User's Manual

34 VC66-C Series
Installing 2.5” HDD or SSD
NOTE:
• Thisbaysupports7mm/9.5mm2.5”HDDs/SSDs.
• Somemodelsmayonlysupportone(1)HDD/SSD.
1. Remove four (4) screws from the HDD/SSD bracket.
2. Remove the HDD/SSD bracket.
3. Remove the cable from the holder, then remove the holder from the
HDD/SSD bracket.
NOTE:
• Ensuretoremovetheholderfromthebracketwheninstalling
an HDD/SDD to the bracket.
• Theavailablilityoftheholdermayvarydependingonthe
model type, country, or region.