Monitor LCD VG248 series Uporabniški priročnik
Prva izdaja November 2012 Copyright © 2012 ASUSTeK COMPUTER INC. Vse pravice pridržane. Nobenega dela tega priročnika, vključno z opisanimi izdelki in programsko opremo, ni dovoljeno kopirati, prenašati, prepisovati, shranjevati v sistem za pridobivanje ali prevajati v kateri koli jezik v kakršni koli obliki in s kakršnimi koli sredstvi, z izjemo dokumentacije, ki jo kupec hrani za namene varnostnega kopiranja, brez izrecnega pisnega dovoljenja družbe ASUSTeK COMPUTER INC. (»ASUS«).
Kazalo Opombe........................................................................................................ iv Varnostne informacije.................................................................................. v Vzdrževanje in čiščenje............................................................................... vi Takeback Services...................................................................................... vii 1. poglavje: Predstavitev izdelka 1.1 Pozdravljeni! ............
Opombe Izjava zvezne komisije za telekomunikacije FCC (Federal Communications Commission) Ta naprava je v skladu s 15. delom pravil FCC. Pri delovanju morata biti upoštevana naslednja pogoja: • ta naprava ne sme povzročati škodljivih motenj; in • ta naprava mora sprejemati katere koli prejete motnje, vključno z motnjami, ki lahko povzročajo neželeno delovanje. Ta oprema je preizkušena in v skladu s 15. delom pravil FCC ustreza omejitvam za digitalne naprave razreda B.
Varnostne informacije • Preden namestite monitor, natančno preberite vso dokumentacijo, priloženo v škatli. • Da preprečite nevarnost požara ali električnega udara, monitorja nikoli ne izpostavljajte dežju ali vlagi. • Nikoli ne poskušajte odpreti ohišja monitorja. Nevarne visoke napetosti v monitorju lahko povzročijo resne fizične poškodbe. • Če pride do okvare napajanja, je ne poskušajte odpraviti sami. Obrnite se na kvalificiranega servisnega tehnika ali svojega prodajalca.
Vzdrževanje in čiščenje • Preden dvignete ali premaknete monitor, priporočamo, da odklopite kable in napajalni kabel. Pri postavitvi monitorja upoštevajte načine pravilnega dviga. Ko monitor dvignete ali nosite, ga primite za robove. Zaslona ne dvigajte tako, da ga primete za stojalo ali kabel. • Čiščenje. Izklopite monitor in odklopite napajalni kabel. Površino monitorja očistite z neabrazivno krpo brez vlaken. Trdovratne madeže lahko odstranite s krpo, ki jo navlažite z nežnim čistilom.
Kje so na voljo dodatne informacije Za dodatne informacije in posodobitve izdelka ter programske opreme glejte naslednje vire. 1. Spletna mesta ASUS Spletna mesta ASUS po vsem svetu zagotavljajo posodobljene informacije o izdelkih strojne in programske opreme ASUS. Pojdite na spletno mesto http://www.asus.com. 2. Dodatna dokumentacija V škatli z izdelkom je lahko priložena dodatna dokumentacija, ki jo lahko doda prodajalec. Ti dokumenti niso del standardnega paketa.
viii
1.1 Pozdravljeni! Hvala, ker ste kupili monitor LCD ASUS®. Najnovejši širokozaslonski monitor LCD ASUS zagotavlja ostrejši, širši in svetlejši zaslon, poleg tega pa še veliko funkcij, ki izboljšujejo izkušnjo gledanja. S temi funkcijami boste uživali, ker zagotavljajo priročnost in čudovito vizualno izkušnjo monitorja. 1.
1.3 Predstavitev monitorja 1.3.1 Prikaz od spredaj 1 1. 2. 3. Gumb 5. 3 4 5 6 : • Izbere želeni način prednastavitve. • Zapre meni OSD ali vas vrne na prejšnji meni, ko je meni OSD aktiven. Gumb : • Zmanjša vrednosti ali premakne vašo izbiro v levo/navzdol. • Bližnjična tipka GamePlus. Pritisnite potrebne funkcije. , da izberete MENU za potrditev Gumb MENU: • 4. 2 Vklopi meni OSD. Izvede izbran menijski element OSD.
6. Gumb/indikator za vklop/izklop • Vklopi/izklopi monitor. • Definicije barv indikatorja vklopa/izklopa so navedene v spodnji tabeli. Stanje Opis Sveti modro VKLOPLJENO Sveti oranžno Način pripravljenosti IZKLOPLJENO IZKLOPLJENO 1.3.2 Prikaz od zadaj 4 6 Priključki na zadnji strani 1. Vrata AC-IN. V ta vrata priključite napajalni kabel. 2. DisplayPort. V ta vrata lahko priključite združljivo napravo DisplayPort. 3. Vrata DVI (Dual-Link).
1.3.3 Funkcija GamePlus Funkcija GamePlus zagotavlja komplet orodij in ustvarja boljše okolje za igranje za uporabnike, ki igrajo različne vrste iger. Poleg tega je funkcija Aimpoint (Ciljna točka) posebej oblikovana za nove igralce ali začetnike, ki jih zanimajo Prvoosebne strelske igre (FPS). Funkcijo GamePlus aktivirate tako: 1-4 1. Pritisnite bližnjično tipko GamePlus. 2. Pritisnite , da izberete med funkcijama Aimpoint (Ciljna točka) in Timer (Časovnik). 3.
Monitor LCD ASUS VG248QE Series 1-5
1-6 1.
