VC279-SerieLCD-Monitor Anwenderhandbuch
Erste Ausgabe Januar 2015 Copyright © 2015 ASUSTeK COMPUTER INC. Alle Rechte vorbehalten. Kein Teil dieses Handbuchs sowie keine hierin beschriebenen Produkte und Programme dürfen ohne ausdrückliche schriftliche Genehmigung von ASUSTeK COMPUTER INC. (ASUS) vervielfältigt, übertragen, abgeschrieben, in einem Archivsystem abgelegt, in irgendeiner Form oder mit irgendeinem Werkzeug übersetzt werden; ausgenommen hiervon sind Kopien des Käufers für Sicherungszwecke.
Inhalt Hinweise....................................................................................................... iv Sicherheitshinweise..................................................................................... v Pflege und Reinigung.................................................................................. vi Rücknahmedienste..................................................................................... vii 1.1 Herzlich willkommen!..............................................
Hinweise FCC- (Federal Communications Commission-)Hinweis Dieses Gerät erfüllt Teil 15 der FCC-Bestimmungen. Der Betrieb unterliegt den folgenden zwei Voraussetzungen: • • Dieses Gerät darf keine Störungen verursachen. Dieses Gerät muss jegliche empfangenen Störungen hinnehmen, einschließlich Störungen, die zu unbeabsichtigem Betrieb führen können. Dieses Gerät wurde getestet und als mit den Grenzwerten für Digitalgeräte der Klasse B gemäß Teil 15 der FCC-Bestimmungen übereinstimmend befunden.
Sicherheitshinweise • • • • • • • • • • • • • • • • Es empfiehlt sich, vor dem Aufstellen des Monitors die mitgelieferte Dokumentation aufmerksam durchzulesen. Um Brände oder einen Stromschlag zu verhindern, darf der Monitor nicht Regen oder Feuchtigkeit ausgesetzt werden. Versuchen Sie nicht, das Monitorgehäuse zu öffnen. Die gefährliche Hochspannung im Geräteinnern kann zu schweren Verletzungen führen. Versuchen Sie nicht, das Netzteil selbst zu reparieren.
Pflege und Reinigung • Vor Hochheben oder Versetzen des Monitors sollten sämtliche Kabel herausgezogen werden. Halten Sie sich beim Aufstellen des Monitors an die Hinweise zum Anheben des Geräts. Fassen Sie das Gerät beim Heben oder Tragen an den Kanten, nicht am Fuß oder am Kabel. • Reinigung: Schalten Sie den Monitor aus und ziehen Sie das Stromkabel heraus. Reinigen Sie die Oberfläche mit einem fusselfreien, weichen Tuch.
Weitere Informationsquellen Folgende Informationsquellen liefern weitere Hinweise sowie Updates für Produkte und Software: 1. ASUS-Webseiten Die Web-Sites des Unternehmens für die einzelnen Länder liefern aktualisierte Informationen über Hardware und Software von ASUS. Die allgemeine Web-Site: http://www.asus.com 2. Optionale Dokumentation Das Gerätepaket enthält u. U. vom Händler beigelegte Zusatzdokumentation. Diese ist nicht Teil des Standardpakets.
1.1 Herzlich willkommen! Besten Dank, dass Sie einen ASUS® LCD-Monitor gekauft haben! Dieser neueste Widescreen LCD-Monitor von ASUS verfügt über ein schärferes, breiteres und helleres Display als seine Vorgänger plus eine Reihe von Funktionen, die das Arbeiten mit dem Gerät noch angenehmer und die Darstellung noch natürlicher machen. Diese Funktionen sorgen für optimale, augenfreundliche und brillante Bildwiedergabe am Monitor! 1.
1.3 Zusammenbau des Monitorfußes 1. Legen Sie den Monitor mit der Bildfläche nach unten auf einen Tisch. 2. Bringen Sie die die Basis am Arm an. 3. Drehen Sie die Schraube zur Sicherung der Basis mit Hilfe einer Münze im Uhrzeigersinn fest. Stellen Sie dann einen für Sie bequemen Neigungswinkel ein. •• 1-2 Um Schäden am Monitor zu verhindern, sollte der Tisch mit einem weichen Tuch bedeckt werden.
1.4 Anschließen der Kabel 1.4.1 Geräterückseite VC279N-W 100 mm 100 mm HDMI DVI VGA 1 3 4 DVI VGA 6 7 VC279H 100 mm 100 mm HDMI 1 VGA 2 HDMI 4 DVI 5 2 DVI VGA 6 7 3 8 1. Bedientasten 5. HDMI-Anschluss 2. Lautsprecher 6. DVI-Anschluss 3. Kensington-Schloss 7. VGA-Anschluss 4. Netzeingang 8.
