Serii VA24EHF Monitor LCD Podręcznik użytkownika
Spis treści TCO certified................................................................................................ iii Uwagi............................................................................................................ iv Informacje związane z bezpieczeństwem.................................................. vi Dbanie i czyszczenie................................................................................... ix Usługa odbioru zużytego sprzętu........................................
TCO certified A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Uwagi Oświadczenie Federalnej Komisji Łączności Urządzenie to jest zgodne z Częścią 15 przepisów FCC. Jego działanie wymaga spełnienia następujących dwóch warunków: • • Urządzenie to nie może powodować żadnych szkodliwych zakłóceń i Urządzenie to musi akceptować wszelkie odbierane zakłócenia, włącznie z zakłóceniami nieprzewidywalnymi. Urządzenie to zostało poddane testom, które określiły, że spełnia ograniczenia dla urządzeń cyfrowych klasy B, określone przez część 15 przepisów FCC.
Deklaracja zgodności Urządzenie to spełnia wymogi wynikające z Dyrektywy o ujednoliceniu prawa państw członkowskich dotyczącego kompatybilności elektromagnetycznej (2014/30/UE), Dyrektywy niskonapięciowej (2014/35/ UE), Dyrektywy ErP (2009/125/WE) oraz Dyrektywy RoHS (2011/65/UE). Produkt został poddany testom, które stwierdziły, że spełnia on normy zharmonizowane w zakresie urządzeń techniki informatycznej, które to normy zostały opublikowane w ramach dyrektyw w Oficjalnym Dzienniku Unii Europejskiej.
Informacje związane z bezpieczeństwem • • • • • • • • • • • • • • • • vi Przed wykonaniem ustawień monitora należy uważnie przeczytać całą, dostarczoną w opakowaniu dokumentację. Aby zapobiec pożarowi lub porażeniu prądem elektrycznym, nigdy nie należy narażać monitora na działanie deszczu lub wilgoci. Nigdy nie należy otwierać obudowy monitora. Niebezpieczne, wysokie napięcie wewnątrz monitora może spowodować poważne obrażenia fizyczne. W przypadku uszkodzenia zasilacza nie wolno naprawiać go samemu.
OSTRZEŻENIE Korzystanie ze słuchawek nausznych i dousznych innych niż określone w niniejszym dokumencie może być przyczyną utraty słuchu spowodowanej nadmiernym ciśnieniem akustycznym. Należy potwierdzić, że system dystrybucji w instalacji budynku powinien dostarczyć wyłącznik obwodu o parametrach znamionowych 120/240V, 20A (maksymalnie). Po dostarczeniu z 3-bolcową wtyczką na przewodzie zasilającym, podłącz przewód zasilający do uziemionego gniazda na 3-bolce.
Nadmierne ciśnienie akustyczne ze słuchawek dousznych i słuchawek nagłownych, może spowodować utratę słuchu. Regulacja korektora na maksymalne zwiększenie napięcia wyjścia słuchawek dousznych i słuchawek nagłownych, a przez to poziomu ciśnienia akustycznego. Oświadczenie dotyczące ograniczenia stosowania substancji niebezpiecznych (Indie) Urządzenie to jest zgodne z obowiązującymi w Indiach zasadami dot.
Dbanie i czyszczenie • Przed zmianą pozycji monitora zaleca się odłączenie kabli i przewodu zasilającego. Podczas zmiany pozycji monitora należy stosować właściwe techniki podnoszenia. Podczas podnoszenia lub przenoszenia należy chwycić za krawędzie monitora. Nie należy podnosić monitora za podstawę lub za przewód. • Czyszczenie. Wyłącz monitor i odłącz przewód zasilający. Oczyść powierzchnię monitora pozbawioną luźnych włókien, nie szorstką szmatką.
Gdzie można znaleźć więcej informacji W celu uzyskania dodatkowych informacji i aktualizacji produktu i oprogramowania, sprawdź następujące źródła. 1. Strony sieci web ASUS Ogólnoświatowe strony sieci web ASUS zapewniają zaktualizowane informacje o urządzeniach i oprogramowaniu firmy ASUS. Sprawdź http://www.asus.com 2. Opcjonalna dokumentacja Opakowanie z produktem może zawierać opcjonalną dokumentację, która mogła zostać dodana przez dostawcę. Te dokumenty nie są części standardowego opakowania.
1.1 Witamy! Dziękujemy za zakupienie monitora LCD ASUS®! Najnowszy szerokoekranowy monitor LCD ASUS zapewnia wyraźny, szerszy i jasny wyświetlacz, plus funkcje zwiększające doznania podczas oglądania. Dzięki tym funkcjom, można cieszyć się wygodnymi i wspaniałymi obrazami, jakie zapewnia monitor! 1.
