VA27ACFSN Series Nestekidenäyttö Käyttöopas
Sisällysluettelo TCO certified................................................................................................ iii Tiedoksiantoja.............................................................................................. iv Turvallisuustietoja........................................................................................ v Huolto ja puhdistus................................................................................... viii Takaisinottopalvelut...............................
TCO certified A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Tiedoksiantoja HUOMAA: Tämä monitori on ENERGY STAR -sertifioitu. Tämä tuote on tehtaan oletusasetuksissa ENERGY STAR -luokituksen mukainen. Tehdasasetukset voi palauttaa OSDvalikon "Factory Reset" (Tehdasasetukset) -toiminnolla. Tehtaan oletusasetusten muuttaminen tai muiden ominaisuuksien käyttöönotto voi lisätä virrankulutusta, mikä voi johtaa ENERGY STAR -luokituksessa määritettyjen rajojen ylittämiseen.
Turvallisuustietoja • Lue huolellisesti kaikki toimitukseen kuuluvat asiakirjat ennen näytön asettamista. • Estääksesi tulipalon tai sähköiskun vaaran älä koskaan altista näyttöä sateelle tai kosteudelle. • Älä koskaan yritä avata näytön koteloa. Näytön sisällä oleva vaarallisen korkea jännite voi johtaa vakavaan fyysiseen vammaan. • Jos virtalähde on rikkoutunut, älä yritä korjata sitä itse. Ota yhteys pätevään huoltoteknikkoon tai jälleenmyyjään.
VAROITUS Muiden kuin määritettyjen kuulokkeiden tai korvanappien käyttö voi johtaa kuulon menetykseen liiallisten äänenpaineiden vuoksi. Varmista, että rakennusasetuksen jakelujärjestelmässä on nimellisarvoltaan 120/240 V:n, 20 A:n (maksimi) sulake. Jos virtajohdossa on 3-napainen pistoke, liitä johto maadoitettuun 3-napaiseen pistorasiaan. Älä poista virtajohdon maadoitusnastaa pois käytöstä liittämällä esimerkiksi 2-napaisen sovittimen. Maadoitusnapa on tärkeä turvallisuusominaisuus. Vakausvaara.
Korvanappien ja kuulokkeiden liiallinen äänenpaine voi johtaa kulon menetykseen. Taajuuskorjaimen säätäminen maksimiin lisää korvanappien ja kuulokkien antojännitettä ja siksi äänenpaineen tasoa.
Huolto ja puhdistus • Ennen kuin nostat tai sijoitat näytön uuteen paikkaan, on parempi irrottaa kaapelit ja virtajohto. Sijoita näyttö uuteen paikkaan oikealla nostotekniikalla. Kun nostat tai kannat näyttöä, pidä kiinni näytön reunoista. Älä nosta näyttöä telineestä tai virtajohdosta. • Puhdistus. Sammuta näyttö ja irrota virtajohto. Puhdista näytön pinta nukkaamattomalla, hankaamattomalla liinalla. Piintyneet tahrat voi poistaa miedolla puhdistusaineliuoksella kostutetulla liinalla.
Lisätietojen saaminen Katso seuraavista lähteistä lisätietoja sekä tuote- ja ohjepäivityksiä. 1. ASUS-verkkosivustot ASUS-yrityksen maailmanlaajuiset verkkosivustot tarjoavat päivitettyjä tietoja ASUS-laitteisto ja -ohjelmistotuotteista. Katso http://www.asus.com 2. Valinnaiset asiakirjat Tuotteen pakkaus saattaa sisältää jälleenmyyjän lisäämiä valinnaisia asiakirjoja. Nämä asiakirjat eivät sisälly vakiopakkaukseen. 3.
1.1 Tervetuloa! Kiitos, kun ostit ASUS®-nestekidenäytön! Uusin ASUS-laajakuvanestekidenäyttö tarjoaa terävämmän, leveämmän ja kirkkaamman näytön sekä joukon ominaisuuksia, jotka parantavat katselukokemustasi. Näiden ominaisuuksien ansiosta pystyt nauttimaan näytön tarjoamasta käyttömukavuudesta ja ihastuttavasta visuaalisesta kokemuksesta. 1.
