User Guide

1-4
Chapter 1: Product Introduction
Installaion
1. Turnoffyourcomputerandunplugyourcomputer'spowercord.
2. ConnectthesignalcabletotheHDMI(optional)and/orTypeC
(optional)and/orDP(optional)inputsocketofthemonitor,and
theHDMI(optional)and/orTypeC(optional)and/orDP(optional)
outputsocketofthegraphicscardonthecomputer.Thentightenthe
thumbscrewsonthesignalcableconnector.
3. TousetheRJ45port:AfterUSBupstreamconnectionisestablished
betweenthecomputerandthemonitor,useaRJ45cabletoconnect
themonitorwithanAP/router.YoucannowaccesstheInternet.
4. Insertthemonitorpowercableintothepowerportatthebackofthe
monitor.
5. Plugthepowercordsofyourcomputerandyourmonitorintoa
nearbyelectricaloutlet.
6. TousetheUSBupstream/downstreamfunction:
• Upstream:UseanUSBType-CcableandplugonendoftheType-c
connectortothemonitor'sUSB3.2Gen1Type-Cportas
upstreamandtheotherendtoyourcomputer'sUSBType-Cjack.
OruseanUSBType-CtoType-AcableandplugtheType-C
connectortothethemonitor'sUSB3.2Gen1Type-Cportas
upstreamandtheType-Aconnectortoyourcomputer'sUSB
Type-Ajack.Makesureyourcomputerisinstalledwiththelatest
Windows10/Windows11operatingsystem.
• Downstream:UseanUSBcabletoconnectyourdevicewiththe
monitor'sUSBTypeAjack.