1.3 Podłączanie monitora W celu podłączenia monitora 1. Umieść monitor ekranem w dół na miękkiej i gładkiej powierzchni, uważając, aby nie zarysować ani nie uszkodzić ekranu. Zamocuj/ wsuń kolumnę podstawy z monitorem, aż do jej zatrzaśnięcia na swoim miejscu. 2. Zepnij podstawę ze wspornikiem, a następnie chwyć je obiema rękami i włóż wspornik do pokrowca. Wyreguluj kąt nachylenia monitora, do najbardziej wygodnej pozycji.
1.4 Połączenia kabli 1.4.1 Tył monitora LCD 1. Port wejścia prądu zmiennego 2.
1.4.
1.5 Wprowadzenie do monitora 1.5.1 Używanie przycisku sterowania Użyj przycisku sterowania z tyłu monitora do regulacji ustawień obrazu. 1 2 3 4 5 1. 2. 3. 4. 5. Przycisk Menu/Zamknij OSD: • Naciśnij ten przycisk, aby przejść do menu OSD. • Wyjście z menu OSD. • Powrót do poprzedniego menu. • Przycisk skrótu blokady przycisków Przycisk Przejdź/Zamknij/Powrót: • Wyjście z menu OSD. • Przejdź do/wybierz podświetloną ikonę (funkcję), przy aktywnym menu OSD.
2.1 Odłączanie wspornika/podstawy (do montażu ściennego VESA) W celu odłączenia wspornika/podstawy 1. Odłącz kable zasilające i sygnałowe, ostrożnie połóż monitor przodem w dół, na czystym stole. 2. Jedną ręką naciśnij przycisk zwalniający osłonę, trzymając drugą ręką wspornik i pociągnij ją poziomo do tyłu. • Zalecamy przykrycie powierzchni stołu miękkim materiałem, aby zabezpieczyć monitor przed uszkodzeniem.
2.2 Regulacja monitora • Dla uzyskania optymalnego widzenia, zaleca się, aby spojrzeć na pełny ekran monitora, a następnie wyregulować monitor pod najbardziej wygodnym kątem. • Przytrzymaj podstawę, aby zabezpieczyć monitor przed upadkiem podczas zmiany jego kąta nachylenia. • Wyreguluj monitor zgodnie z ilustracjami, aby uzyskać najbardziej komfortowy dla siebie obraz. -5 O 23 O Podczas regulacji kąta widzenia monitor może lekko drgać, jest to normalne.
3.1 Menu OSD (menu ekranowe) 3.1.1 Jak wykonać ponowną konfigurację Splendid ASUS VA24E Tryb Standardowy HDMI 1920x1080 @ 100Hz Tryb Standardowy Tryb sRGB Tryb Sceneria Tryb Teatr Tryb Gra Tryb Widok nocny Tryb Odczytu Tryb Ciemni 1. Naciśnij przycisk MENU, aby uaktywnić menu OSD. 2. Naciśnij przyciski i w celu przełączenia pomiędzy opcjami w Menu. Po przesunięciu z jednej ikony na drugą, podświetlana jest nazwa opcji. 3. W celu wyboru podświetlonego elementu w menu, naciśnij przycisk . 4.
3.1.2 1. Wprowadzenie do funkcji OSD Splendid Ta funkcja zawiera osiem podfunkcji, które można wybrać według preferencji. Każdy tryb posiada opcję Wyzeruj, która umożliwia zachowanie ustawień lub powrót do trybu ustawień wstępnych.
2. Eye Care Eye Care ASUS VA24E Tryb Standardowy HDMI 1920x1080 @ 100Hz Filtr światła nieb. Przypom. o odpocz. Wzmocnienie koloru • Filtr światła nieb.: W tej funkcji, można wyregulować filtr światła niebieskiego 0 na wartość maksymalną 0: brak zmian;Maksymalna: Im wyższy poziom, tym mniej rozproszone jest niebieskie światło. Gdy jest uaktywniony filtr światła niebieskiego, automatycznie zaimportowane zostaną ustawienia domyślne pozycji Tryb Standardowy.
• Wzmocnienie koloru: Zakres regulacji wzmocnienia kolorów to 0 do 100. • 3. Ta funkcja nie jest dostępna w Tryb sRGB w opcji Splendid. Kolor Ta funkcja umożliwia wybór preferowanego koloru obrazu. Kolor ASUS VA24E Tryb Standardowy HDMI 1920x1080 @ 100Hz Jasność Kontrast Nasycenie Temp. barwowa • Jasność: Zakres regulacji wynosi 0 do 100. • Kontrast: Zakres regulacji wynosi 0 do 100. • Nasycenie: Zakres regulacji wynosi 0 do 100. • Temp.
