Serie VP227HE Monitor LCD Guía del usuario
Tabla de contenido Certificación TCO........................................................................................ iii Avisos........................................................................................................... iv Información de seguridad........................................................................... vi Limpieza y mantenimiento........................................................................ viii 1.1 ¡Bienvenido!............................................
Certificación TCO A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Avisos Declaración de la Comisión Federal de Comunicaciones (FCC, Federal Communications Commission) Este dispositivo cumple la Parte 15 de las Reglas de la FCC. Su funcionamiento está sujeto a dos condiciones: • Este dispositivo no puede causar interferencias perjudiciales, y • Este dispositivo debe aceptar cualquier interferencia recibida, incluida la interferencia que pueda causar un funcionamiento no deseado.
Declaración de conformidad Este dispositivo cumple los requisitos establecidos en la Directiva del Consejo sobre la aproximación de las leyes de los Estados miembros en relación con la compatibilidad electromagnética (2014/30/UE), la directiva de baja tensión (2014/35/UE), la directiva ErP (2009/125/EC) y la directiva RoHS (2011/65/UE).
Información de seguridad • • • • • • • • • • • • • • • • vi Antes de instalar el monitor, lea atentamente toda la documentación incluida en el paquete. Para evitar incendios o descargas eléctricas, no exponga el monitor a la lluvia ni a la humedad. No abra la carcasa del monitor. En el interior del mismo hay componentes con voltaje alto y peligroso que puede provocar graves daños personales. Si la fuente de alimentación se avería, no intente arreglarla usted mismo.
ADVERTENCIA El uso de otros auriculares o audífonos que no sean los especificados puede producir pérdida de audición debido a las presiones de sonido excesivas. Por favor, confirme que el sistema de distribución en la instalación del edificio debe proporcionar el interruptor del circuito con una capacidad de 120/240 V, 20A (máximo). Si el cable de alimentación dispone de un enchufe de 3 clavijas, conéctelo a una toma de corriente de tres clavijas con conexión a tierra.
Limpieza y mantenimiento • Antes de levantar o reparar el monitor, debe desconectar los cables y el cable de alimentación. Siga las técnicas correctas para levantar el monitor cuando lo coloque. Cuando levante o transporte el monitor, agárrelo por los bordes. No levante la pantalla por la base ni el cable de alimentación. • Limpieza. Apague el monitor y desenchufe el cable de alimentación. Limpie la superficie del monitor con un paño sin pelusas y no abrasivo.
Dónde encontrar más información Consulte las siguientes fuentes para obtener información adicional y las actualizaciones del software. 1. Sitios Web de ASUS Los sitios Web de ASUS en todo el mundo proporcionan información actualizada del hardware y los productos de software de ASUS. Consulte el sitio Web http://www.asus.com 2. Documentación opcional El paquete del producto puede incluir documentación opcional que puede haber agregado su distribuidor. Estos documentos no forman parte del paquete estándar.
1.1 ¡Bienvenido! ¡Gracias por adquirir el monitor LCD de ASUS®! Los monitores LCD panorámicos más modernos de ASUS proporcionan una visualización más nítida, clara y brillante, además de una gran cantidad de funciones que mejoran la experiencia de visualización. ¡Con estas funciones, disfrutará de la comodidad y la experiencia visual agradable que proporciona el monitor! 1.
1.3 Ensamblar el monitor Para ensamblar el monitor 1. Coloque la pantalla sobre un paño encima de una mesa. Use un destornillador para apretar los tornillos de ensamblaje y asegure el brazo a la pantalla firmemente. A continuación, acople la tapa de la bisagra al cuerpo del monitor, acople la base al brazo y realice la fijación con el tornillo para que ambas piezas queden firmemente unidas. Puede apretar fácilmente el tornillo con los dedos. 2. Ajuste el monitor con el ángulo que le resulte más cómodo.
1.4 Conectar los cables 1.4.1 Parte posterior del monitor LCD HDMI VGA 4 1 1. Puerto de entrada de CA 2. Puerto HDMI 3. Puerto VGA 4.
Instalación 1. Apague el equipo y desenchufe el cable de alimentación del mismo. 2. Conecte el cable de señal a la toma de entrada HDMI (opcional) y/o VGA (opcional) del monitor y a la toma de salida HDMI (opcional) y/o VGA (opcional) de la tarjeta gráfica del equipo. A continuación, apriete los tornillos del conector del cable de señal. 3. Inserte el cable de alimentación del monitor en el puerto de alimentación situado en la parte posterior de dicho monitor. 4.
