Serie VA27ECE Monitor LCD Guía del usuario
Tabla de contenido Certificación TCO........................................................................................ iii Avisos........................................................................................................... iv Limpieza y mantenimiento.......................................................................... ix Servicios de recuperación........................................................................... x 1.1 ¡Bienvenido!............................................
Certificación TCO A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Avisos Declaración de la Comisión Federal de Comunicaciones (FCC, Federal Communications Commission) Este dispositivo cumple la Parte 15 de las Reglas de la FCC. Su funcionamiento está sujeto a dos condiciones: • Este dispositivo no puede causar interferencias perjudiciales. • Este dispositivo debe aceptar cualquier interferencia recibida, incluida la interferencia que pueda causar un funcionamiento no deseado.
Información de seguridad • Antes de instalar el monitor, lea atentamente toda la documentación incluida en el paquete. • Para evitar incendios o descargas eléctricas, no exponga el monitor a la lluvia ni a la humedad. • No abra la carcasa del monitor. En el interior del mismo hay componentes con voltaje alto y peligroso que puede provocar graves daños personales. • Si la fuente de alimentación se avería, no intente arreglarla usted mismo.
Declaración de conformidad Este dispositivo cumple los requisitos establecidos en la Directiva del Consejo sobre la aproximación de las leyes de los Estados miembros en relación con la compatibilidad electromagnética (2014/30/UE), la directiva de baja tensión (2014/35/UE), la directiva ErP (2009/125/EC) y la directiva RoHS (2011/65/UE).
ADVERTENCIA El uso de otros auriculares o audífonos que no sean los especificados puede producir pérdida de audición debido a las presiones de sonido excesivas. Por favor, confirme que el sistema de distribución en la instalación del edificio debe proporcionar el interruptor del circuito con una capacidad de 120/240 V, 20A (máximo). Si el cable de alimentación dispone de un enchufe de 3 clavijas, conéctelo a una toma de corriente de tres clavijas con conexión a tierra.
NUNCA coloque el producto sobre telas u otros materiales que puedan estar ubicados entre el producto y los muebles de soporte. NUNCA coloque elementos que puedan tentar a los niños a trepar, como juguetes y mandos a distancia, en la parte superior del producto o en los muebles sobre los que está colocado. Si el producto existente se va a retener y reubicar, se deben aplicar las mismas consideraciones que las anteriores.
Limpieza y mantenimiento • Antes de levantar o reparar el monitor, debe desconectar los cables y el cable de alimentación. Siga las técnicas correctas para levantar el monitor cuando lo coloque. Cuando levante o transporte el monitor, agárrelo por los bordes. No levante la pantalla por la base ni el cable de alimentación. • Limpieza. Apague el monitor y desenchufe el cable de alimentación. Limpie la superficie del monitor con un paño sin pelusas y no abrasivo.
Dónde encontrar más información Consulte las siguientes fuentes para obtener información adicional y las actualizaciones del software. 1. Sitios Web de ASUS Los sitios Web de ASUS en todo el mundo proporcionan información actualizada del hardware y los productos de software de ASUS. Consulte el sitio Web http://www.asus.com 2. Documentación opcional El paquete del producto puede incluir documentación opcional que puede haber agregado su distribuidor. Estos documentos no forman parte del paquete estándar.
1.1 ¡Bienvenido! ¡Gracias por adquirir el monitor LCD de ASUS®! Los monitores LCD panorámicos más modernos de ASUS proporcionan una visualización más nítida, clara y brillante, además de una gran cantidad de funciones que mejoran la experiencia de visualización. ¡Con estas funciones, disfrutará de la comodidad y la experiencia visual agradable que proporciona el monitor! 1.
1.3 Ensamblar el monitor Para ensamblar el monitor: 1. Coloque la pantalla plana sobre un paño encima de una mesa. A continuación, acople la base al brazo y fíjela con el tornillo para que ambas piezas queden firmemente unidas. Puede apretar fácilmente el tornillo con los dedos. 2. Ajuste el monitor con el ángulo que le resulte más cómodo.
1.4 Conectar los cables 1.4.1 Parte posterior del monitor LCD 5 HDMI 1 2 1. Puerto de entrada de CA 2. Puerto HDMI 3. Puerto Tipo-C 4. Salida de auriculares 5.