2.1 Pritrditev ročice/podstavka monitorja Podstavek monitorja pritrdite tako: 1. Monitor položite na mizo s sprednjo stranjo obrnjeno navzdol. 2. Ročico zasukajte za 90 stopinj v obratni smeri urinega kazalca. (slika 1) 3. Podstavek še dodatno pritrdite na ročico tako, da privijete vijak iz kompleta. (slika 2) (slika 3) 4. Puščično oznako na podstavku poravnajte z vijakoma, da omogočite 90-stopinjsko obračanje v levo ali desno.
2.3 Odstranjevanje ročice (za stensko montažo VESA) Snemljiva ročica tega monitorja je posebej oblikovana za stensko montažo VESA. Postopek snemanja ročice: 1. Monitor položite na mizo s sprednjo stranjo obrnjeno navzdol. 2. Odvijte štiri vijake na hrbtni strani monitorja, nato pa odstranite ročico/ podstavek. Priporočamo, da na mizo razprostrete mehko krpo, da preprečite poškodbo monitorja. 2-2 2.
2.4 Priključitev kablov Kable priključite z upoštevanjem spodnjih navodil: Displayport AC-IN HDMI DVI Earphone jack Audio-in • Priključitev napajalnega kabla: en konec napajalnega kabla priključite v vhodna vrata za izmenični tok na monitorju, drugi konec pa v električno vtičnico. • Priključitev kabla DVI/HDMI/DisplayPort: a. En konec kabla DVI/HDMI DisplayPort priključite v vrata DVI/HDMI/ DisplayPort na monitorju. b.
2-4 2.
3.1 OSD (Zaslonski meni) 3.1.1 Način konfiguriranja 1. Za aktiviranje menija OSD pritisnite gumb MENU. 2. Za pomikanje med funkcijami pritisnite in . Označite želeno funkcijo in pritisnite gumb MENU, da jo aktivirate. Če ima izbrana funkcija pomeni, znova pritisnite in , da se pomaknete med funkcijami podmenija. Označite želeno funkcijo podmenija in pritisnite gumb MENU, da jo aktivirate. 3. Če želite spremeniti nastavitve izbrane funkcije, pritisnite . 4.
2. Color (Barva) Na tem meniju lahko prilagodite nastavitve Brightness (Svetlost), Contrast (Kontrast), Saturation (Nasičenost), Color Temp. (Barvna temperatura), Skin Tone (Kožni odtenek) in Smart View. • Brightness (Svetlost): območje prilagoditve je od 0 do 100. je bližnjična tipka za aktiviranje te funkcije. • Contrast (Kontrast): obseg prilagoditve je od 0 do 100. • Saturation (Nasičenost): obseg prilagoditve je od 0 do 100. • Color Temp.
4. Input Select (Izbira vhoda) S to funkcijo lahko izberete želeni vhodni vir. 5. System Setup (Nastavitev sistema) • Omogoča prilagoditev sistema. Splendid Demo Mode: razdeli zaslon na dva dela za primerjalni način Splendid. • Volume (Glasnost): obseg prilagoditve je od 0 do 100. • ECO Mode: zmanjša porabo energije. • OSD Setup (Nastavitev menija OSD): * Prilagodi vodoravni položaj (H-Position)/navpični položaj (V-Position) menija OSD od 0 do 100.
3.2 Povzetek tehničnih podatkov Vrsta zaslona Velikost zaslona Največja ločljivost Slikovna točka Svetlost (značilna) Kontrastno razmerje (značilno) Kontrastno razmerje (največje) Kot gledanja (V/N) CR>10 Barve na zaslonu Odzivni čas Video izboljšava SPLENDID™ izbira SPLENDID™ Temperatura (delovna) TFT LCD 24-palčni široki zaslon (16:9, 60,97 cm) 1920 x 1080 0,270 mm 350 cd/m2 1000:1 80.000.
Pripomočki Upravna potrdila Kabel DVI (Dual-Link), kabel za zvok, napajalni kabel, Vodnik za hitri začetek, garancijska kartica CB, CE, Gost-R, CCC, UL/cUL, FCC, C-Tick, BSMI, VCCI, RoHS, WEEE, Hygenic, J-MOSS, ErP, PSE, UKrSEPRO, Windows 7 WHQL, Windows 8 WHQL *Tehnični podatki se lahko spremenijo brez obvestila.
3.3 Odpravljanje težav (pogosta vprašanja) Težava Možna rešitev Lučka LED za vklop/izklop ni vklopljena • Pritisnite gumb , da preverite, ali je monitor VKLOPLJEN. • Preverite, ali je napajalni kabel pravilno priključen v monitor in električno vtičnico. Lučka LED sveti oranžno, na zaslonu • Preverite, ali sta monitor in računalnik pa ni slike VKLOPLJENA. • Preverite, ali je signalni kabel pravilno priključen v monitor in računalnik. • Preglejte, ali je katera od nožic na signalnem kablu zvita.
3.
Frekvenca ločljivosti Hitrost osveževanja Vodoravno 1920 x 1080 60 Hz 1920 x 1080 60 Hz 66,587 KHz 67,5 KHz 1920 x 1080* (DVI/DP) 85 Hz 95,43 KHz (2D) 1920 x 1080* (DVI/DP) 144 Hz 158,11 KHz (2D) 1920 x 1080* (DVI/DP) 100 Hz 113,3 KHz (2D)/113,8 KHz (3D) 1920 x 1080* (DVIDP) 120 Hz 137,2 KHz (2D/3D) 640 x 480P (HDMI) 59,94/60 Hz 31,469 KHz/31,5 KHz 720 x 480P (HDMI) 59,94/60 Hz 31,469 KHz/31,5 KHz 720 x 576P (HDMI) 50 Hz 31,25 KHz 1280 x 720P (HDMI) 50 Hz 37,5 KHz 1280 x 720P
Monitor LCD ASUS VG248QE Series 3-9
3-10 3.