User guide

2-2 Chapter2:Setup
2.3 Detaching the arm/base
(for VESA wall mount)
Thedetachablearm/baseofthisLCDmonitorisspeciallydesignedforVESAwall
mount.
Todetachthearm/base:
1. Havethefrontofthemonitorfacedownonatable.
2. Removetherubbersinthefourscrewholes(Figure1).
3. Useascrewdrivertoremovethetwoscrewsonthearm(Figure2),thenslide
outthearm/basetodetachitfromthemonitor(Figure2).
1
Rele ase Loc k



 
2
1
Relea se Lock
We recommend that you cover the table surface with soft cloth to prevent
damagetothemonitor.