User Guide

Vivo DualBay Adapter
3
Installing 2.5-inch HDDs/SSDs
IMPORTANT: Ensure to turn o your VivoMini and disconnect all
cables and peripherals before installing any device or components.
To install 2.5-inch HDDs/SSDs to the Vivo DualBay adapter:
1. Place the VivoMini on a stable and at surface.
2. Press down the latch at the rear panel to release the top cover
of the VivoMini.
3. Slide the top cover towards the rear of VivoMini until it is
detached from the chassis.
4. Remove the cover and set it aside.