• Las especificaciones del CABLE DE ALIMENTACIÓN se refieren a la página v. • Para la instalación de las piezas reemplazables, consulte las instrucciones de instalación anteriores. • Los usuarios pueden ir a la red de servicio local para reemplazar o comprar las piezas reemplazables aptas. • Para conocer los centros de servicio locales y los contactos de servicio, consulte el sitio web https://www.asus.com/support.
1.5 Presentación del monitor 1.5.1 Utilizar los botones de control Utilice los botones de control situados en la parte posterior del monitor para ajustar la configuración de la imagen. 5 2 Menú Cerrar Apagar 3 4 Selección de entrada Brillo 6 1 1. Indicador de encendido: • 2. 5. 6. 1-6 Descripción Blanco ENCENDER Ámbar Modo de espera APAGAR APAGAR Presione este botón para entrar en el menú OSD. Botón Izquierda: • 4. Estado Botón Centro: • 3.
• Botón de acceso directo de bloqueo de botones. Presione sin soltar este botón durante 5 segundos para habilitar y deshabilitar el bloqueo de teclas. Puede presionar la tecla de 5 direcciones en cualquier dirección para encender el monitor.
2.1 Desmontar el brazo y la base (para el soporte para pared VESA) El brazo desmontable de este monitor LCD está especialmente diseñado para soportes para pared VESA. Para desmontar el brazo y la base 1. Desconecte los cables de alimentación y señal. Coloque la parte frontal del monitor boca abajo y con cuidado sobre una mesa despejada. 2. Utilice los dedos para aflojar el tornillo situado en la parte inferior de la base y fije esta desde el pedestal.
2.2 Ajustar el monitor • Para conseguir la mejor visualización posible, es recomendable mirar a toda la superficie del monitor y, a continuación, ajustarlo con el ángulo que le resulte más cómodo. • Sujete la base para impedir que el monitor se caiga cuando cambie su ángulo. • Puede ajustar el ángulo del monitor entre +23˚ y -5˚. -5 ~ 23 Es normal que el monitor tiemble ligeramente mientras ajusta el ángulo de visualización.
3.1 Menú en pantalla (OSD) 3.1.1 Cómo realizar la reconfiguración Splendid ASUS VP227 Modo Escenario HDMI 1920x1080 @75Hz Modo Estándar Modo sRGB Modo Escenario Modo Cine Modo Juego Modo Noche Modo De Lectura Modo Sala Oscura 1. Pulse el botón Menú para activar el menú OSD. 2. Presione los botones y para alternar entre las opciones de Menú. A medida que pase de un icono a otro, el nombre de opción se resaltará. 3. Para seleccionar el elemento resaltado en el menú, presione el botón central.
3.1.2 1. Presentación de las funciones OSD Splendid Esta función contiene ocho funciones secundarias que puede seleccionar según sus preferencias. Cada modo tiene la opción Reiniciar que permite mantener la configuración o recuperar el modo preestablecido.
2. EyeCare EyeCare ASUS VP227 Modo Escenario HDMI 1920x1080 @75Hz Filtro de luz azul Aviso de descanso Aumento de color • Filtro de luz azul: En esta función puede ajustar el filtro de luz azul de 0 al máximo. 0: sin cambios; Máx: Cuanto mayor sea el nivel, más luz azul se reducirá. Cuando la opción Filtro de luz azul está activada, la configuración predeterminada del modo estándar se importará automáticamente. Además del máximo nivel, el brillo se puede configurar por el usuario.
• 3-4 Aumento de color: El intervalo de aumento de color está comprendido entre 0 y 100. • Esta función no está disponible en modo sRGB: en Splendid. • Esta función no está disponible cuando se selecciona Rosado o Amarillento en el menú de Tono de piel.
3. Color Esta función permite seleccionar el color de la imagen que desea. Color ASUS VP227 Modo Escenario HDMI 1920x1080 @75Hz Brillo Contraste Saturación Temp del color Tono de piel • Brillo: El intervalo de ajuste está comprendido entre 0 y 100. • Contraste: El intervalo de ajuste está comprendido entre 0 y 100. • Saturación: El intervalo de ajuste está comprendido entre 0 y 100. • Temp del color: Contiene tres modos de color predefinidos (Frío, Normal y Cálido) y la opción Modo Usuario.
