Manualshelf

Installation guide

ManualsBrandsAsus ManualsMonitorVG248QE
12345678910
G-SYNC INSTALLATION GUIDE VER. 2.0 | Page 14 G-SYNC INSTALLATION GUIDE VER. 2.0 | Page 15
10. Fold back the metal shielding.
Peel back the metal shielding tape as shown.
Note: Keep the metal shielding tape attached to the LCD
panel for later re-assembly.
11. Disconnect the backlight cable.
Gently pull out the backlight cable.
12. Fold back the metal shielding tape from other three sides.
Fold back the metal shielding tape from the other three sides of the chassis.
Keep the metal shielding tape connected to the LCD panel.
13. Separate the chassis from the LCD panel.
Lift the electronics chassis off the LCD panel.
Note: Set aside the LCD panel for later reassembly.