1.3 Monitorin kokoaminen Monitorin kokoaminen 1. Aseta näyttö liinalla pehmustetulle pöydälle, liitä sitten alusta varteen ja kiinnitä ruuvilla liittääksesi ne tiukasti. Voit kiristää ruuvin helposti sormin. 2. Säädä näyttö itsellesi sopivimpaan kulmaan.
1.4 Kaapelien liittäminen 1.4.1 Nestekidenäyttö takaa 9 1 2 3 1. Vaihtovirtapistorasia 2. HDMI-portti 3. DisplayPort 4. USB3.2 Gen1 Type-C -portti 5. USB3.2 Gen1 Type-A -portti 6. USB3.2 Gen1 Type-A -portti 7. RJ45-portti 8. Kuulokelähtö 9. Kensington-lukko 4 5 6 7 8 Tämä näyttö on Super-Speed USB 3.2 Gen 1 -yhteensopiva (5 Gbps).
Asennus 1. 2. 3. 4. 5. 6. Sammuta tietokone ja irrota tietokoneen virtajohto. Liitä signaalikaapeli joko monitorin HDMI- tai Type C - tai DPtuloliitäntään ja HDMI- Type C - tai DP näytönohjaimen tai tietokoneen tuloliitäntään. RJ45-porttien käyttö: Kun USB-ylävirtayhteys on muodostettu tietokoneen ja monitorin välille, liitä monitori tukiasemaan/reitittimeen RJ45-kaapelilla. Nyt voit käyttää internetiä. Liitä näytön virtakaapeli näytön takana olevaan virtaporttiin.
A B DisplayPort HDMI tai or USB USB Type-C Type-A RJ45 C Earphone • Katso vaihdettavissa olevien osien asennusohjeet yllä olevista asennusohjeista. • Käyttäjät voi siirtyä paikalliseen palveluverkkoon vaihtamaan/ostamaan hyväksyttyjä vaihdettavissa olevia osia. • Katso paikallisten huoltokeskusten yhteystiedot osoitteesta https://www.asus.
1.4.
1.5 Näytön johdanto 1.5.1 Ohjauspainikkeen käyttö Käytä näytön takana olevaa ohjauspainiketta kuva-asetusten säätämiseen. 5 2 Menu Exit Power Off 3 4 Input Select Blue Light Filter 6 1 1. Power Indicator (Virran merkkivalo): • 2. 5. 6. Kuvaus Valkoinen Päällä Keltainen Valmiustila Pois päältä Pois päältä Siirry OSD (Kuvaruutu) -valikkoon tätä painiketta painamalla. Vasen näppäin: • 4. Tila Keskipainike: • 3. Virran merkkivalon värimääritykset näkyvät alla olevasta taulukosta.
• Näppäinlukon pikavalintapainike. Pidä painettuna 5 sekuntia ottaaksesi näppäinlukon käyttöön / pois käytöstä. Voit painaa 5-suuntaista näppäintä mihin tahansa suuntaan kytkeäksesi monitorin päälle.
2.1 Varren/jalustan irrottaminen (VESAseinäkiinnitys) Tämän näytön irrotettava jalusta on suunniteltu erityisesti VESAseinäkiinnitystä varten. Varren/jalustan irrottaminen 1. Irrota virta- ja signaalikaapelit. Aseta varovasti näytön etupuoli puhdasta pöytätasoa vasten. 2. Poista neljä (4) ruuvia, jotka kiinnittävät varren näytön taakse. 3. Irrota jalusta (varsi ja alusta) näytöstä. • Suosittelemme, että peität pöydän pinnan pehmeällä kankaalla estääksesi näytön vahingoittumisen.
