User's Manual

VivoMini VC66 Series

5. To install a new HDD/SSD, secure the HDD/SSD to the bracket

using the bundled four (4) screws.

6. Connect the cable to the HDD/SSD, then align the bracket to

the HDD/SSD compartment of your VivoMini and secure the

bracket with the screws previously removed.

7. Follow steps 10-11 under the Upgrading memory modules

section to replace the top cover of your VivoMini.

NOTE:

• Ensuretoremovetheholderfromthebracketwheninstallingan

HDD/SDD to the bracket.

• Theavailablilityoftheholdermay vary depending on the model

type, country, or region.