Owner manual

2-192-19
2-192-19
2-19
ASUS Vintage-PH1ASUS Vintage-PH1
ASUS Vintage-PH1ASUS Vintage-PH1
ASUS Vintage-PH1
5. Connect a power cable from
the power supply to the
power connector at the back
of the CD-ROM. Use the cable
with the white connector.
6. Connect one end of the IDE
ribbon cable to the IDE
interface at the back of the
CD-ROM, matching the red
stripe on the cable with Pin 1
on the IDE interface.
7. Connect one end of the
CD-ROM audio cable to the
4-pin connector at the back of
the CD-ROM.
8. Connect the other end of the
IDE ribbon cable to the IDE
connector on the motherboard.
9. Connect the other end of the
audio cable to the black 4-pin
connector labeled CD on the
motherboard.
Red stripe to pin 1Red stripe to pin 1
Red stripe to pin 1Red stripe to pin 1
Red stripe to pin 1
IDE ribbon cableIDE ribbon cable
IDE ribbon cableIDE ribbon cable
IDE ribbon cable
Power cablePower cable
Power cablePower cable
Power cable
CD-ROM audio cableCD-ROM audio cable
CD-ROM audio cableCD-ROM audio cable
CD-ROM audio cable
Primary IDE connectorPrimary IDE connector
Primary IDE connectorPrimary IDE connector
Primary IDE connector