VK248 LCD Monitor User Guide MENU
First Edition Novermber 2016 Copyright © 2016 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Notices.......................................................................................................... iv Safety information........................................................................................ v Care & Cleaning........................................................................................... vi Takeback Services...................................................................................... vii Chapter 1: Product introduction 1.1 Welcome! .......
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
viii
1.1 Welcome! Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a broader, brighter and crystal-clear display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you! 1.
1.4 Monitor introduction 1.4.1 Front view HD Webcam MENU 1 1. 2 3 4 5 6 button: • Selects a desired preset mode. • Exits the OSD menu or goes back to the previous menu when the OSD menu is active. • Automatically adjusts the image to its optimized position, clock, and phase by pressing this button for 2-4 seconds (for VGA mode only). • Decreases values or moves your selection left/down. • Activates the QuickFit function.(Please refer to 1.4.3 QuickFit Function). 2. 3.
4. Press (Input Select button) to display HDMI signals after you connect HDMI cable with the monitor. • Increases values or moves your selection right/up. • Brightness hotkey • Selects an available input source. button: 5. Power button/power indicator 6. • Turns the monitor on/off. • The color definition of the power indicator is as the below table. 1.4.2 Status Description Blue Amber OFF ON Standby mode OFF Back view 4 6 7 Rear connectors 1. AC-IN port.
1.4.3 QuickFit Function The QuickFit function allows users have a preview of the document or photo layout directly on screen without printing test copies. To activate QuickFit, press the QuickFit hotkey, and then press the MENU key to switch between different pattern sizes. Alignment Grid Letter Photo 4x6, 3x5, 2x2 Photo 8x10, 5x7 When QuickFit is activated, press the control buttons on the front panel to make adjustments.
ASUS VK248 Series LCD Monitor 1-5
1-6 Chapter 1: Product introduction
2.1 Assembling the monitor arm/base To assemble the monitor base: 1. Have the front of the monitor face down on a table. 2. Attach the base into the arm, making sure the tab on the arm fits into the groove on the base. 3. Fix the base to the arm by fastening the bundled screw. We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. 2.
It is normal that the monitor slightly shakes while you adjust the viewing angle. Pivoting the monitor 1. Lift the monitor to the highest position. 2 Tilt the monitor to its maximum angle. 3. Pivot the monitor to the angle you need. -5° ~ +3 3° 0° 0° 90° 90° MENU MENU MENU MENU 100mm It is normal that the monitor slightly shakes while you adjust the viewing angle.
2.3 Detaching the arm/base (for VESA wall mount) The detachable arm/base of this monitor is specially designed for VESA wall mount. To detach the arm/base: 1. Have the front of the monitor face down on a table. 2. Remove the rubbers in the four screw holes. (Figure 1) 3. Use a screwdriver to remove the four screws on the arm (Figure 2), then slide out the arm/base to detach it from the monitor (Figure 2).
2.4 1. Connecting the cables Connect the cables as the following instructions: Audio-in USB 2.0 HDMI Earphone jack DVI VGA • To connect the audio cable: connect one end of the audio cable to the monitor’s Audio-in port, the other end to the computer’s audio-out port. • To connect the power cord: connect one end of the power cord securely to the monitor’s AC input, the other end to a power outlet. • To connect the VGA/DVI/HDMI cable: a.
2. Gather all the cables with the cable management slot. Cable management slot 2.5 Turning on the monitor Press the power button . See page 1-2 for the location of the power button. The power indicator lights up in blue to show that the monitor is ON.
2-6 Chapter 2: Setup
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure 1. Press the MENU button to activate the OSD menu. VK248 Splendid Scenery Mode Standard Mode Blue Light Filter Theater Mode , and to Press navigate through the functions. Highlight the desired function and press the MENU button to activate it. If the function selected has a suband menu, press again to navigate through the sub-menu functions. Highlight the desired submenu function and press the MENU button to activate it. 2.
In the Standard Mode, the ASCR, Saturation and Sharpness functions are not user-configurable. 2. Blue Light Filter In this function, you can adjust the blue light filter level. • Level 0: No change. • VK248 Splendid Level 0 Level 1 Blue Light Filter Level 2 Level 3 Color Level 4 Image Level 1~4: The higher the level, the less blue light is scattered. When Blue Light Filter is activated,the default settings of Standard Mode will be automatically imported.
4. Image VK248 Splendid You can adjust Sharpness, Trace Free, Aspect Control, ASCR, Position (VGA only), and Focus (VGA only) from this menu. • Sharpness: the adjusting range is from 0 to 100. Blue Light Filter Color Sharpness 27 Trace Free 100 Aspect Control Full ASCR OFF Position Image F o cu s Input Select System Setup Move Menu Exit • Trace Free: adjusts the response time of the monitor. • Aspect Control: adjusts the aspect ratio to full, 4:3, 1:1 or OverScan.
• * Adjusts the horizontal position (H-Position)/the vertical position (V-Position) of the OSD from 0 to 100. * Adjusts the OSD timeout from 10 to 120 seconds. * Enables or disables the DDC/CI function. * Adjusts the OSD background from opaque to transparent. • Information: shows the monitor information. • Language: there are 10 languages for your selection, including English, German, Italian, French, Dutch, Spanish, Russian, Traditional Chinese, Simplified Chinese, and Japanese.
3.2 Specifications summary Panel Type Panel size Max. Resolution Pixel pitch Brightness (Typ.) Contrast Ratio (Typ.) Contrast Ratio (Max.
Accessories Compliance and Standards VGA cable, DVI cable, USB cable, audio cable, power cord, Quick start guide, warranty card, LifeFrame 2 CD Energy Star, CB, CE, RCM, RoHS, WEEE, ErP, Windows 7 WHQL, Windows 8.1 WHQL, Windows 10 WHQL *Specifications are subject to change without notice. 3.
No sound or sound is low 3.4 Resolution Frequency • Ensure that the HDMI cable is properly connected to the monitor and the computer. • Adjust the volume settings of both your monitor and HDMI device. • Ensure that the computer sound card driver is properly installed and activated.
* Modes not listed in the table may not be supported. For optimal resolution, we recommend that you choose a mode listed in the table above. * This monitor supports full HD (480p, 576p, 720p, 1080i/p) video content from game consoles, DVD players and other consumer video devices via HDMI.