Instalación 1. Apague el equipo y desenchufe el cable de alimentación del mismo. 2. Conecte el cable de señal a la toma de entrada HDMI (opcional) y/o VGA (opcional) y/o DVI (opcional) del monitor y a la toma de salida HDMI (opcional) y/o VGA (opcional) y/o DVI (opcional) de la tarjeta gráfica del equipo. A continuación, apriete los tornillos del conector del cable de señal. 3. Inserte el cable de alimentación del monitor en el puerto de alimentación situado en la parte posterior de dicho monitor. 4.
1.4.2 • Las especificaciones del CABLE DE ALIMENTACIÓN se refieren a la página v. • Para la instalación de las piezas reemplazables, consulte las instrucciones de instalación anteriores. • Los usuarios pueden ir a la red de servicio local para reemplazar o comprar las piezas reemplazables aptas. • Para conocer los centros de servicio locales y los contactos de servicio, consulte el sitio web https://www.asus.com/support. Figura de seis lados UNIDAD: mm (pulgada) 15.00 mm LOGO 33.5*6.8 MM 33.
1.5 Presentación del monitor 1.5.1 Utilizar los botones de control Utilice los botones de control situados en la parte posterior del monitor para ajustar la configuración de la imagen. 1 2 3 4 5 1. 2. 3. 4. 5. Botón Menú/Cerrar: • Presione este botón para entrar en el menú OSD. • Salir del menú OSD. • Permite volver al menú anterior. • Botón de acceso directo de bloqueo de botones (*Nota1) Botón Cerrar/Volver: • Salir del menú OSD.
2.1 Desmontar el brazo y la base (para el soporte para pared VESA) El brazo desmontable de este monitor LCD está especialmente diseñado para soportes para pared VESA. Para desmontar el brazo y la base 1. Desconecte los cables de alimentación y señal. Coloque la parte frontal del monitor boca abajo y con cuidado sobre una mesa despejada. 2. Quite la base y el pedestal del monitor. • Es recomendable que cubra la superficie de la mesa con un paño suave para no dañar el monitor.
2.2 Ajustar el monitor • Para conseguir la mejor visualización posible, es recomendable mirar a toda la superficie del monitor y, a continuación, ajustarlo con el ángulo que le resulte más cómodo. • Sujete la base para impedir que el monitor se caiga cuando cambie su ángulo. • Puede ajustar el ángulo del monitor entre +23˚ y -5˚. -5 ~ 23 Es normal que el monitor tiemble ligeramente mientras ajusta el ángulo de visualización.
3.1 Menú en pantalla (OSD) 3.1.1 Cómo realizar la reconfiguración Splendid ASUS VA27ECE Modo Estándar HDMI 1080p 60Hz Modo Estándar Modo sRGB Modo Escenario Modo Cine Modo Juego Modo Noche Modo De Lectura Modo Sala Oscura 1. Pulse el botón Menú para activar el menú OSD. 2. Presione los botones y para alternar entre las opciones de Menú. A medida que pase de un icono a otro, el nombre de opción se resaltará. 3. Para seleccionar el elemento resaltado en el menú, presione el botón . 4.
3.1.2 1. Presentación de las funciones OSD Splendid Esta función contiene ocho funciones secundarias que puede seleccionar según sus preferencias. Cada modo tiene la opción Reiniciar que permite mantener la configuración o recuperar el modo preestablecido.
2. EyeCare Eye Care ASUS VA27ECE Modo Estándar HDMI 1080p 60Hz Filtro de luz azul Aviso de descanso Aumento de color • Filtro de luz azul: En esta función puede ajustar el filtro de luz azul de 0 al máximo. 0: sin cambios; Máx: Cuanto mayor sea el nivel, más luz azul se reducirá. Cuando la opción Filtro de luz azul está activada, la configuración predeterminada del modo estándar se importará automáticamente. Además del máximo nivel, el brillo se puede configurar por el usuario.
• 3. Aumento de color: El intervalo de aumento de color está comprendido entre 0 y 100. • Esta función no está disponible en modo sRGB: en Splendid. • Esta función no está disponible cuando se selecciona Rojizo o Amarillento en el menú de Tono de piel. Color Esta función permite seleccionar el color de la imagen que desea. Color ASUS VA27ECE Modo Estándar HDMI 1080p 60Hz Brillo Contraste Saturación Temp del color Tono de piel • Brillo: El intervalo de ajuste está comprendido entre 0 y 100.