1.5 Einführung 1.5.1 Bedientasten verwenden Passen Sie die Bildeinstellungen mit den Bedientasten an der Monitorrückseite an. Berühren Sie die Taste 1 bis 6 zum Aktivieren der Tastenlistenseite. Auto Standardmodus Standardmodus VGA 1920 x 1080 @ 60Hz VGA 1920 x 1080 @ 60Hz Menü Menü QuickFit QuickFit Auto-Einstellung Eingangswahl Schließen Schließen GamePlus Helligkeit Blaulichtfilter Blaulichtfilter Auto 1 2 3 4 5 6 1 2 3 4 5 6 1 7 VC279N-W 1.
5. QuickFit-Taste: • Dies ist eine Schnelltaste zum Aktivieren der zur Ausrichtung entwickelten QuickFit-Funktion. • Die QuickFit-Funktion enthält 5 Seiten allgemeiner Gittermuster, Papiergrößen und Fotogrößen. Einzelheiten finden Sie auf Seite 1-6. 6. Menütaste: • 7. Zum Aufrufen des OSD-Menüs. Ein-/Austaste / Betriebsanzeige: • Taste zum Ein- und Ausschalten des Geräts.
1.5.2 QuickFit-Funktion Die QuickFit-Funktion enthält drei Muster: (1) Gitter (2) Papiergröße (3) Fotogröße. QuickFit hat drei Muster: 1. Gittermuster: Vereinfacht Designern und Nutzern das Organisieren von Inhalten und Layout auf einer Seite und die Erzielung eines einheitlichen Aussehens und Gefühls. Alignment Grid 2. Papiergröße: Ermöglicht Nutzern die Anzeige ihrer Dokumente in realer Größe am Bildschirm. A4 Letter A4 Letter EXIT 3.
2.1 Abnehmen der Basis (für VESAWandmontage) Gehen Sie zum Abnehmen der Basis wie folgt vor: 1. Trennen Sie Stromversorgungs- und Signalkabel. Legen Sie den Monitor mit der Bildfläche nach unten vorsichtig auf einen sauberen Tisch. 2. Drehen Sie die Schraube an der Unterseite der Basis mit Hilfe einer Münze zum Lösen gegen den Uhrzeigersinn. 3. Entfernen Sie die Basis vom Ständer. 4. Entfernen Sie die Ständerabdeckung. Lösen Sie dann die 4 Schrauben zum Abnehmen des Ständers. 5.
2.2 Einstellen des Monitors • Für eine optimale Draufsicht sollten Sie direkt auf das Display schauen und dabei den Neigungswinkel des Monitors so einstellen, dass Sie das Display bequem ansehen können. • Halten Sie während des Einstellens des Winkels den Monitorfuß fest. • Möglich sind Neigungswinkel zwischen -5˚ und 20˚. -5˚ to +20˚ •• Es ist normal, dass der Monitor leicht wackelt, während Sie den Betrachtungswinkel anpassen.
3.1 OSD- (On-Screen Display-) Menü 3.1.1 Konfiguration Standardmodus Splendid Landschaftsmodus Blaulichtfilter Standardmodus Farbe Theatermodus Bildeinrichtung Spielmodus Eingangswahl Nachtmodus System-Einstellungen sRGBmodus Verknüpfung Lesemodus VGA 1920 x 1080 @ 60Hz Dunkelkammer-Modus 1. Blenden Sie das OSD-Menü mit der MENU-Taste ein. 2. Drücken Sie zum Umschalten zwischen den Menüoptionen die Tasten und .
3.1.2 1. OSD-Funktionen: Einführung Splendid Diese Funktion enthält 8 Optionen, die Sie nach Bedarf einstellen können. Alle Modi verfügen über eine Funktion zum Zurücksetzen, d. h., Sie können die Einstellung beibehalten oder zum vordefinierten Modus zurückkehren.
• • • 2. Im Standardmodus können die Funktionen Sättigung, Hautton, Schärfe und ASCR nicht vom Nutzer konfiguriert werden. Im sRGBmodus können die Funktionen Sättigung, Farbtemp., Hautton, Schärfe, Helligkeit, Kontrast und ASCR nicht vom Nutzer konfiguriert werden. Im Lesemodus können die Funktionen Sättigung, Hautton, ASCR, Kontrast und Farbtemp. nicht vom Nutzer konfiguriert werden. Blaulichtfilter Verringern Sie die Intensität des von der LED-Hintergrundbeleuchtung abgegebenen blauen Lichts.
3. Farbe Mit dieser Funktion wählen Sie die gewünschte Bildfarbe. Standardmodus Splendid Helligkeit Blaulichtfilter Kontrast Farbe Sättigung Bildeinrichtung Farbtemp. Eingangswahl Hautton VGA 1920 x 1080 @ 60Hz System-Einstellungen Verknüpfung • Helligkeit: Zum Anpassen der Helligkeit. Möglich sind Werte zwischen 0 und 100. • Kontrast: Zum Anpassen des Kontrasts. Möglich sind Werte zwischen 0 und 100. • Sättigung: Zum Anpassen der Sättigung. Möglich sind Werte zwischen 0 und 100.
