek Easy Flash Utility FLASH TYPE: MXIC 25L Series New BIOS Current BIOS Platform: UX302 Platform: Unknown Version: 101 Version: Unknown Build Date: Oct 26 2012 Build Date: Unknown Build Time: 11:51:05 Build Time: Unknown FSO FS1 0 EFI
FS2 FS3 FS4 [←→]: Switch [↑↓]: Choose [q]: Exit [Enter]: Enter/Execute 7.Troubleshoot By pressing during POST, you can access Windows® 8 troubleshoot options which includes the following: • Refresh your PC • Reset your PC • Advanced options Refresh your PC Use Refresh your PC if you want to refresh your system without losing your current files and applications. To access this during POST: 1. Restart your Notebook PC then press 2. POST. Wait for Windows® to load the Choose an option screen then tap Troubleshoot. during 3. Tap Refresh your PC. 4.
Reset your PC IMPORTANT! Back up all your data before performing this option. Use Reset your PC to restore your Notebook PC to its default settings. To access this during POST: 1. Restart your Notebook PC then press during POST. 2. Wait for Windows® to load the Choose an option screen then tap Troubleshoot. 3. Tap Reset your PC. 4. In the Reset your PC screen, read the bullet points to learn more about using this option then tap Next. 5.
Advanced options Use Advanced options to perform additional troubleshooting options in your Notebook PC. To access this during POST: 1. Restart your Notebook PC then press during 2. POST. Wait for Windows® to load the Choose an option screen then tap Troubleshoot. 3. Tap Advanced options. 4. In the Advanced options screen, select the troubleshooting option you wish to perform. 5. Follow the succeeding steps to complete the process.
4. In the Advanced options screen, select System Image Recovery. 5. Choose an account you would like to recover using a system image file. 6. Type your account password then tap Continue. 7. Select Use the latest available system image (recommended), then tap Next. You can also choose Select a system image if your system image is in an external device or DVD. 8. Follow the succeeding steps to complete the system image recovery procedure.
Tips and FAQs Notebook PC E-Manual 85
Useful tips for your Notebook PC To help you maximize the use of your Notebook PC, maintain its system performance, and ensure all your data are kept secured, here are some useful tips that you can follow: • Update Windows® periodically to ensure that your applications have the latest security settings. • Use ASUS Live Update to update ASUS-exclusive applications, drivers and utilities in your Notebook PC. Refer to the ASUS Tutor installed in your Notebook PC for more details.
Hardware FAQs 1. A black dot, or sometimes a colored dot, appears onscreen when I turn on the Notebook PC. What should I do? Although these dots normally appear onscreen, they will not affect your system. If the incident continues and subsequently affects system performance, consult an authorized ASUS service center. 2. My display panel has an uneven color and brightness.
4. 5. 6. My battery LED indicator does not light up. What’s wrong? • Check whether the power adapter or battery pack is attached correctly. You may also disconnect the power adapter or battery pack, wait for a minute, then reconnect them again to the power outlet and Notebook PC. • If the problem still exists, contact your local ASUS service center for assistance. Why is my touchpad not working? • Press to enable your touchpad.
8. Why does audio still come out from my Notebook PC’s audio speakers even if I already connected my headphone into the right jack port? Go to Control Panel > Hardware and Sound then access Audio Manager to configure the settings. 9. My Notebook PC cannot do keystrokes correctly because my cursor keeps on moving. What should I do? Make sure that nothing accidentally touches or presses on your touchpad while you type on the keyboard. You can also disable your touchpad by pressing 10. .
Software FAQs 1. When I turn on my Notebook PC, the power indicator lights up but not my drive activity indicator. System bootup does not happen as well. What can I do to fix this? You can try doing any of the following suggestions: 2. • Force shutdown your Notebook PC by pressing the power button for more than four (4) seconds. Check if the power adapter and battery pack are inserted correctly then turn on your Notebook PC.
4. My Notebook PC does not boot up. How can I fix this? You can try doing any of the following suggestions: 5. • Remove all connected devices to your Notebook PC then restart your system. • Press F9 upon startup. When your Notebook PC enters Troubleshooting, select Refresh or Reset your PC. • If the problem still exists, contact your local ASUS service center for assistance.
6. How can I boot to DOS using my USB drive or ODD? Refer to the following steps: 92 a. Restart your Notebook PC and enter BIOS by pressing F2 on your keyboard. b. Go to Boot > Launch CSM > Enabled. c. Go to the Security menu then set Secure Boot Control to Disabled. d. Press F10 to save changes and exit BIOS. e. Press and hold ESC to launch boot menu when your Notebook PC restarts.
