User Manual
3-3ASUS VA249 Series LCD Monitor
: the adjusting range is from 0 to 100. is a hotkey to
activate this function.
: the adjusting range is from 0 to 100.
: the adjusting range is from 0 to 100.
: contains four modes including Cool, Normal, Warm, and
User Mode.
: contains three color modes including Reddish, Natural, and
Yellowish.
In the User mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0-100.
Spl e ndi d
Blu e Li g ht Fil t er
Col o r
Ima g e
Inp u t S e le c t
Sys t em S et u p
VA2 4 9 NA
20
0
Fu ll
OF F
Sha rp ne ss
Tr ac e F re e
Asp ec t Co ntr ol
ASC R
Pos it io n
Fo cu s
AUT O Ad ju st.
MenuMove Exit
You can adjust Sharpness, Trace
Free, Aspect Control, ASCR,
Position (VGA only), Focus (VGA
only) and Auto Adjust. from this
menu.
: the adjusting
range is from 0 to 100.
: Adjusts the
response time of the monitor.
: adjusts the aspect ratio to “Full” or “4:3”.
: turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
: adjusts the horizontal position
(H-Position) and the vertical position (V-Position) of the image. The
adjusting range is from 0 to 100.
: reduces Horizonal-line noise
and Vertical-line noise of the image by adjusting (Phase) and (Clock)
separately. The adjusting range is from 0 to 100.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows
vertical stripes and the image is not proportional.