User Guide

2-3ASUS VG248QE Series LCD Monitor
 : connect one end of the power cord securely to
the monitor’s AC input, the other end to a power outlet.
 :
a. Plug one end of the DVI/HDMI/DisplayPort cable to the monitor’s DVI/
HDMI/DisplayPort port.
b. Connect the other end of the DVI/HDMI/DisplayPort cable to your
computer's DVI/HDMI/DisplayPort port.
c. Tighten the two screws to secure the DVI connector.
 connect one end of the audio cable to the
monitor’s Audio-in port, the other end to the computer’s audio-out port.
 
: connect the end with plug type to the monitor’s earphone jack.
When these cables are connected, you can choose the desired signal from the
Input Select item in the OSD menu.
2.5 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in blue to show that the monitor is ON.