User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- TCO certified
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
2-4 Chapter 2: Setup
2.3 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• VA27DQ: The recommended adjusting angle is +23 to -5˚.
• VA27DQSB / VA27DQSB-W: The recommended adjusting angle is +35˚ to -5˚
(for tilt)/+180˚ to -180˚ (for swiveling by removing the stop screw)/ +150 mm
(for height adjustment)/90˚ (for portrait view).
150mm
180° 180°
0°
-5°~+35°
-5°~+23°
VA27DQSB / VA27DQSB-W
VA27DQ
(Tilt)
(Swivel)
(Height adjustment)
Pivoting the monitor (VA27DQSB / VA27DQSB-W)
1. Lift the monitor to the highest position.
2. Tilt the monitor to its maximum angle.
3. Pivot the monitor to the angle you need.
0°
90°
-90°
0°
-5°~+35°