E7895 VivoTab User Manual ASUS is devoted to creating environment-friendly products and packaging to safeguard consumers’ health while minimizing the impact on the environment. The reduction of the number of the manual pages complies with the reduction of carbon emission. For the detailed user manual and related information, refer to the user manual included in the VivoTab or visit the ASUS Support Site at http://support.asus.com/.
Charging your batteries Ensure to fully charge your battery pack before using your VivoTab in battery mode for extended periods. Remember that the power adapter charges the battery pack as long as it is plugged into an AC power source. Be aware that it takes much longer to charge the battery pack when the VivoTab is in use. IMPORTANT! Do not leave the VivoTab connected to the power supply once it is fully charged. VivoTab is not designed to be left connected to the power supply for extended periods of time.
Package contents Micro USB cable VivoTab Power adapter Technical documentations and warranty card Cleaning cloth NOTES: • If any of the items is damaged or missing, contact your retailer. • The bundled power adapter varies with country or region.
Your VivoTab Front view Front camera This built-in 2-megapixel camera allows you to take pictures or record videos using your VivoTab. Camera indicator The camera indicator lights up when either of the built-in cameras is in use. Ambient light sensor The ambient light sensor detects the amount of light in your environment. It allows the system to automatically adjust the brightness of the display depending on the ambient light condition.
Touch screen panel The touch screen panel allows you to operate your VivoTab using touch gestures or a stylus pen. Windows® 8 touch button Touch this button to go back to the Start screen. If you are already in the Start screen, touch this button to go back to the last app you opened.
Rear view Headphone output/microphone input combo jack port This port allows you to connect the VivoTab’s audioout signal to amplified speakers or headphones. You can also use this port to connect your VivoTab to an external microphone. IMPORTANT! For microphone input function, the jack only supports headset microphone. Volume button Press this button to increase or decrease the volume.
Manual reset hole If the system becomes unresponsive, insert a straightened paper clip into the hole to force-restart your VivoTab. IMPORTANT! Forcing the system to restart may result to data loss. We strongly recommend that you back up your data regularly. Microphone The built-in mono microphone can be used for video conferencing, voice narrations or simple audio recordings. Camera LED flash Use the LED flash when taking pictures or recording videos in a low-light environment.
Rear camera This built-in 8-megapixel camera allows you to take high-definition pictures or record high-definition videos using your VivoTab. Power button Press the power button to turn your VivoTab on, put it to sleep or hibernate and wake it up from sleep or hibernate mode. Press and hold the power button for about five (5) seconds to force shut down your VivoTab when it becomes unresponsive. IMPORTANT! Forcing the system to restart may result to data loss.
Micro HDMI port This port is for a micro HDMI (High-Definition Multimedia Interface) connector and is HDCP compliant for HD DVD, Blu-ray and other protected content playback. MicroSD card slot The VivoTab comes with a built-in memory card reader slot that supports microSD, microSDHC and microSDXC card formats. Built-in NFC (Near Field Communication) tag The built-in NFC tag allows you to conveniently share contacts, pictures, business cards, and other files.
Charging your VivoTab To charge your VivoTab: Connect the micro USB cable to the power adapter. Plug the micro USB connector into your VivoTab. Plug the power adapter into a grounded socket outlet.
IMPORTANT! • Use only the bundled power adapter and micro USB cable to charge your VivoTab. Using a different power adapter may damage your VivoTab. • Peel the protective film off from the power adapter and micro USB cable before charging the VivoTab to prevent risk or injury. • Ensure that you plug the power adapter to the correct socket outlet with the correct input rating. The output voltage of this adapter is DC5V, 2A. • Do not leave the VivoTab connected to the power supply once it is fully charged.
Appendices Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules.
• Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. The antenna(s) used for this transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves.
Canada, Industry Canada (IC) Notices This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The IC ID for this device is 3568A-K0X.
Canada, avis d’Industrie Canada (IC) Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement. L’identifiant IC de cet appareil est 3568A-K0X.
Pour des informations supplémentaires concernant l’exposition aux RF au Canada rendez-vous sur : http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html EC Declaration of Conformity This product is compliant with the regulations of the R&TTE Directive 1999/5/EC. The Declaration of Conformity can be downloaded from http://support.asus.com. Limitation of Liability Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY. Prevention of Hearing Loss To prevent possible hearing damage, do not listen at high volume levels for long periods.
CE Mark Warning CE marking for devices without wireless LAN/ Bluetooth The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”. RF Exposure information (SAR) - CE This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
For next-to-body operation, this device has been tested and meets the ICNRP exposure guidelines and the European Standard EN 62311 and EN 62209-2. SAR is measured with the device directly contacted to the body while transmitting at the highest certified output power level in all frequency bands of the mobile device. Power Safety Requirement Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power cords greater than or equal to: H05VV-F, 3G, 0.
Coating notice IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is applied to insulate the device except on the areas where the I/O ports are located. IDA Singapore Standard The Infocomm Development Authority of Singapore (IDA) certifies that this product passed the standards and regulations.
Proper disposal Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. DO NOT throw the VivoTab in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
Copyright Information No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or tranPadd into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). ASUS and VivoTab logo are trademarks of ASUSTek Computer Inc. Information in this document is subject to change without notice.