Owner manual

2-212-21
2-212-21
2-21
ASUS Vintage-PH1ASUS Vintage-PH1
ASUS Vintage-PH1ASUS Vintage-PH1
ASUS Vintage-PH1
5. Connect a power cable from
the power supply to the
power connector at the back
of the HDD. Use the cable with
the white connector.
6. Connect the IDE hard disk
ribbon cable to the IDE
interface at the back of the
HDD, matching the red stripe
on the cable with Pin 1 on the
IDE interface.
Red stripe to Pin 1Red stripe to Pin 1
Red stripe to Pin 1Red stripe to Pin 1
Red stripe to Pin 1
IDE ribbon cableIDE ribbon cable
IDE ribbon cableIDE ribbon cable
IDE ribbon cable
Power cablePower cable
Power cablePower cable
Power cable
7. Connect the other end of the
IDE ribbon cable to the primary
IDE connector on the
motherboard.
Primary IDE connectorPrimary IDE connector
Primary IDE connectorPrimary IDE connector
Primary IDE connector