2.2 Näytön säätäminen • Suosittelemme optimaalisen katselukulman säätämistä varten, että katsot ensin pystysuorassa olevaa näyttöä ja säädät sen sitten itsellesi parhaiten sopivaan kulmaan. • Pidä kiinni jalustasta estääksesi näyttöä kaatumasta katselukulmaa vaihtaessasi. • Voit säätää monitorin kulmaa välillä +35 ˚ - -5 ˚ ja monitorin korkeutta +/- 15cm. Ennen näytön kiertämistä, nosta se yläasentoon ja paina se takaisin ääriasentoonsa.
3.1 Kuvaruutu (OSD) -valikko 3.1.1 Uudelleenmääritys Splendid ASUS VA27A Standard Mode DisplayPort 2560 x 1440 @ 100Hz Standard Mode sRGB Mode Scenery Mode Theater Mode Game Mode Night View Mode Reading Mode Darkroom Mode 1. Aktivoi kuvaruutuvalikko painamalla MENU (VALIKKO) -painiketta. 2. Paina - ja -painikkeita vaihtaaksesi valikkovalintojen välillä. Kun siirryt kuvakkeesta toiseen, valinnan nimi näkyy korostettuna. 3. Valitaksesi valikossa korostetun kohteen, paina Keskinäppäintä. 4.
3.1.2 1. Kuvaruutuvalikon johdanto Splendid Tämä toiminto sisältää kahdeksan alitoimintoa, joista voit valita tarpeesi mukaan. Kussakin tilassa on nollausvalinta, joka mahdollistaa asetuksesi säilyttämisen tai paluun esiasetettuun tilaan.
2. EyeCare EyeCare ASUS VA27A Standard Mode DisplayPort 2560 x 1440 @ 100Hz Blue Light Filter Rest Reminder Color Augmentation • Blue Light Filter (Sinisen valon suodatin): Tässä toiminnossa voit säätää sinisen valon suodatinta 0:sta maksimiin. 0: ei muutoksia; Maksimi: Mitä korkeampi arvo, sen vähemmän sinistä valoa siroaa. Kun sinisen valon suodatin on aktivoitu, Vakiotila -oletusasetukset tuodaan automaattisesti. Maksimitason lisäksi kirkkaus on käyttäjän määritettävissä.
• Color Augmentation (Värin lisäys): Värin lisäyksen säätöalue on 0–100. • 3. Tämä toiminto ei ole käytettävissä sRGB-tilassa Splendid-tilassa ollessa. Color (Väri) Valitse haluamasi kuvan väri tällä toiminnolla. Color ASUS VA27A Standard Mode DisplayPort 2560 x 1440 @ 100Hz Brightness Contrast Saturation Color Temp. • Brightness (Kirkkaus): Säätöalue on 0-100. • Contrast (Kontrasti): Säätöalue on 0-100. • Saturation (Värikylläisyys): Säätöalue on 0-100. • Color Temp.
4. Image (Kuva) Voit säätää kuvan Sharpness (Terävyys) -, Trace Free -, Aspect Control (Kuvasuhteen ohjaus) -, ASCR- , Motion Sync (Liikkeen synkronointi) - ja Adaptive-Sync-asetusta tästä päätoiminnosta. Image ASUS VA27A Standard Mode DisplayPort 2560 x 1440 @ 100Hz Sharpness Trace Free Aspect Control ASCR Motion Sync Adaptive-Sync • Sharpness (Terävyys): Säätää kuvan terävyyttä. Säätöalue on 0-100. • Trace Free: Nopeuttaa vasteaikaa Over Drive -teknologialla.
5. Input Select (Valitse tulo) Valitse tulolähde vaihtoehdoista HDMI, DisplayPort, USB Type-C, Auto Detection (Automaattinen tunnistus) -tulosignaali. ASUS VA27A Standard Mode DisplayPort 2560 x 1440 @ 100Hz Input Select HDMI DisplayPort USB Type-C Auto Detection 6. System Setup (Järjestelmän asetus) Säätää järjestelmän määrityksen.
