VA24DCP / VA27DCP LCD Monitor User Guide
First Edition January 2021 Copyright © 2021 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Contents....................................................................................................... iii Notices.......................................................................................................... iv Safety information....................................................................................... vi Care & Cleaning.......................................................................................... vii Takeback Services..................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
NOTE: Energy Star is NOT supported on FreeDOS and Linux-based operating system. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. This Class B digital apparatus meets all requirements of the Canadian Interference - Causing Equipment Regulations.
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded. This product is a better choice.
x
1.1 Welcome! Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a broader, brighter and crystal-clear display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you! 1.
1.3 Monitor introduction 1.3.1 Front view Menu Close Input Select Brightness Blue Light Filter 6 1. 4 3 2 1 Power button/power indicator • Turns the monitor on/off. • The color definition of the power indicator is as the below table. 2. Status Description White Amber Off On Standby mode Off Menu button: • Press this button to display the OSD menu when the OSD is off. • Enters the OSD menu. • Toggles the Key Lock function between on and off with a long press for 5 seconds. 3.
5. Shortcut • Press this button to display the OSD menu when the OSD is off. • Default: Brightness hotkey • To change the hotkey function, go to the Shortcut > Shortcut 1 menu. 6. Shortcut • Press this button to display the OSD menu when the OSD is off. • Default: Blue light filter hotkey • To change the hotkey function, go to the Shortcut > Shortcut 2 menu. 1.3.2 Back view 6 1 2 3 4 5 1. AC-IN port. This port connects the power cord. 2. HDMI port.
1-4 Chapter 1: Product introduction
2.1 Assembling the monitor arm/base To assemble the monitor base: 1. Have the front of the monitor face down on a table. 2. Attach the base into the arm, making sure the tab on the arm fits into the groove on the base. 3. Fix the base to the arm by rotating the base until it fits into place. We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
2.2 Detaching the arm/base (for VESA wall mount) The detachable arm/base of this monitor is specially designed for VESA wall mount. To detach the arm/base: 1. Have the front of the monitor face down on a table. 2. Remove the rubbers in the four screw holes. (Figure 1) 3. Remove the base (Figure 2). 4. Remove the hinge cover (Figure 3). 5. Use a screwdriver to remove the screw(s) on the hinge (Figure 4), then remove the hinge.
2.3 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • The recommended adjusting angle is +23 to -5˚.
2.4 Connecting the cables Connect the cables as the following instructions: • To connect the power cord: Connect one end of the power cord securely to the monitor’s AC input port, the other end to a power outlet. • To connect the HDMI/USB Type-C* cable: a. Plug one end of the HDMI/USB Type-C* cable to the monitor’s HDMI/ USB Type-C jack. b. Connect the other end of the HDMI/USB Type-C* cable to your computer's HDMI/USB Type-C jack.
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure Splendid Standard Mode ASUS VA24D HDMI 1920 x 1080 @ 60Hz S c e n e r y Mo d e S t a n d a r d Mo d e Th e a t e r Mo d e Ga me Mo d e N i g h t V i e w Mo d e s R G B Mo d e R e a d i n g Mo d e D a r k r o o m Mo d e 1. Press any button (except the Power button) to display the OSD menu. 2. Press the 3. Press the buttons as indicated on the screen to navigate through the functions. Highlight the desired function and press to activate it.
3.1.2 1. OSD function introduction Splendid This function contains 8 sub-functions you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode.
2. Eye Care In this function, you can adjust settings to better protect your eyes. Eye Care Standard Mode ASUS VA24D HDMI 1920 x 1080 @ 60Hz B l u e L i g h t Fi l t e r R e s t R e mi n d e r C o l o r A u g me n t a t i o n • Blue Light Filter: In this function, you can adjust the blue light filter from 0 to Max. * 0: No change. * Max: The higher the level, the less blue light is scattered. When blue light filter is activated, the default settings of Standard Mode will be automatically imported.
• Rest Reminder: This function provides you a rest reminder according to how long you set for your working time. For example, if you set a 30-minute working time and there will be a pop up reminder appeared on the upper left corner of the monitor for 5 seconds when time is up. Press any key to make this reminder OSD disappear. When this function is enabled, the following functions are not available: Splendid Demo Mode, GamePlus, QuickFit. • 3.
4. Image Set the image related setting from this menu. Image Standard Mode ASUS VA24D HDMI 1920 x 1080 @ 60Hz Sharpness Tr a c e Fr e e Aspect Control VividPixel ASCR A MD Fr e e S y n c • Sharpness: The adjusting range is from 0 to 100. • Trace Free: Adjusts the response time of the monitor. • Aspect Control: Adjusts the aspect ratio to full, 4:3, or OverScan. 4:3 is only available when input source is in 4:3 format. OverScan is only available for the HDMI input source.
5. Input Select In this function, you can select your desired input source. Input Select Standard Mode ASUS VA24D HDMI 1920 x 1080 @ 60Hz Standard Mode ASUS VA24D HDMI 1920 x 1080 @ 60Hz H D MI USB-C 6. System Setup Allows you to adjust the system. System Setup V o l u me S p l e n d i d D e mo Mo d e Ga me P l u s Qu i c k F i t E C O Mo d e Power Saving OS D S e t u p Mo r e 3-6 • Volume: The adjusting range is from 0 to 100.
GamePlus Main Menu GamePlus — Crosshair GamePlus FPS Crosshair FPS Counter Timer (Practice Mode) GamePlus — Timer GamePlus — Timer — Position Position GamePlus — FPS Counter — Position FPS Position • QuickFit: You can have a preview of the document or photo layout directly on screen without printing test copies. * Alignment: This facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel.
