VivoPC VC60 Series User Manual
E8609 First Edition August 2013 COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents About this manual.............................................................................................. 4 Conventions used in this manual................................................................ 4 Typography.......................................................................................................... 4 Package contents................................................................................................ 5 Getting to know your VivoPC 7 Features...............
About this manual This manual provides information about the hardware and software features of your VivoPC, organized through the following chapters: Chapter 1: Getting to know your VivoPC This chapter details the hardware components of your VivoPC. Chapter 2: Using your VivoPC This chapter provides you with information on using your VivoPC. Chapter 3: Mounting your VivoPC This chapter provides you with information on how to mount your VivoPC to a VESA mount-compatible device.
Package contents Your VivoPC package contains the following items: Driver DVD* VivoPC VC60 Series AC power adapter Power cable 4 pcs. 8mm screws for VESA mounting plate mini DisplayPort to VGA adapter* Technical documentations VESA mounting plate 2 pcs. 12mm screws 4 pcs. rubber heads for VESA mounting plate NOTES: • Actual product specifications may vary with territories.
VivoPC VC60 Series
1 Getting to know your VivoPC
Features Front Drive activity indicator This indicator lights up when your VivoPC is accessing the internal storage drive.
Left side Air vents The air vents on the left side allows cooler air to enter your VivoPC chassis. IMPORTANT: For an optimum heat dissipation and air ventilation, ensure that the air vents are free from obstructions.
Rear Power button The power button allows you to turn the VivoPC on or off. You can also use the power button to put your VivoPC to sleep mode. Memory card slot The built-in memory card reader enables your PC to read and write data to and from MMC/SD cards. Kensington security slot The Kensington security slot allows you to secure your VivoPC using Kensington® security products. USB 3.0 ports These USB (Universal Serial Bus) 3.
Serial (COM) connector The 9-pin serial (COM) connector allows you to connect devices that have serial ports such as mouse, modem, or printers. LAN port The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network. Headphone/Audio Out jack The stereo headphone jack is used to connect the system’s audio out signal to amplified speakers or headphones.
Rear air vents The air vents on the rear allow warm air to exit the VivoPC. IMPORTANT: For an optimum heat dissipation and air ventilation, keep the air vents at least 10cm away from any obstructions. Power input (DC 19V) The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the PC. To prevent damage to the PC, always use the supplied power adapter. WARNING! The power adapter may become warm to hot when in use.
Using your VivoPC 2
Getting started Connect the AC power adapter to your VivoPC To connect the AC power adapter to your VivoPC: A. Connect the AC power cord to the AC/DC adapter. B. Plug the AC power cord into a 100V~240V power source. C. Connect the DC power connector into your VivoPC’s power (DC) input port. NOTE: The power adapter may vary in appearance, depending on models and your region.
IMPORTANT! • We strongly recommend that you use only the AC power adapter and cable that came with your VivoPC. • We strongly recommend that you use a grounded wall socket while using your VivoPC. • The socket outlet must be easily accessible and near your VivoPC. • To disconnect your VivoPC from its main power supply, unplug your VivoPC from the power socket. NOTE: Power adapter information: • Input voltage: 100-240Vac • Input frequency: 50-60Hz • Rating output current: 3.
Connect a display panel to your VivoPC You can connect a display panel or projector to your VivoPC that has the following connectors: • HDMI connector • Mini DisplayPort • VGA connector (use with a mini DisplayPort to VGA adapter) • DVI connector (use with an HDMI to DVI adapter or VGA to DVI adapter) NOTES: 16 • The HDMI to DVI adapter and VGA to DVI adapter are sold separately. • The availability of the mini DisplayPort to VGA adapter varies with your VivoPC package.
To connect a display panel to your VivoPC: Connect a display cable either to the HDMI port or the mini DiplayPort.
Connect the USB cable from keyboard or mouse You can connect generally any USB keyboard and mouse to your VivoPC. You can also connect a USB dongle for a wireless keyboard and mouse set. To connect a keyboard and mouse to your VivoPC: Connect the USB cable from your keyboard and mouse to the USB 2.0 ports of your VivoPC. Connect keyboard or mouse via USB 2.
Turn on your Vivo PC Press the power button to turn on your VivoPC.
Turning your VivoPC off If your VivoPC is unresponsive, press and hold the power button for at least four (4) seconds until your VivoPC turns off. Putting your VivoPC to sleep To put your VivoPC on Sleep mode, press the Power button once. Entering the BIOS Setup BIOS (Basic Input and Output System) stores system hardware settings that are needed for system startup in the VivoPC. In normal circumstances, the default BIOS settings apply to most conditions to ensure optimal performance.
Quickly enter the BIOS To quickly enter the BIOS: • Press the power button for at least four (4) seconds to shut down your VivoPC, then press the power button again to turn your VivoPC back on, then press or during POST. • When your PC is off, disconnect the power cord from your VivoPC’s power connector. Reconnect the power cable and press the power button to turn on your VivoPC. Press or during POST.
Mounting your VivoPC 3
Installing your VivoPC to a VESA mount-compatible device Your VivoPC package has a bundled VESA mounting plate that allows you to install your VivoPC to a VESA mount-compatible device. To install your VivoPC to a VESA mount-compatible device: 1. Place your VivoPC upside down on a flat and stable surface. 2. Attach the bundled two (2) 12mm screws into the screw holes at the bottom of your VivoPC. WARNING! Do not overtighten the screws as it may cause damage to your VivoPC. 3.
4. Remove the screw hole covers at the back of your VESA mountcompatible device, if any. 5. With the arrow on the VESA mounting plate pointing upward, align its screw holes to the screw holes of the VESA mountcompatible device. 6. Secure the VESA mounting plate to the VESA mount-compatible device using the screws with the rubber heads. WARNING! Do not overtighten the screws as it may cause damage to your VESA mount-compatible device.
7. Insert the screws attached on the VivoPC to the mounting holes of the VESA mounting plate, then gently push the VivoPC down to secure it in place.
Appendix
Safety information Your VivoPC is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system • • • • • • Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source. Set up the system on a stable surface. Openings on the chassis are for ventilation.
Lithium-Ion Battery Warning CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. NO DISASSEMBLY The warranty does not apply to the products that have been disassembled by users DO NOT throw the VivoPC in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
Regulatory notices REACH Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment.
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
France Restricted Wireless Frequency Bands Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors are: • • 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz) 100mW for frequencies between 2446.5 MHz and 2483.5 MHz NOTE: Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5 MHz.
This requirement is likely to change over time, allowing you to use your wireless LAN card in more areas within France. Please check with ART for the latest information (www.art-telecom.fr) NOTE: Your WLAN Card transmits less than 100mW, but more than 10mW. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
CE Mark Warning CE marking for devices without wireless LAN/Bluetooth The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”.
ENERGY STAR complied product ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 15 and 30 minutes of user inactivity.
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax E-mail Web site Technical Support Telephone Online support 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 +886-2-2894-3447 +886-2-2890-7798 info@asus.com.tw www.asus.com.tw +86-21-38429911 support.asus.
DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Asus Computer International Responsible Party Name: 800 Corporate Way, Fremont, CA 94539. Address: Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : VivoPC Model Number : VC60,VC60V Conforms to the following specifications: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: This device complies with part 15 of the FCC Rules.
EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address, City: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR.