• GamePlus: GamePlus-toiminto tarjoaa työkalusarjan ja luo paremman pelaamisympäristön käyttäjille eri tyyppisiä pelejä pelatessa. Etenkin Crosshair (Hiusristikko) -toiminto on suunniteltu erityisesti uusille pelaajille tai aloittelijoille, jotka ovat kiinnostuneita First Person Shooter (FPS) (Ensimmäisen persoonan ammunta) -peleistä. GamePlus-ominaisuuden aktivointi: • Paina GamePlus-painiketta siirtyäksesi GamePlus-päävalikkoon.
• QuickFit: sisältää kolme kuviota: (1) Ruudukko (2) Paperikoko (3) Valokuvakoko. 1. Ruudukkokuvio: Helpottaa suunnittelijoiden ja käyttäjien sisällön organisointia ja sivun asettelua yhdenmukaisen näkymän ja tunnun saavuttamista. Alignment Grid 1 2. Alignment Grid 2 Paperikoko: Antaa käyttäjien tarkastella asiakirjoja näytöllä reaalikokoisina. A4 A4 B5 Letter B5 Letter EXIT 3. Valokuvakoko: Antaa valokuvaajien ja muiden käyttäjien katsoa ja muokata tarkasti valokuvia näytöllä reaalikokoisina.
• • • • • • • • • • 7. USB-C Charging (USB-C-lataaminen): Aseta lataustehoksi 65 W tai 90 W. Kun 90 W on valittu, USB-keskitin ja Audiotoiminto on kytketty pois päältä. More (Lisää): Siirtää Järjestelmäasetusten seuraavalle sivulle. Back (Takaisin): Palauttaa Järjestelmäasetusten edelliselle sivulle. OSD Setup (OSD-asetus): Säädä OSD Timeout (OSD:n aikatkaisu) -, DDC/CI- ja OSD-näytön Transparency (Läpikuultavuus) -asetusta. Language (Kieli): Valitsee kuvaruutuvalikon kielen.
3.2 Tekniset tiedot Malli Paneelityyppi Paneelin koko Maksimiresoluutio Pikseliväli Kirkkaus (Tyyp.) TFT LCD 27” W 2560X1440 0,233 mm x 0,233 mm 350 cd/m2 Kontrastisuhde (Tyyp.) 1300:1 Kontrastisuhde (Maks.
VESA-seinäkiinnitys Kyllä (100 mm x 100 mm) Lämpötila (Käyttö) 0°C~ 40°C Käyttökosteus 10–80 % Korkeus Fyys. Mitat jalustan kanssa (LxKxS) 50.000 m (16.404 jalkaa) 613,97mm x (367,75mm~517,75mm) x 226,31mm Fyys.
3.3 Vianmääritys (Usein kysytyt kysymykset) Ongelma 3-12 Mahdollinen ratkaisu Virran merkkivalo ei pala • Paina -painiketta tarkistaaksesi onko näyttä ON (Päällä) -tilassa. • Tarkista onko virtajohto liitetty oikein näyttöön ja pistorasiaan. • Tarkista Virran merkkivalo -toiminto pää-OSDvalikossa. Valitse "PÄÄLLE" kytkeäksesi virran LED-merkkivalon päälle. Virran merkkivalo palaa keltaisena eikä näytössä näy kuvaa • Tarkista ovatko näyttö ja tietokone PÄÄLLÄ -tilassa.
3.
Videoajoitus 1920 x 1080 P @ 50 Hz V V V Videoajoitus 1920 x 1080 P @59,94/60 Hz V V V Videoajoitus 1920 x 1080 I @59,94/60 Hz V V V Videoajoitus 1920 x 1080 I @ 50 Hz V V V Videoajoitus 1440 x 480 I @59,94/60 Hz V V V Videoajoitus 1440 x 576 I @ 50 Hz V V V * Tilat, joita ei ole lueteltu yllä olevissa taulukoissa, eivät ehkä ole tuettuja. Optimaalisen tarkkuuden saavuttamiseksi suosittelemme valitsemaan tilan, joka on mainittu yllä olevissa taulukoissa.