Manual

4-22 Chapter 4: BIOS setup
4.5.4 APMConguration
RestoreonACPowerLoss[PowerOff]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system goes on after an AC power loss. When set to
[Last State], the system goes into either off or on state, whatever the system state
was before the AC power loss.
Conguration options: [Power Off] [Power On] [Last State]
Power on From S5 By PME# [Disabled]
Enables or disables PME wake from sleep states.
Conguration options: [Disabled] [Enabled]
Power on From S5 By Ring [Disabled]
Enables or disables ring to generate a wake event.
Conguration options: [Disabled] [Enabled]
PoweronByPS/2Keyboard[Disabled]
Enables or disables PS/2 Keyboard to generate a wake event.
Conguration options: [Disabled] [Space Bar] [Power Key] [Ctrl-Esc]
Power on From S5 By RTC Alarm [Disabled]
Enables or disables RTC to generate a wake event.
Conguration options: [Disabled] [Enabled]
APM Conguration
Restore on AC Power Loss [Power Off]
Power on From S5 By PME# [Disabled]
Power on From S5 By Ring [Disabled]
Power on By PS/2 Keyboard [Disabled]
Power on From S5 By RTC Alarm [Disabled]
Power off
Power On
Last State
Options