4. Imagen Desde esta función principal puede ajustar las siguientes opciones: Nitidez, Trace Free, Controle de Aspecto, VividPixel, ASCR, FreeSync, Posición (solamente VGA), Enfoque (solamente VGA) y SINTONIZ. AUTOMÁT. (solamente VGA). Imagen ASUS VP227 Modo Escenario HDMI 1920x1080 @75Hz Nitidez Trace Free Controle de Aspecto VividPixel ASCR FreeSync Posición Más Imagen ASUS VP227 Modo Escenario HDMI 1920x1080 @75Hz Atrás Enfoque SINTONIZ. AUTOMÁT.
• Posición: Permite ajustar las posiciones horizontal (Posición-H) y vertical (Posición-V) de la imagen. El intervalo de ajuste está comprendido entre 0 y 100 (solamente disponible para la entrada VGA). • Más: permite volver a la página siguiente de la configuración de imagen. • Atrás: permite volver a la página anterior de la configuración de imagen. • Enfoque: Permite reducir el ruido de las líneas horizontales y verticales de la imagen ajustando los parámetros Fase y Frecuencia.
5. Selección de entrada Seleccione la fuente de entrada entre las siguientes señales de entrada: VGA y HDMI. Selección de entrada ASUS VP227 Modo Escenario HDMI 1920x1080 @75Hz VGA HDMI 6. Config. Sistema Permite ajustar la configuración del sistema. Config. Sistema ASUS VP227 Modo Escenario HDMI 1920x1080 @75Hz Splendid Demo Mode GamePlus QuickFit ECO Mode Config. OSD Idioma Bloqueo de teclas Más Config.
• GamePlus: La función GamePlus proporciona un conjunto de herramientas y crea un entorno de juego mejorado para los usuarios cuando se reproducen diferentes tipos de juegos. Concretamente, la función Punto de mira está especialmente diseñada para jugadores nuevos y principiantes interesados en los juegos de disparo en primera persona (FPS, First Person Shooter). Para activar GamePlus: • Presione el botón GamePlus para entrar en el menú principal GamePlus.
2. Tamaño de fotografía: Permite a los fotógrafos y otros usuarios ver y editar sus fotografías de forma precisa a tamaño real en la pantalla. 4x6 3-10 3x5 2x2 • ECO Mode: permite activar el modo ecológico para ahorrar energía. • Config. OSD: Permite ajustar las opciones Temporizador OSD, DDC/CI y Transparencia para la pantalla OSD. • Idioma: Permite seleccionar el idioma OSD.
7. Acceso directo Seleccione esta opción para establecer dos botones de acceso directo. ASUS VP227 Modo Escenario HDMI 1920x1080 @75Hz Acceso directo Acceso directo 1 Filtro de luz azul Acceso directo 2 Splendid Brillo Selección de entrada Temp del color QuickFit GamePlus 8. • Acceso directo 1: el usuario puede seleccionar una de las siguientes opciones como botón de acceso directo: “Filtro de luz azul”, “Splendid”, “Brillo”, “Selección de entrada”, “Temp del color”, “QuickFit” o “GamePlus”.
3.2 Especificaciones Modelo Tamaño del panel 21,45” AN (54,48 cm) Resolución máxima 1920x1080 Brillo (típ.) 250 cd/m2 Relación de contraste intrínseco (típ.) 3000:1 Ángulo de visualización (CR≥ 10) +89/-89 (H), +89/-89 (V) (valor típico) Colores de visualización 16,7 M (8 bits) Tiempo de respuesta 5 ms (GTG) Entrada HDMI Sí Entrada D-Sub Sí Consumo en estado de ENCENDIDO Nota < 16 W* *Se basa en el estándar Energy Star 8.
3.3 Solucionar problemas (preguntas más frecuentes) Problema Solución posible El indicador LED de alimentación • Presione el botón para comprobar si el monitor no se ENCIENDE se encuentra en el modo ENCENDIDO. • Compruebe si el cable de alimentación está correctamente conectado al monitor y a la toma de corriente. • Compruebe la función Indicador de encendido en el menú principal OSD. Seleccione “ENCENDER” para iluminar el LED de alimentación.
3.
Tiempos SD/HD (solo entrada HDMI) HDMI 1.3, formatos CEA-861B, tiempo principales admitidos SD/HD (solo entrada HDMI) Resolución Tasa de actualización Frecuencia horizontal 640 x 480P 720x480P 720x576P 1280x720P 59,94 / 60Hz 59,94 / 60Hz 50Hz 50Hz 1280x720P 59,94 / 60Hz 31,469 / 31,5kHz 31,469 / 31,5kHz 31,25kHz 37,5kHz 44,955/45 kHz 1920 x 1080i 1920 x 1080i 50Hz 59,94 / 60Hz 28,125kHz 33,716 / 33,75kHz HDMI 1.