User Guide

2-1ASUS VA27D Series LCD Monitor
2.1 Assembling the monitor arm/base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Attach the arm to the rear of the monitor (for selected models).
3. Attach the base into the arm, making sure the tab on the arm ts into the
groove on the base.
4. VA27DQ: Fix the base to the arm by rotating the base until it ts into place.
VA27DQSB / VA27DQSB-W: Fix the base to the arm by fastening the
bundled screw. Remove the stop screw at the bottom of the base to allow
180˚ swiwel adjustment from either left or right.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
VA27DQSB / VA27DQSB-W
VA27DQ
1
2
2
180°
1
2
1
2
1
1
2
(
For selected models
)
(
For selected models
)
Hinge screw size: M4 x 8 mm (VA27DQ).
Hinge screw size: M4 x 12 mm (VA27DQSB / VA27DQSB-W).
Base screw size: M6 x 16.5 mm (VA27DQSB / VA27DQSB-W).