User Manual

ManualsBrandsAsus ManualsMini PCsVivoMini UN62V

Windows

7 and USB 3.0 driver installation for 100 Series

Based on the chipset specication, the 100 series requires USB 3.0 drivers to be preloaded in order

to use USB keyboard/mouse during Windows

7 installation. This section is a guide on preloading

USB 3.0 drivers and installing Windows

Method 1: Using SATA ODD & USB devices

Load USB 3.0 drivers using the ASUS support DVD and install Windows

7 using a USB device.

1. Insert the Windows

7 installation DVD into a USB ODD, or copy all les on the Windows

installation DVD to a USB storage device on a working system.

2. Connect the USB ODD or USB storage device to your 100 series platform.

3. Insert the ASUS support DVD into a SATA ODD on your 100 series platform.

4. Power on your system and press F8 during POST (Power-On Self Test) to enter the boot

screen.

5. Select the USB ODD or USB storage device as the boot device.

Windows

7 and USB 3.0 driver installation for 100 Series

DE160

First Edition

June 2015

Requirement:

• 1 x ASUS support DVD

• 1 x Windows

7 installation source

• 1 x SATA ODD

• 1 x USB device (ODD or storage)

The USB storage device requires 8 GB or more capacity. It is recommended to format the storage

device before use.

Summary of content (6 pages)

PAGE 1
DE160 First Edition June 2015 Windows® 7 and USB 3.0 driver installation for 100 Series Based on the chipset specification, the 100 series requires USB 3.0 drivers to be preloaded in order to use USB keyboard/mouse during Windows® 7 installation. This section is a guide on preloading USB 3.0 drivers and installing Windows® 7. Method 1: Using SATA ODD & USB devices Load USB 3.0 drivers using the ASUS support DVD and install Windows® 7 using a USB device.
PAGE 2
6. The USB 3.0 driver will be loaded automatically during installation startup. The “Setup is starting...” screen will show up if the USB 3.0 driver is loaded correctly. 7. Follow the onscreen instructions to complete the Windows® 7 installation. Method 2: Using a modified Windows® 7 ISO Load USB 3.0 drivers and install Windows® 7 using a modified Windows® 7 installation DVD. Requirement: 1.
PAGE 3
7. Select the ODD as the boot device. 8. The USB 3.0 driver will be loaded automatically during installation startup. The “Setup is starting...” screen will show up if the USB 3.0 driver is loaded correctly. 9. Follow the onscreen instructions to complete the Windows® 7 installation.
PAGE 4
- Check I agree and then click Next. - Select the source of the Windows® 7 installation disk then click Next. - Select the USB storage device and click next. Click the refresh icon if the USB storage device is not displayed. -C lick Yes to clear the contents on the USB storage device and create a bootable USB device. Make sure to backup contents on the USB storage device, as it will be formatted. 4 - Once completed, click OK to finish. Windows® 7 and USB 3.
PAGE 5
• Windows® 7 OS disk to ISO file - Select Windows 7 OS disk to ISO file then click Next. - Check I agree and then click Next. - Select the source of the Windows® 7 installation disk then click Next. Windows® 7 and USB 3.
PAGE 6
- Select the folder to save the modified Windows® 7 installation ISO file and click Next. - Once completed, click OK to finish. - Burn this ISO file onto an empty DVD to create a modified Windows® 7 installation DVD. 4. Insert the modified Windows® 7 installation DVD into an ODD or connect the USB storage device with modified Windows® 7 installation files onto your 100 series platform. 5. Power on your system and press F8 during POST (Power-On Self Test) to enter the boot screen. 6.