4. Imagen Con esta función principal, puede ajustar las siguientes opciones de imagen: Nitidez, Trace Free, Controle de Aspecto, VividPixel, ASCR y FreeSync. Imagen ASUS VA27ECE Modo Estándar HDMI 1080p 60Hz Nitidez Trace Free Controle de Aspecto VividPixel ASCR FreeSync • Nitidez: Permite ajustar la nitidez de la imagen. El intervalo de ajuste está comprendido entre 0 y 100. • Trace Free: Permite acelerar el tiempo de respuesta mediante la tecnología Over Drive.
5. Selección de entrada Seleccione la fuente de entrada entre las siguientes señales de entrada: HDMI y USB Type-C. ASUS VA27ECE Modo Estándar HDMI 1080p 60Hz Selección de entrada HDMI USB Type-C 6. Config. Sistema Permite ajustar la configuración del sistema. ASUS VA27ECE Modo Estándar HDMI 1080p 60Hz Config. Sistema Splendid Demo Mode Volumen GamePlus QuickFit ECO Mode Carga USB Config. OSD Más ASUS VA27ECE Modo Estándar HDMI 1080p 60Hz Config.
• GamePlus: La función GamePlus proporciona un conjunto de herramientas y crea un entorno de juego mejorado para los usuarios cuando se reproducen diferentes tipos de juegos. Concretamente, la función Punto de mira está especialmente diseñada para jugadores nuevos y principiantes interesados en los juegos de disparo en primera persona (FPS, First Person Shooter). Para activar GamePlus: • Presione el botón GamePlus para entrar en el menú principal GamePlus.
Alignment Grid 1 2. Alignment Grid 2 Tamaño de papel: Permite a los usuarios ver sus documentos a tamaño real en la pantalla. A4 B5 Carta A4 B5 Letter EXIT 3. Tamaño de fotografía: Permite a los fotógrafos y otros usuarios ver y editar sus fotografías de forma precisa a tamaño real en la pantalla. 8x10 3-8 EXIT 5x7 4x6 3x5 2x2 • ECO Mode: permite activar el modo ecológico para ahorrar energía.
• Idioma: Permite seleccionar el idioma OSD. Las opciones disponibles son: Inglés, Francés, Alemán, Español, Italiano, Holandés, Ruso, Polaco, Checo, Croata, Húngaro, Rumano, Portugués, Turco, Chino simplificado, Chino tradicional, Japonés, Coreano, Persa, Tailandés e Indonesio. • Bloqueo de teclas: Permite deshabilitar todas las funciones de las teclas. Presione el primer botón de la derecha durante más de cinco segundos para deshabilitar la función de bloqueo de teclas.
7. Acceso directo Seleccione esta opción para establecer dos botones de acceso directo. Acceso directo ASUS VA27ECE Modo Estándar HDMI 1080p 60Hz Acceso directo 1 Acceso directo 2 3-10 • Acceso directo 1: El usuario puede seleccionar entre “Filtro de luz azul, Splendid, Brillo, Contraste, Selección de entrada, Temp del color, Volumen, QuickFit, GamePlus, Aviso de descanso, Aumento de color” y establecer una tecla de acceso directo. El ajuste predeterminado es selección de entrada.
3.2 Especificaciones Modelo Tamaño del panel VA27ECE 27” AN Resolución máxima 1920x1080 Brillo (típ.) 250 cd/m2 Relación de contraste intrínseco (típ.
3.3 Solucionar problemas (preguntas más frecuentes) Problema Solución posible El indicador LED de alimentación • Presione el botón para comprobar si el monitor no se ENCIENDE se encuentra en el modo ENCENDIDO. • Compruebe si el cable de alimentación está correctamente conectado al monitor y a la toma de corriente. • Compruebe la función Indicador de encendido en el menú principal OSD. Seleccione “ENCENDER” para iluminar el LED de alimentación.
3.
Tiempos SD/HD (solo entrada HDMI) HDMI 1.3, formatos CEA-861B, tiempo principales admitidos SD/HD (solo entrada HDMI) Resolución Tasa de actualización Frecuencia horizontal 640 x 480P 720x480P 720x576P 1280x720P 59,94 / 60Hz 59,94 / 60Hz 50Hz 50Hz 1280x720P 59,94 / 60Hz 31,469 / 31,5kHz 31,469 / 31,5kHz 31,25kHz 37,5kHz 44,955/45 kHz 1920 x 1080i 1920 x 1080i 50Hz 59,94 / 60Hz 28,125kHz 33,716 / 33,75kHz HDMI 1.