User Guide

3-15ASUSVE247/VE248/VE249SeriesLCDMonitor
3.3 Troubleshooting (FAQ)
 
PowerLEDisnotON
• Pressthe buttontocheckifthemonitor
isintheONmode.
• Checkifthepowercordisproperly
connectedtothemonitorandthepower
outlet.
ThepowerLEDlightsamberandthereis
noscreenimage
• Checkifthemonitorandthecomputerare
intheONmode.
• Makesurethesignalcableisproperly
connectedthemonitorandthecomputer.
• Inspectthesignalcableandmakesure
noneofthepinsarebent.
• Connectthecomputerwithanother
availablemonitortocheckifthecomputer
isproperlyworking.
Screenimageistoolightordark • AdjusttheContrastandBrightness
settingsviaOSD.
Screenimageisnotcenteredorsized
properly
• Pressthe or buttonfortwo
secondstoautomaticallyadjusttheimage.
(forVGAmodeonly)
• AdjusttheH-PositionorV-Position
settingsviaOSD.
Screenimagebouncesorawavepatternis
presentintheimage
• Makesurethesignalcableisproperly
connectedtothemonitorandthe
computer.
• Moveelectricaldevicesthatmaycause
electricalinterference.
Screenimagehascolordefects(whitedoes
notlookwhite)
• Inspectthesignalcableandmakesure
thatnoneofthepinsarebent.
• PerformResetviaOSD.
• AdjusttheR/G/Bcolorsettingsorselect
theColorTemperatureviaOSD.
Screenimageisblurryorfuzzy
• Pressthe or buttonfortwo
secondstoautomaticallyadjusttheimage
(forVGAmodeonly).
• AdjustthePhaseandClocksettingsvia
OSD.
Nosoundorsoundislow • Ensurethattheaudiocableisproperly
connectedtothemonitorandthe
computer.
• Adjustthevolumesettingsofbothyour
monitorandcomputer.
• Ensurethatthecomputersoundcard
driverisproperlyinstalledandactivated.