Appendices Notebook PC E-Manual 93
DVD-ROM Drive Information (on selected models) The DVD-ROM drive allows you to view and create your own CDs and DVDs. You can purchase an optional DVD viewer software to view DVD titles. Regional Playback Information Playback of DVD movie titles involves decoding MPEG2 video, digital AC3 audio and decryption of CSS protected content.
Region Definitions Region 1 Canada, US, US Territories Region 2 Czech, Egypt, Finland, France, Germany, Gulf States, Hungary, Iceland, Iran, Iraq, Ireland, Italy, Japan, Netherlands, Norway, Poland, Portugal, Saudi Arabia, Scotland, South Africa, Spain, Sweden, Switzerland, Syria, Turkey, UK, Greece, Former Yugoslav Republics, Slovakia Region 3 Burma, Indonesia, South Korea, Malaysia, Philippines, Singapore, Taiwan, Thailand, Vietnam Region 4 Australia, Caribbean (Except US Territories), Central America, Ne
Blu-ray ROM Drive Information (on selected models) The Blu-ray ROM Drive allows you to view high definition (HD) videos and other disc file formats such as DVDs and CDs. Region Definitions Region A North, Central and South American countries, and their territories; Taiwan, Hong Kong, Macao, Japan, Korea (South and North), South East Asian countries and their territories. Region B European, African, and South West Asian countries and their territories; Australia and New Zealand.
Overview On 4th August 1998 the European Council Decision regarding the CTR 21 has been published in the Official Journal of the EC. The CTR 21 applies to all non voice terminal equipment with DTMF-dialling which is intended to be connected to the analogue PSTN (Public Switched Telephone Network).
This table shows the countries currently under the CTR21 standard.
This information was copied from CETECOM and is supplied without liability. For updates to this table, you may visit http://www.cetecom.de/technologies/ctr_21. html 1 National requirements will apply only if the equipment may use pulse dialling (manufacturers may state in the user guide that the equipment is only intended to support DTMF signalling, which would make any additional testing superfluous). In The Netherlands additional testing is required for series connection and caller ID facilities.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. WARNING! The use of a shielded-type power cord is required in order to meet FCC emission limits and to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment.
Declaration of Conformity (R&TTE directive 1999/5/EC) The following items were completed and are considered relevant and sufficient: • Essential requirements as in [Article 3] • Protection requirements for health and safety as in [Article 3.1a] • Testing for electric safety according to [EN 60950] • Protection requirements for electromagnetic compatibility in [Article 3.
IC Radiation Exposure Statement for Canada This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with IC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance.
Déclaration d’Industrie Canada relative à l’ exposition aux ondes radio Cet appareil est conforme aux limites d’exposition aux radiations d’Industrie Canada définies pour un environnement non-contrôlé. Pour maintenir la conformité avec les exigences d’exposition RF d’IC, veuillez éviter tout contact direct avec l’antenne pendant l’émission. Les utilisateurs finaux doivent suivre les instructions de fonctionnement spécifiques pour satisfaire la conformité aux expositions RF.
Wireless Operation Channel for Different Domains N. America 2.412-2.462 GHz Ch01 through CH11 Japan 2.412-2.484 GHz Ch01 through Ch14 Europe ETSI 2.412-2.472 GHz Ch01 through Ch13 France Restricted Wireless Frequency Bands Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors are: • 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz) • 100mW for frequencies between 2446.5 MHz and 2483.
Departments in which the use of the 2400–2483.
UL Safety Notices Required for UL 1459 covering telecommunications (telephone) equipment intended to be electrically connected to a telecommunication network that has an operating voltage to ground that does not exceed 200V peak, 300V peak-to-peak, and 105V rms, and installed or used in accordance with the National Electrical Code (NFPA 70).
Power Safety Requirement Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power cords greater than or equal to: H05VV-F, 3G, 0.75mm2 or H05VV-F, 2G, 0.75mm2. TV Notices Note to CATV System Installer—Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.
Nordic Lithium Cautions (for lithium-ion batteries) CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. (English) ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato. Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla fabbrica. Non disperdere le batterie nell’ambiente.
Optical Drive Safety Information Laser Safety Information CD-ROM Drive Safety Warning CLASS 1 LASER PRODUCT WARNING! To prevent exposure to the optical drive’s laser, do not attempt to disassemble or repair the optical drive by yourself. For your safety, contact a professional technician for assistance. Service warning label WARNING! INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.
CTR 21 Approval (for Notebook PC with built-in Modem) Danish Dutch English Finnish French 110 Notebook PC E-Manual
German Greek Italian Portuguese Spanish Swedish Notebook PC E-Manual 111
ENERGY STAR complied product ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 15 and 30 minutes of user inactivity.
Global Environmental Regulation Compliance and Declaration ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements. Please refer to http://csr.asus.com/english/Compliance.
EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address, City: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR.