* Paper size: You can view the documents in real size on the screen. B5 Letter Letter B5 A4 (VA27DCP only) A4 * Photo: The various real photo sizes displayed provides photographers and other users to accurately view and edit their photos in real size on the screen. Photo 4x6, 3x5, 2x2 4x6 2x2 • ECO Mode: reduces power consumption.
• Key Lock: To disable all function keys. Press the second button from the right over five seconds to cancel the key lock function. • Information: Shows the monitor information. • Power Indicator: Turns the power LED indicator on/off. • Power Key Lock: Enables or disables the power key. • All Reset: “Yes” allows you to restore the default settings. Shortcut 7. Defines the functions for Shortcut 1 and 2 buttons.
3.2 Specifications summary Panel Type Panel size TFT LCD VA24DCP: 23.8” (16:9, 60.5 cm) wide screen Max. Resolution Pixel pitch VA27DCP: 27” (16:9, 68.6 cm) wide screen 1920 x 1080 VA24DCP: 0.2745 mm Brightness (Typ.) Contrast Ratio (Typ.) Contrast Ratio (Max.) Viewing angle (H/V) CR>10 Display colors Response time Splendid Video Enhancement Splendid selection Auto adjustment Color temperature selection Analog input Digital input Earphone jack Audio input Speaker (Built-in) USB 2.
Dimension (W x H x D) Weight (Esti.) Multi-languages Accessories Compliance and Standards VA24DCP: 539.7 x 390.41 x 205.01 mm (with stand) 539.7 x 323.55 x 52.6 mm (without stand) 612 x 455 x 152 mm (package) VA27DCP: 612 x 432 x 215 mm (with stand) 612 x 365 x 54 mm (without stand) 694 x 498 x 163 mm (package) VA24DCP: 3.7 kg (net without stand); 4 kg (net with stand); 5.5 kg (gross) VA27DCP: 5 kg (net without stand); 5.
3.3 Outline dimensions VA24DCP ASUS VA24DCP Outline Dimension Unit : mm [inch] 76.07 [2.99] 65.11 [2.56] 19.38 [0.76] 21.5° 3.5° 14.3 [0.56] 50.81 [2] 61.77 [2.43] 205.01 [8.07] 539.7 [21.25] 527.04 [20.75]-Active Area 204.99 [8.07] 17 [0.67] 17 [0.67] 17 [0.67] 263.52 [10.37] AA-Center 17 [0.67] 46.846 [1.84] 17 [0.67] 1.5 [0.06] 66.86 [2.63] 6.33 [0.25] 20.76 [0.82] 148.23 [5.84] 296.46 [11.67]-Active Area 323.55 [12.74] 390.41 [15.37] 52.08 [2.05] 52.6 [2.07] 100 [3.94] 87.08 [3.
VA27DCP ASUS VA27DCP Outline Dimension Unit: mm〔inch〕 77.9 [3.07] 65.29 [2.57] 19.9 [0.78] 21.5° 3.5° 14.28 [0.56] 50.71 [2] 63.33 [2.49] 215 [8.46] 597.89 [23.54] 611.9 [24.09] 215 [8.46] 298.94 [11.77] AA-Center 17 [0.67] 17 [0.67] 17 [0.67] 17 [0.67] 17 [0.67] 65.96 [2.6] 1.5 [0.06] 168.16 [6.62] 21.4 [0.84] 6.99 [0.28] 336.31 [13.24] 364.71 [14.36] 431.65 [16.99] 53.44 [2.1] 53.94 [2.12] 100 [3.94] 87.05 [3.43] 100 [3.
3.4 Troubleshooting (FAQ) Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. • Check if the power switch is ON. The power LED lights amber and there is • Check if the monitor and the computer are no screen image in the ON mode. • Make sure the signal cable is properly connected the monitor and the computer.
3.5 Supported operating modes VA24DCP Resolution Vertical Frequency (Hz) Horizontal Frequency (KHz) 640x480 59.94(N) 31.47(N) 640x480 66.66(N) 35.00(N) 640x480 72.82(N) 37.87(N) 640x480 75.00(N) 37.5(N) 720x400 70.08(P) 31.47(N) 800x600 56.25(P) 35.16(P) 800x600 60.32(P) 37.88(P) 800x600 72.12(P) 48.08(P) 800x600 75.00(P) 46.86(P) 49.72(P/N) 832X624 74.55(P/N) 1024x768 60.00(N) 48.36(N) 1024x768 70.069(N) 56.476(N) 1024x768 75.00(N) 60.02(N) 1152x864 75.
When the monitor is operating in the video mode (i.e., not displaying data), the following high definition modes shall be supported in addition to standard definition video. Preset Timing Name 1 2 3 4 5 6 480p 720p60 576p 720p50 1080p60 1080p50 Pixel Format Horizontal Frequency (kHz) 720 x 480 1280 x 720 720 x 576 1280 x 720 1920 x 1080 1920 x 1080 31.469 45 31.25 37.5 67.5 56.25 Vertical Frequency (Hz) 60 60 50 50 60 50 Pixel Rate (MHz) 27 74.25 27 74.25 148.5 148.
Resolution Frequency 1920x1080 Horizontal Frequency (KHz) 84.64(N) Vertical Frequency Pixel. (MHz) (Hz) 74.905(P) 220.75 *These timings are not supported when using OverScan function. “P” / “N” stands for “Positive” / “Negative” polarity of incoming H-sync/V-sync (input timing). When the monitor is operating in the video mode (i.e., not displaying data), the following high definition modes shall be supported in addition to standard definition video.