4. Obraz Ta funkcja główna umożliwia regulację parametrów Wyrazistość, Trace Free, Kontrola proporcji, VividPixel, ASCR i Adaptive-Sync. Obraz ASUS VA24E Tryb Standardowy HDMI 1920x1080 @ 100Hz Wyrazistość Trace Free Kontrola proporcji ASCR Motion Sync Adaptive-Sync • Wyrazistość: Regulacja ostrości obrazu. Zakres regulacji wynosi 0 do 100. • Trace Free: Przyspieszenie czasu odpowiedzi poprzez użycie technologii Over Drive. Zakres regulacji wynosi od 0 (wolniejszy) do 100 (szybszy).
5. Ustawienia systemu Regulacja konfiguracji systemu. ASUS VA24E Tryb Standardowy HDMI 1920x1080 @ 100Hz Ustawienia systemu Splendid Demo Mode GamePlus QuickFit Oszczędzanie prądu Ustawienia OSD Język Blokada klawiszy Więcej ASUS VA24E Tryb Standardowy HDMI 1920x1080 @ 100Hz Ustawienia systemu Z powrotem Informacje Wskaźnik zasilania Blokada zasilania Wyzeruj wszystko ... • Splendid Demo Mode: Uaktywnienie trybu demo dla funkcji Splendid.
Menu główne GamePlus GamePlus GamePlus - Celownik GamePlus Celownik (Tryb ćwiczenia) Timer FPS Licznik FPS Wyrów. obrazu wyśw. GamePlus - Timer GamePlus GamePlus -FPS GamePlus FPS • QuickFit: zawiera trzy wzorce: (1) Siatka (2) Rozmiar papieru (3) Rozmiar zdjęcia. 1. Wzór siatki: Wspomaga projektantów i użytkowników w organizacji zawartości i układu na stronie i osiągnięciu spójnego wyglądu i odczucia.
Alignment Grid 1 2. Alignment Grid 2 Rozmiar papieru: Udostępnia użytkownikom widok ich dokumentów na ekranie w rozmiarze rzeczywistym. B5 Letter B5 Letter EXIT 3. Rozmiar zdjęć: Udostępnia fotografom i innym użytkownikom dokładny widok i edycję na ekranie zdjęć w rozmiarze rzeczywistym. 8x10 3-8 EXIT 5x7 4x6 3x5 2x2 • Oszczędzanie prądu: Zmniejsza zużycie energii. Domyślne ustawienie to “Głęboki poziom”.
6. • Z powrotem: Powrót do poprzedniej strony ustawień systemu. • Informacje: Wyświetlanie informacji o monitorze. • Wskaźnik zasilania: Włączenie/wyłączenie wskaźnika LED zasilania. • Blokada zasilania: Do wyłączania/włączania przycisku zasilania • Wyzeruj wszystko: Ustaw na „Tak”, aby przywrócić domyślny tryb fabryczny wszystkich ustawień. Skrót Wybór tej opcji, umożliwia ustawienie dwóch przycisków skrótu.
3.2 Specyfikacje Model VA24EHF Typ panela TFT LCD Wielkość panelu Maks. rozdzielczość Podziałka pikseli 0,2745 mm x 0,2745 mm Jasność (typowy) 250 cd/m2 Współczynnik kontrastu (typowy) 1300:1 Współczynnik kontrastu (maks.) 100.000.
Wymiary fizyczne bez podstawy (SxWxG) (do montażu ściennego VESA) 539,52mm x 323,15mm x 48,15mm Wymiary opakowania (SxWxG) 600,00mm x 448,00 x 125,00mm Masa netto (przybliżona) 2,84 kg Masa brutto (przybliżona) 4,31 kg Obsługa wielu języków 27 języków (Angielski, Uproszczony Chiński, Tradycyjny Chiński, Japoński, Rosyjski, Hiszpański, Włoski, Niemiecki, Francuski, Holenderski, Portugalski, Czeski, Chorwacki, Rumuński, Turecki, Arabski, Duński, Fiński, Grecki, Węgierski, Słowacki, Słoweński, Szwedzk
3.3 Rozwiązywanie problemów (FAQ) Problem Możliwe rozwiązanie WŁĄCZONA dioda LED zasilania • Naciśnij przycisk , aby sprawdzić, czy monitor znajduje się w trybie ON (WŁĄCZENIE). • Sprawdź, czy przewód zasilający jest prawidłowo podłączony do monitora i do gniazda zasilania. • Sprawdź funkcję Wskaźnik zasilania w głównym menu OSD. Wybierz „WŁ.” w celu włączenia diody LED zasilania.
3.
Taktowania SD/HD HDMI1.4, formaty CEA-861B, podstawowe obsługiwane taktowanie SD/HD (wyłącznie wejście HDMI) Częstotliwość Rozdzielczość Częstotliwość pozioma odświeżania 640 x 480 P 59,94/60Hz 31,469/31,5kHz 720 x 480 P 59,94/60Hz 31,469/31,5kHz 720 x 576 P 50Hz 31,25kHz 1280 x 720 P 50Hz 37,5kHz 1280 x 720 P 59,94/60Hz 44,955/45kHz HDMI1.