User Manual

10. Place the rubber foot on each screw hole. Refer to the illustration for more details.

IMPORTANT! A number is printed under each rubber foot and this number corresponds

to that rubber foot’s location on the cover. Follow the orientation of each rubber foot

and the number sequence shown in the illustration below. The rubber foot ts in only

one orientation. Note the position of the hole on each rubber foot, as shown in the

illustration below

NOTE: If you want to remove the rubber foot, use a athead screwdriver or a

straightenedpapercliptodoso.

9. Reattach the screws to secure the cover back on the bottom side of the main box.