User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
3-5ASUS VA24DQF / VA27DQF LCD Monitor
4. Image
Set the image related setting from this menu.
ASUS VA24DQF
Theater Mode DisplayPort 1920 x 1080 @ 60Hz
Sharpness
Trace Free
Aspect Control
ASCR
Motion Sync
Adaptive-Sync
Image
• Sharpness: The adjusting range is from 0 to 100.
• Trace Free: Adjusts the response time of the monitor.
• Aspect Control: Adjusts the aspect ratio to full, 4:3, or 1:1 Ratio.
• ASCR: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
• Motion Sync: Offers a more clear mode while displaying motion pictures.
Please note this function only works when the refresh rate is 100Hz. It
includes two modes: Normal Mode and Advanced Mode, which can
provide different effects.
• When this function is enabled, the system will automatically reduce the
brightness level.
• If the Adaptive-Sync is enabled, the Motion Sync function is grayed out.
• Adaptive-Sync: Allows a Adaptive-Sync supported* graphics source to
dynamically adjust display refresh rate based on typical content frame
rates for power efficient, virtually stutter free and low-latency display
update.
* Adaptive-Sync can only be activated within 48Hz ~ 100Hz.
* For supported GPUs, minimum PC system and driver requirements, please
contact the GPU manufactures.