4. Bildeinrichtung Über diese Hauptfunktion können Sie Schärfe, Kontrollen, VividPixel, ASCR, Position, Fokus und Auto-Einstellung anpassen. Standardmodus Schärfe Blaulichtfilter Kontrollen Farbe VividPixel Bildeinrichtung ASCR Eingangswahl Position System-Einstellungen Fokus Verknüpfung Auto-Einstellung • Schärfe: Zum Einstellen der Bildschärfe. Möglich sind Werte zwischen 0 und 100. • Kontrollen: Passen Sie das Seitenverhältnis auf „Vollbild“ oder „4:3“ an.
5. Eingangsauswahl Zum Auswählen der Eingangsquelle.
6. System-Einstellungen Zum Einstellen der Systemkonfiguration.
VC279H Splendid Splendid Demo Mode Blaulichtfilter Lautstärke Farbe GamePlus Bildeinrichtung ECO Mode Eingangswahl OSD-Einstellungen System-Einstellungen Sprache Verknüpfung Tastensperre Standardmodus VGA 1920 x 1080 @ 60Hz Standardmodus VGA 1920 x 1080 @ 60Hz Mehr (Seite 1/2) Splendid Zurück Blaulichtfilter Information Farbe Betriebsanzeige Bildeinrichtung Ein-/Austaste-Sperre Eingangswahl Fabrikseinst System-Einstellungen Verknüpfung (Seite 2/2) • Splendid Demo Mode (Demo
So aktivieren Sie GamePlus: • Wählen Sie zum Aufrufen des GamePlus-Hauptmenüs EIN. • Drücken Sie zur Auswahl zwischen Fadenkreuz- und TimerFunktion oder . • Bestätigen Sie die gewählte Funktion mit . Drücken Sie zum Zurückkehren . Drücken Sie zum Abschalten und Verlassen . GamePlus-Hauptmenü GamePlus – Fadenkreuz GamePlus Fadenkreuz Timer (Übungsmodus) GamePlus – Timer GamePlus – Timer – Position Position • • • • • • • • • • 3-9 ECO Mode: Zum Aktivieren des Ökomodus zum Energiesparen.
7. Verknüpfung Weisen Sie den beiden Schnelltasten spezifische Funktionen zu. VC279N-W Standardmodus Splendid Verknüpfung 1 Splendid Blaulichtfilter Verknüpfung 2 Helligkeit VGA 1920 x 1080 @ 60Hz Farbe Auto-Einstellung Bildeinrichtung Kontrast Eingangswahl Farbtemp.
VC279H Standardmodus Splendid Verknüpfung 1 Splendid Blaulichtfilter Verknüpfung 2 Helligkeit VGA 1920 x 1080 @ 60Hz Farbe Auto-Einstellung Bildeinrichtung Kontrast Eingangswahl Farbtemp. System-Einstellungen Lautstärke Verknüpfung GamePlus Blaulichtfilter (Verknüpfung 1) Standardmodus Splendid Verknüpfung 1 Splendid Blaulichtfilter Verknüpfung 2 Helligkeit VGA 1920 x 1080 @ 60Hz Farbe Auto-Einstellung Bildeinrichtung Kontrast Eingangswahl Farbtemp.
3.2 Technische Daten Modell VC279N-W VC279H Display-Größe 27-Zoll-Diagonale (aktiver Anzeigebereich von 597,9 (H) x 336,3 (V) mm) Max. Auflösung 1920 x 1080 Helligkeit (typ.) 250 cd/m2 Kontrastverhältnis (typ.) 1000:1 Betrachtungswinkel (CR ≤ 10) 178 ° (V); 178 ° (H) Anzeigefarben 16,7M Farben (6 Bit + FRC-Erweiterung) 5 ms (GtG) Reaktionszeit (typ.
3.3 Problembeseitigung (FAQ) Problem Strom-LED leuchtet NICHT Lösungsvorschlag • Drücken Sie , um festzustellen, ob der Monitor eingeschaltet ist. • Überprüfen Sie, ob das Stromkabel richtig am Monitor und der Wandsteckdose eingesteckt ist. • Prüfen Sie die Betriebsanzeige-Funktion im OSDHauptmenü. Wählen Sie zum Einschalten der Betriebs-LED „EIN“. Die Betriebs-LED leuchtet bernsteinfarben, doch auf dem Display ist nichts zu sehen. • Überprüfen Sie, ob PC und Monitor eingeschaltet sind.
3.