User's Manual

20
VivoMini UN Series
Your VivoMini comes with two SO-DIMM memory slots that allow
you to install two 2 GB, 4 GB, or 8 GB unbuered with non-ECC 1.35 V
DDR3204-pinSO-DIMMsforamaximumof16GBmemory.
IMPORTANT!
• Itisrecommendedthatyoureplacethememorymodules
under professional supervision. Visit an ASUS service center for
further assistance.
• Refertohttp://www.asus.com for the list of compatible DIMMs.
You can only install 1.35 V DDR3 SO-DIMM to the VivoMini’s
DIMM slots.
To install or upgrade the memory modules:
1. Turn o your VivoMini then disconnect all cables and peripherals.
2. Place the VivoMini on a at stable surface, with its top side facing
down.
WARNING!
• Ensurethatyourhandsaredrybeforeproceedingwiththerest
of the installation process.
• Beforeinstallingmemorymodules,useagroundedwriststrap
or touch a safely grounded object or metal object to avoid
damaging them due to static electricity.
Upgrading memory modules